Thanks OAK, I was super confused. A tip that has helped me a lot is binding my sequences to mousewheel up and down. I scroll down for builders and up for spenders. It's really hard to avoid overcapping on resources if you try to put it all in one sequence. Plus that way my left hand can be 90% devoted to WASD
Thanks mate for explain it, still sad to see a very simple and usefull addon change to this complicated stuff, to much work for some of that just want a 3 spell rotation
Understood. I would direct you to my tutorial video for a very basic sequence that is clickable and may work with a controller. ruclips.net/video/fhDAiyquHI0/видео.html
I could barely understand how to write a macro before and now there’s all of these huge conditions. I guess I’m just gonna have to figure out playing the game without these macros that I got used to oh well.
@@oakensoul i’m not angry with you, but my macro was working perfectly fine. I’ve been using it for almost 2 seasons now. Everything has been great. I’ve gotten used to it but now I’m can’t use it anymore. It’s broken. You’re telling me I have to go and keep buying this I try understanding using it and nothing seems self-explanatory anymore. And the starting instructions on their changes didn’t really help.
Thanks Oak, its going to take me a bit to get used to making new macros with this new GSE. I believe I'll be moving from Pally and Sham this exp to Warrior so a whole new experience now :P
Subscribed! Seriously, your videos are like a lifeline for us train-wrecks who have been emotionally wrecked since the prepatch hit the servers! 😂 Thanks for creating these and for answering our desperate questions! Speaking of which, I have a question about modifiers-alt, ctrl, shift, ctrl+alt. Have these been moved to the macro sections now? If so, how often should we be adding those lines? I'm not a pro at sequences, but I vaguely remember a section in the old GSE, near the bottom by the trinkets, where I used to find these modifiers in the sequences. Unfortunately, I can't access that version anymore, which would have made things so much easier to show.
That's a hard question to answer. You really need to look at your sequence to determine where you want these modifiers. Like on my ret macro, I put my mod keys in the same block as my Holy Power spenders, so it will keep me from spending on things like divine storm, and instead cast a word of glory for instance.
I figure I'll need to go back to square one and add my talents on my hot bar as I used to. Then setup my hotkeys in sequence of use. Its been a long time since I did that but I do not see any way around this. I depended on others to help me out with simple gse setups now I won't be able to.
I think I remember from the previous version of GSE that you could 'Out of Combat' do some conditional branching. I thought I remembered that there was code you could use to detect buffs to make a TRUE or FALSE condition. Is this still possible? If so, how is it done / coded now?
Sounds like you're talking about variables. They are in there, read this. They are advanced and beyond my comprehension.. lol github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/Useful-Variables
Hmm, lots of bad news here for those of us who got used to having simple sequences bound to the easiest-to-press action bar buttons. I didn't even have too many, just one for my paladin (to cast Hammer of Wrath automatically when available, that was all), but it sounds like I'm going to have to give it up. Sad.
Watch some of my other videos. It's not the end of the world. GSE is still very much alive and kicking and working quite well. You just have to approach it a little differently, such as the keybinding.
Thank for putting all this together. However I have a question. I am using your Guardian Druid gse and it just feels like I am sitting there not doing any actions while I wait for gse to cycle. Is this how its gonna be from on? My dps is significantly less.
Can some one explain please, I have seq: 2 actions: 1. Cast spell 2. run macro. Sequence shouold automatically run both commands? I keybind seq but its realise action by block (1 preass - 1 block, 2nd press - second block). Its correctly?
Hi Oak, do you know how to add [nochanneling] in the new GSE macro? I could only add my spell under "Spell" when I create my action, and whatever I add in "Macro", it is not working.
[nochanneling] is a macro conditional. It will only work in macrotext blocks. Any sequence with macrotext blocks have to be used through a keybind which you do in the GSE main menu. You cannot /click any sequences that use macrotext. However, if you make a sequence that uses ZERO macrotext, you can create a macro through WoW's /macro interface that says /click [nochanneling] YOURSEQUENCENAME and that should be clickable. It can be hit or miss though. Watch this video ruclips.net/video/fhDAiyquHI0/видео.html for how to make that type of sequence.
Hi, Mr. Oak I see a tab called variables next to sequences, I if understand its not the same function as pre version variables how it works and what kinda things are used to?
To be honest. The new variable tab intimidates even me. Check out Timothy Luke's basic info on the GSE Github Wiki github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/Useful-Variables
I have no idea what is going on. I have the patron build. I tried using my 3.1 sequence and keybinding it but absolutely nothing. Nothing on any character.
Man Blizzard did gse real dirty... I hate them... I was on the edge giving up with gse... Still working on it to get it running properly... Is there any way shape or form to get it on the mouswheel, I'm struggle to get the binding on it, like I used it before? And big W thx for the video! 😊
I assigned the macro to "3" and then used my mouse controller and mirrored "3" to one of the mouse buttons, it does work similar as the click option. Hope this helps.
You gotta be diligent and check through your other addons to see if any of them are stealing the shift mod. I know ElvUI used to be a culprit for doing that.
ok already make it work, you need to create a regular macro in wow, and then call it with the gse addon, example. you create a mod:shift cleanse macro, and then named it "cleansemacro", you have to copy and paste that name in 1 action block of the gse, then it will work. its the only way i can do it, hope later we can do it easier
I don't use a gamepad, but I'm told that if you write a sequence that uses ZERO MacroText that it can be bound to the gamepad. Watch this video to see how to make such a sequence. ruclips.net/video/fhDAiyquHI0/видео.html
Really helpful….I never clicked my macros..only used keybinds but is it possible to put some kind of reminder on your action bar? For example if I use number 2 as my keybind I would like a visual reminder on my action bar on screen that shows the sequence.
dude i have watched all ur vids and these have helped me SO much with understanding the Stupid small indie company blizzard has became. im 60 years old with 3 fingers missing from the keyboard hand . from well 16 years of military . i cant play like others >thanks again and until they break whats not broken .
I've messed with creating shorts and I cant seem to get it to trim the video for any more than 15 seconds, which is TOO short. So sorry, I cant seem to figure shorts out. :(
I'm completely lost with this update. Please, tell me, once you have your "macro", if you go open world and see a monster, what key you push/click/spam, whay do you do to kill that monster using this addon. It was so simple before this update, so complicated now, this addon was the reason to not quit the game, if this addon is dead now I probably will leave wow forever. Thank you
The addon is FAR from dead. As a matter of fact, it seems to be running better than ever. Watch through my GSE tutorials. Your questions WILL be answered.
@@oakensoulI managed to import a macro, keybinded to a gamepad button and it worked fine, I spammed the button and the addon works. I used to have the icon for the macro in the action bar and used the key in my keyboard, if I keybind the key in keyboard it also works but the problem is the way I played was keybinding the central mouse button to the key number 1 and then turbo click the key 1 while central mouse button is holding pushed, that doesn't work anymore or I haven't figured how to get it back yet. Thank you for your answers and your videos
well this actually sucks. Ive used lazy macros for so long now that i cant play without them. Watching this vid im totally lost (not to do with you Oak) just im not technical enough" I just want to mousewheel my imported macros like before :(
Those sequences use MacroText, so they cannot be clicked. They have to be keybound. Check the Catchup on Github to see why. github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/GSE-3.2-and-The-War-Within-%E2%80%90-Catchup
Thanks OAK, I was super confused. A tip that has helped me a lot is binding my sequences to mousewheel up and down. I scroll down for builders and up for spenders. It's really hard to avoid overcapping on resources if you try to put it all in one sequence. Plus that way my left hand can be 90% devoted to WASD
Great tip! Whatever works best for you. Glad I could help
Thanks mate for explain it, still sad to see a very simple and usefull addon change to this complicated stuff, to much work for some of that just want a 3 spell rotation
Understood. I would direct you to my tutorial video for a very basic sequence that is clickable and may work with a controller. ruclips.net/video/fhDAiyquHI0/видео.html
Keep them coming OAK. Thanks so much for the info you are putting out.
More to come!
thank you so much i actually think gse is working alot better this way
Agreed, it seems to run a bit smoother now.
Oak you are the hero we needed! Thanks so much!
Why thank you!
I love your pally gse. Thanks a lot.
Glad you enjoy it!
I could barely understand how to write a macro before and now there’s all of these huge conditions. I guess I’m just gonna have to figure out playing the game without these macros that I got used to oh well.
The prior version of GSE was not easy to use, but we figured it out. The same will occur with this new version. You'll get it, I'm sure.
@@oakensoul i’m not angry with you, but my macro was working perfectly fine. I’ve been using it for almost 2 seasons now. Everything has been great. I’ve gotten used to it but now I’m can’t use it anymore. It’s broken. You’re telling me I have to go and keep buying this I try understanding using it and nothing seems self-explanatory anymore. And the starting instructions on their changes didn’t really help.
subbed, thanks for all your help, keep them coming.
Thanks for the sub!
Thanks Oak, its going to take me a bit to get used to making new macros with this new GSE. I believe I'll be moving from Pally and Sham this exp to Warrior so a whole new experience now :P
Good Luck Xero!
A very enlightening video, thank you very much
Glad you enjoyed it!
Super helpful! Tks very much!
You're welcome!
Awesome video! Thank You!
Glad you liked it!
what up man !!! love your macros . just subed
Yo, Thanks so much!
Subscribed! Seriously, your videos are like a lifeline for us train-wrecks who have been emotionally wrecked since the prepatch hit the servers! 😂 Thanks for creating these and for answering our desperate questions! Speaking of which, I have a question about modifiers-alt, ctrl, shift, ctrl+alt. Have these been moved to the macro sections now? If so, how often should we be adding those lines? I'm not a pro at sequences, but I vaguely remember a section in the old GSE, near the bottom by the trinkets, where I used to find these modifiers in the sequences. Unfortunately, I can't access that version anymore, which would have made things so much easier to show.
That's a hard question to answer. You really need to look at your sequence to determine where you want these modifiers. Like on my ret macro, I put my mod keys in the same block as my Holy Power spenders, so it will keep me from spending on things like divine storm, and instead cast a word of glory for instance.
@@oakensoul Fair point :)
I figure I'll need to go back to square one and add my talents on my hot bar as I used to. Then setup my hotkeys in sequence of use. Its been a long time since I did that but I do not see any way around this. I depended on others to help me out with simple gse setups now I won't be able to.
Things will iron themselves out. We'll be back to where we were soon enough. Just hang in there.
I think I remember from the previous version of GSE that you could 'Out of Combat' do some conditional branching. I thought I remembered that there was code you could use to detect buffs to make a TRUE or FALSE condition. Is this still possible? If so, how is it done / coded now?
Sounds like you're talking about variables. They are in there, read this. They are advanced and beyond my comprehension.. lol github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/Useful-Variables
Thank you! They really messed this addon up bad. very sad
Tell me about it
is there a way to bind the 1/2/3 keys to a sequence, and also have them function for dragon riding/vehicle powers for quests?
Sort of, yes github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/KeyBinding#sky-riding-when-using-keybinds
Hmm, lots of bad news here for those of us who got used to having simple sequences bound to the easiest-to-press action bar buttons. I didn't even have too many, just one for my paladin (to cast Hammer of Wrath automatically when available, that was all), but it sounds like I'm going to have to give it up. Sad.
Watch some of my other videos. It's not the end of the world. GSE is still very much alive and kicking and working quite well. You just have to approach it a little differently, such as the keybinding.
Thank for putting all this together. However I have a question. I am using your Guardian Druid gse and it just feels like I am sitting there not doing any actions while I wait for gse to cycle. Is this how its gonna be from on? My dps is significantly less.
I dont know why that would be. It seems to work well for me and others. Maybe toy with how fast you're key spamming.
Can some one explain please, I have seq: 2 actions: 1. Cast spell 2. run macro. Sequence shouold automatically run both commands? I keybind seq but its realise action by block (1 preass - 1 block, 2nd press - second block). Its correctly?
Yes, it moves through the sequence by 1 block per keypress.
Hi Oak, do you know how to add [nochanneling] in the new GSE macro?
I could only add my spell under "Spell" when I create my action, and whatever I add in "Macro", it is not working.
[nochanneling] is a macro conditional. It will only work in macrotext blocks. Any sequence with macrotext blocks have to be used through a keybind which you do in the GSE main menu. You cannot /click any sequences that use macrotext. However, if you make a sequence that uses ZERO macrotext, you can create a macro through WoW's /macro interface that says /click [nochanneling] YOURSEQUENCENAME and that should be clickable. It can be hit or miss though. Watch this video ruclips.net/video/fhDAiyquHI0/видео.html for how to make that type of sequence.
Hi, Mr. Oak I see a tab called variables next to sequences, I if understand its not the same function as pre version variables how it works and what kinda things are used to?
To be honest. The new variable tab intimidates even me. Check out Timothy Luke's basic info on the GSE Github Wiki github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/Useful-Variables
GSE Sequence icons are not showing.
hate blizzard even more now.. thank you for update )
Thank you for your comment
i agree - leave the addons alone Blizz - they make the game better!
I have no idea what is going on. I have the patron build. I tried using my 3.1 sequence and keybinding it but absolutely nothing. Nothing on any character.
Some sequences from 3.1 won't work due to the changes.
Subscribed..nice job.i am having an issue. I imported a sequence its in there but the button I am binding it doesn't work.
Make sure you don't have any conflicts. You can also ask in the GSE United Discord for help. :)
discord.gg/u9Gb6bXzay
sorry, this is the macro im trying with shift modifier but doesnt work idk why /castsequence [mod:shift] reset=90 Avatar, Thunderous Roar
Resets do not work in GSE. Another thing that Blizzard doesn't allow. :( Remove the reset=90 and the castsequence will do it's thing again
Is there a tutorial as all i had to was import a profile now it seems unusable?
I'm not sure I understand your question. Try this tutorial ruclips.net/video/My2Bmyhs20g/видео.html
nothing works for me cant make a macro icon
Icons are no longer used - Read about it here. github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/GSE-3.2-and-The-War-Within-%E2%80%90-Catchup
I have the addon but no idea how to make even the simplest thing
I am about to post a video tutorial on how to make a basic sequence.
hey could u please make a video on how to make mods ahift, ctrl and alt on the new gse
I'll add that to the list. :)
my skill are not showing in the log when i use them why ?
No clue. the combat log? SOunds like a wow problem. Sorry :(
Man Blizzard did gse real dirty... I hate them... I was on the edge giving up with gse... Still working on it to get it running properly... Is there any way shape or form to get it on the mouswheel, I'm struggle to get the binding on it, like I used it before? And big W thx for the video! 😊
You should be able to bind it with the GSE binding menu... I just tried in game and it DID work. ¯\_(ツ)_/¯
I assigned the macro to "3" and then used my mouse controller and mirrored "3" to one of the mouse buttons, it does work similar as the click option. Hope this helps.
Can you explain how? Thank you@@joseluisberrios9749
excuse me, when i put a shift conditional i cant use the gse macros, i can use it whit no mod, but no with shift
You gotta be diligent and check through your other addons to see if any of them are stealing the shift mod. I know ElvUI used to be a culprit for doing that.
@@oakensoul dont use elvui, and the macro works in the normal macros, just dont work when i put him in the gse with the other macros
ok already make it work, you need to create a regular macro in wow, and then call it with the gse addon, example. you create a mod:shift cleanse macro, and then named it "cleansemacro", you have to copy and paste that name in 1 action block of the gse, then it will work. its the only way i can do it, hope later we can do it easier
is there any way to bind your sequences to gamepad keys?
I don't use a gamepad, but I'm told that if you write a sequence that uses ZERO MacroText that it can be bound to the gamepad. Watch this video to see how to make such a sequence. ruclips.net/video/fhDAiyquHI0/видео.html
@@oakensoul Many Thanks!
Great stuff - I can't seem to get the program to produce a icon - I'm sure it is user error - help LOL
You should watch this ruclips.net/video/t5wQavbZoYE/видео.html
Icons do not work the way they did before.
I don't understand how I use it?
Try this tutorial ruclips.net/video/My2Bmyhs20g/видео.html
@@oakensoul Thanks it was not that much different from before, I did think it was more complex. do you have any more class builds Thanks again
Really helpful….I never clicked my macros..only used keybinds but is it possible to put some kind of reminder on your action bar? For example if I use number 2 as my keybind I would like a visual reminder on my action bar on screen that shows the sequence.
Check out this video. ruclips.net/video/t5wQavbZoYE/видео.html
ok for sum of us that are can you re do one step by step im not tech savvy ,
A step by step for which part? I did make a sequence tutorial which you can find here: ruclips.net/video/fhDAiyquHI0/видео.html
dude i have watched all ur vids and these have helped me SO much with understanding the Stupid small indie company blizzard has became. im 60 years old with 3 fingers missing from the keyboard hand . from well 16 years of military . i cant play like others >thanks again and until they break whats not broken .
Let's hope that they are done with addon changes. 😁
any luck getting reset=target to work again? seems broke
reset=target doesnt work due to a WOW bug. The workaround is to call an in game macro that uses target=reset
Nothing for me i try evrything..
Watch the GSE playlist here and read through the Discord. I'm sure you'll get it.
@@oakensoul Bro can you make simple video from start? Just elementary 2 spells step by step?
short version pls
I've messed with creating shorts and I cant seem to get it to trim the video for any more than 15 seconds, which is TOO short. So sorry, I cant seem to figure shorts out. :(
@@oakensoul tks , rezolved .. i know what i have to do :) ty again
I'm completely lost with this update. Please, tell me, once you have your "macro", if you go open world and see a monster, what key you push/click/spam, whay do you do to kill that monster using this addon. It was so simple before this update, so complicated now, this addon was the reason to not quit the game, if this addon is dead now I probably will leave wow forever. Thank you
The addon is FAR from dead. As a matter of fact, it seems to be running better than ever. Watch through my GSE tutorials. Your questions WILL be answered.
@@oakensoulI managed to import a macro, keybinded to a gamepad button and it worked fine, I spammed the button and the addon works. I used to have the icon for the macro in the action bar and used the key in my keyboard, if I keybind the key in keyboard it also works but the problem is the way I played was keybinding the central mouse button to the key number 1 and then turbo click the key 1 while central mouse button is holding pushed, that doesn't work anymore or I haven't figured how to get it back yet. Thank you for your answers and your videos
well this actually sucks. Ive used lazy macros for so long now that i cant play without them. Watching this vid im totally lost (not to do with you Oak) just im not technical enough" I just want to mousewheel my imported macros like before :(
EDIT: watching your other vids i managed to get it working. Thankyou for what you do! ;)
You'll get it....
See... You got it!
Having trouble getting oakretst and oakretae to work with click macro
Those sequences use MacroText, so they cannot be clicked. They have to be keybound. Check the Catchup on Github to see why.
github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/GSE-3.2-and-The-War-Within-%E2%80%90-Catchup
Thank you