I'm an 85 year old great great granny that has been playing with computers since the 80's when the first IBM clones came out. Love my computers. Been playing WoW for the last 15 years, and have been using GSE for a number of years. Lost with the new changes. This video is a big help.
THANK YOU SO VERY MUCH....... the new version of GSE was driving me nuts but your video explained it to me in a way that I could actually understand it........ good god the official GSE site should have your video for a setup guide it's that easy........
I really appreciate your contribution. My hands are all mangled up due to age related problems. I panicked when all of my GSE macros disappeared this morning after opening WOW for the first time after reset. I'm sure that this will be a lot of fun to figure all of this out. (I'm a retired computer geek)
Was directed here from the discord. I explained my problem because of my disability and was told to watch your videos. I am so excited to try this when the servers are back up. I was getting extremely depressed thinking I wouldn't be able to play anymore. Thank you so much!!!!! Instantly subbed and liked. I seriously can't tell you how much I appreciate this!
Love the video. Short, but detailed. I ran into this issue yesterday when I tried to use the new GSE for the 1st time. Importing was fairly straight forward, but the format on the new discord was a bit confusing. I went to TWW BM Hunter and took me a bit to figure out exactly what to copy. In time I am sure it'll get easier. These transitions are always a challenge for me.
Yeah, the GSE United Discord is definitely different. As far as the new GSE, you can do just about everything you could in GSE 3.1, you just have to look at your sequences differently.
Thank you Oak for what you do. Enjoy the coffees! Now I just need em for the rest of the classes to work. Going to try your purge advice from the other video.
Thank you very much for the explanation. I encourage you to make more videos, and if possible, a video explaining how to make sequences would be wonderful.
I helped a person below and thought I would add it here, also. If you are used to the old way. Say, like putting GSE on button 1 on your taskbar. I would recommend? Try key binding the button next to your 1 button. I use that. Then, I move all my other spells to my taskbar. (Procs, CDs, etc.) I've been doing it that way. And it works for me. LOL
Thank you SO MUCH for this video. I would have never figured this shit out. I have used GSE for years. Even back to the old advanced macro days. (You know, the long freakin ones - lol) I hope this update even gets my DPS better. I always had issues with the last update. (I don't use the mouse toggle delays.) Thanks again man
A good series of videos and worth linking, on wowlazymacros. It's quite the system, this new version of GSE, but it might be better. I took apart one of the first "11.0" sequences I found, for the BM hunter, It looked quite similar to what I remember. It was all just laid out a bit strangely. Blocks were physically repeated, instead of using a loop command. A seperate macro was used as an opener, despite that I could integrate all of it into the base GSE setup. I do think that taking apart a sequence would help a lot of people and your videos are the first steps towards that or anything like it. I always import a sequence, open it and then save it as something else, so that I maintain the clean original to refer back to. That seems to work (for me). Thanks for the introduction to the new version of GSE. 😎
Yeah when I was first learning to write sequences I would open up some of the ones that were posted online to see how they worked and that did help quite a bit.
I almost had to walk away from the game a few times because it wasn't accessible. Oak's macros gave me a way to play with my friends again, I can't recommend trying them enough.
Thank you so much for doing these videos :-) I have been using GSE since I found out it existed, and it really helps me playing the game and not only by looking at my actionbars. But Im used to use G-HUB to make the macro's running, what do you do after you have bound your macros to the brackets ?....do you manually click the bracket keys or...? Sorry for not being an expert in this either 🙂
@@oakensoul Thank you very much for your reply. I missed something after the keybind in GSE, because Im used to having the button on the bar, which needs to be bound through mouse software, and I missed that step from your video. AFter that I got help from another player who helped me with the last bit :-)
It's the key above the enter key and to the right of the letter "P" on your keyboard. I don't actually reach all the way over there to hit that key, I rebind my G Keys to the brackets on my Corsair Keyboard.
Yes, you can put the icon scroll macro in your actionbar, however, it will NOT work for clicking your sequence. It will ONLY be a visual display to show where the sequence is at.
New subscriber and I have a question as I do use your GSE macros with the new way of doing things do we just hit the bind key one time and it runs the whole macro or do we have to hit that key multiple times to complete running the macro so if there were five sequences in your macro do we hit the key bind five times or do we just hit it once and it runs its entire course ?
Watch my other videos. In this one, yes, the streamer plugin is up, but the other icon scroll is a weakaura which I talk about in this video. ruclips.net/video/t5wQavbZoYE/видео.html
Can you do a video about how to edit/modify an existing posted macro? I've been using the original GnomeSequencer up until this point (not GSE) successfully and could create/mod my own .luas, but that's broken now with the changes Blizz has made.
so, i can't figure out why our gse's look different. mine is updated, 3.2 but, it's a full screen, well, in screen full, and there is no keybinding button.
GSE no longer makes icons as you can no longer click if there are any macrotext blocks in your sequence. Check out the wiki github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/GSE-3.2-and-The-War-Within-%E2%80%90-Catchup
I got one problem left i can't find an answer to... When i keybind my Tank Macro in Prot Spec, the Keybind is still used in Fury, is there a way to make keybinds spec dependent? NVM when you are in the spec you dont overwrite the other spec binds, but you can use them if you didnt bind another in the spec, which was kinda weird to me
That is strange, but makes sense. Maybe ask Tim about it here discord.gg/ng4YhdvBVS Or post a bug report on the GSE Github github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/issues
Thanks for this video huge help understanding the new GSE update. I was messing around with this a bit is there anyway to get this new way to work with the console port add on? I did the brackets like in the video but there doesn't seem to be anyway to map them or the string to the controller hotbar
Hi, Oak, thanks for the video. Is there a way for the GSE keybind to not remove the wow keybind? I want to be able to use dragon riding abilities say if i keybind to 2 and not have that removed.
Icons are not created by GSE any longer as you can no longer click if there are any MacroText blocks. Check out the wiki github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/GSE-3.2-and-The-War-Within-%E2%80%90-Catchup
Hmm... if there are issues keybinding you can try clearing your keybinds using the /run GSE_C.KeyBindings = {} command. I know others have had success by doing this.
I believe the GSE developer has limited this to his Patreons. And even then, many older sequences WILL NOT WORK in the new GSE 3.2 due to Blizzard changes.
I found your vids a hour ago, sitting here and staring at the new gse and I have no clue how to even setup anything...nothing works... And are they forcing me/us now to use keybinds? Pls someone explain to me how to even setup anything now in the new gse😢😢😢 and I'm not new to gse, still can't figure it out so that it works....
Thank you for you're answering, but still doest help at all, nothing works, delete the Lua, wiped old storage, nothing worked, can't create anything, and even then I have no clue where the macro etc even is or how it work, even the saving function doesn't work, "save pending for..." that's it can't even save the macro or delete it nor it's running anything... 😩
Read the github wiki but still I don't get it, I don't even have a macro icon, I can not figure it out how to setup anything, and when English is not your first language it's even harder... 3 times now trough the wiki and still to stupid to understand or setup gse... I give up😢
Didn't Blizzard break some of GSE stuff? I am just coming back to play pre-patch and my macros don't seem to work at all, also missing my talents as well. Should I wipe all of my previous macros and start over? I am trying to find more in-depth info on the new GSE for 11.0
Check out my other videos, the troubleshooting one will touch on this... But essentially, YES, wipe everything and start anew. It'll be the cleanest way to do it.
Hey in the Last Version the addon created a Button that i could place in my Action bar. This was usefull for me cause i use my spekks with my mouthe and Not by pressing the Keyboard. Ist there a was to implement this Feature Back? I would Like to move the macro into my Action bar and click IT with my Mouse. Thanks in advance
Unfortunately, blizzard's changes to addons makes this no longer work and to use macrotext in a sequence you are now required to keybind. I'm sorry. It is possible to make very basic sequences that you can click, but those sequences are pretty limited and most creators are going to use macrotext and therefor you cannot click. :(
If you are used to the old way. Say like putting GSE on button 1 on your task bar. I would recommend? Try key binding the button next to your 1 button. I use that, Then I just moved all my other spells to my taskbar. (Procs, CDs, etc.)
Hi OAK I imported the sequence as you described and made the keybind but the macro doesn't become active when I click the button. Can you please help me?
@@oakensoul i Spam the key but only 1or 2 techniques are activate never the entire saved sequence i have the current Havoc sequence from Lacy Marcos and it doesn't Work If i Spam the Key my dh never use Blade Dance or other techniques only 3 techniques used by spamming de keybind
Thanks so much. My wife loves wow but has eyesight issues and i am hoping to use these to make her characters playable again. I do have one question. With gse and the keybinds... we dont need to use a traditional macro icon and place it on the hotkey bar anymore...just setup a keybind and use that instead....is that right? Thanks again for the info.
So im confused on the MS tbh. I use the logitech software, when I record a macro/hotkey theres two ways to set it it seems, "standard delay" and you get the MS or uncheck standard delay and set two different MS... one between the key press and release and the other one. What should it be?
Hello. My native language is not English, so I am not fluent in English. Is there no way to use it by putting it in the skill window like before? In the case of Druids, Guardian Druids use GSE with mouse heel, but in the case of Healers, they do not use GSE, so they cannot use mouse heel. Is there no way to create a macro button and do it like before without setting it as a keybinding?
I think I understand. This may be possible, but the sequence would have to be written differently. Check out this video. ruclips.net/video/fhDAiyquHI0/видео.html
@@oakensoul sorry maybe im missing something, i understand the keybind part, but does it no longer generate a button i can put on my bars? if it does im not seeing it lol
I think there are limitations with the controller mod addon that make it so it doesnt work with GSE. Unless that addon developer changes how it works, the two will likely not get along. Sorry. :(
@@oakensoul keybind in the gse menu? oh my goodness...I thought that was to pull the macro name there was only one empty box. Where is the keybind option there? Do I have to go to the actual keybound option in the bliz menu?
Hard to say. I'd suggest watching the TWW Troubleshooting vid here: ruclips.net/video/qkEHDCjp1P0/видео.html And if that doesnt help, then find Help here: GSE Timothy Luke Discord: discord.gg/D7CYYsSCCN GSE United Discord: discord.gg/2gUDBTnpC7 WowLazyMacros: wowlazymacros.com/
Talent strings change with every WoW patch. I use the recommended wowhead builds, so you can grab the preferred builds from wowhead or icyveins and they will work.
Hitting "NEW" for keybinds is doing nothing, not getting that 'key to bind' option... what gives? :S Edit -- did a total reinstall deleting all variables and files associated with GSE, sorted. Thanks :)
You may need to delete the GSE.lua file outside the game (c:\path\to\wow\_retail_\WTF\Account\YourAccountName\SavedVariables\GSE.lua) Also, you may need to wipe your old GSE storage via /run GSESequences = nil /run GSE3Storage = nil
After deleting GSE and its Settings via curseforge and then reinstalling GSE, I was finally able to start importing. Was very frustrating till then, lol.
Hmm... I dont really understand your question? Um, I'd suggest popping into either the GSE United discord or Tim's Official GSE discord. GSE Official - For issues with GSE - discord.com/invite/yUS9R4ZXZA GSE United - For Sequences and help creating in GSE - discord.gg/FHDfMCmeNK
It's done with keybinding now. There is nothing to pop up on your screen anymore. Wow removed the ability to /click a macro with a macro, so the developer had to find another way, and that way is keybinding.
This is TWW beta, right? GSE doesn't seem to work in live prepatch environment at the moment. Then again, many things are broken right now. Maybe I just can't get it to work due to the changes. A little guide on how to actually write a simple sequence and put it on the action bars would be awesome. I've been tinkering for 30 mins already, all in vain.
Check out my videos. The most recent two are on live and one will show you how to make a basic sequence, the other will help you with troubleshooting to get it to work on live. ruclips.net/p/PLOnI02AB2I0NgL2-Wzkn9RO1mdpvcf84f
@@oakensoul Thanks, I will check it out. Right now, there are so many LUA errors that I can't even open my inventory (!) unless I disable all add-ons and run a clean game. Hopefully things will get better soon. But GSE tutorials are sorely needed, especially now that GSE has changed.
Definitely! However, you may need to adjust the spells based on what's available at different levels. Such as Consecration, it's not in my sequence as Blade of Justice drops it, however it wont do that until you've leveled enough to get that talent.
Doesn't work i have spent over 5 day i reloaded wow 3 time i removed all macos. i posted here begging for help went to live chat in gse, and i get talked down on , I'm disabled the old way was easier this way isn't the same Gěs you're on I'm 3.2.05 everything you show isn't not what my Gse is and i have the up to date, i cant even kb to 1 key nothing
The interface has changed a bit since this video was put out. But it's ultimately the same process. I'll try and make an updated import sequence video soon.
You may need to delete the GSE.lua file outside the game (c:\path\to\wow\_retail_\WTF\Account\YourAccountName\SavedVariables\GSE.lua) Also, you may need to wipe your old GSE storage via /run GSESequences = nil /run GSE3Storage = nil
You may need to delete the GSE.lua file outside the game (c:\path\to\wow\_retail_\WTF\Account\YourAccountName\SavedVariables\GSE.lua) Also, you may need to wipe your old GSE storage via /run GSESequences = nil /run GSE3Storage = nil
Not cheats... A lot of people do not have the ability to play the game the way you do. This helps. It's an accessibility issue. This addon in no way guarantees a perfect rotation, it essentially just hits buttons and hopes to hit the right thing at the right time.
I'm an 85 year old great great granny that has been playing with computers since the 80's when the first IBM clones came out. Love my computers. Been playing WoW for the last 15 years, and have been using GSE for a number of years. Lost with the new changes. This video is a big help.
Glad I could help.
Thanks. I was stuck til I found this video. I'm old. Sometimes I need walked through things one step at a time
Glad I could help!
THANK YOU SO VERY MUCH....... the new version of GSE was driving me nuts but your video explained it to me in a way that I could actually understand it........ good god the official GSE site should have your video for a setup guide it's that easy........
Glad it helped!
I really appreciate your contribution. My hands are all mangled up due to age related problems. I panicked when all of my GSE macros disappeared this morning after opening WOW for the first time after reset. I'm sure that this will be a lot of fun to figure all of this out. (I'm a retired computer geek)
Glad to help!
Thank you for this video, I feel like a massive weight has been lifted off my shoulders. Look forward to all your future videos.
You're so welcome!
Was directed here from the discord. I explained my problem because of my disability and was told to watch your videos. I am so excited to try this when the servers are back up. I was getting extremely depressed thinking I wouldn't be able to play anymore. Thank you so much!!!!! Instantly subbed and liked. I seriously can't tell you how much I appreciate this!
I'm glad this helped. :)
Love the video. Short, but detailed. I ran into this issue yesterday when I tried to use the new GSE for the 1st time. Importing was fairly straight forward, but the format on the new discord was a bit confusing. I went to TWW BM Hunter and took me a bit to figure out exactly what to copy. In time I am sure it'll get easier. These transitions are always a challenge for me.
Yeah, the GSE United Discord is definitely different. As far as the new GSE, you can do just about everything you could in GSE 3.1, you just have to look at your sequences differently.
Thank you Oak for what you do. Enjoy the coffees! Now I just need em for the rest of the classes to work. Going to try your purge advice from the other video.
Thank you for your generosity. So much appreciated! :)
Thank you for making a video so quick after pre-patch release :)
No problem!
Thank you very much for the explanation. I encourage you to make more videos, and if possible, a video explaining how to make sequences would be wonderful.
I plan on it.
I helped a person below and thought I would add it here, also. If you are used to the old way. Say, like putting GSE on button 1 on your taskbar. I would recommend? Try key binding the button next to your 1 button. I use that. Then, I move all my other spells to my taskbar. (Procs, CDs, etc.) I've been doing it that way. And it works for me. LOL
Awesome tip. Whatever works!
The returns for us mini🐐, thanks!!!
Thank You!
Thanks oak was looking for a simple guide on how to set up everything keep it up
Glad I could help
Thanks for the video and the hard work on the addon update! Keep up the good work!
Thanks for the comment. I hope the video helps you out.
Thanks a ton for your awesome explanations!
My pleasure!
Excellent work! Thank you so much!
No worries
Thank you SO MUCH for this video. I would have never figured this shit out. I have used GSE for years. Even back to the old advanced macro days. (You know, the long freakin ones - lol) I hope this update even gets my DPS better. I always had issues with the last update. (I don't use the mouse toggle delays.) Thanks again man
No Worries.. Even with the changes, this is leaps and bounds above where the original Gnome Sequencer was back in Mists and WoD.
omg you made it look so easy i was lost as hell and love your work
🤩
You can do it!
A good series of videos and worth linking, on wowlazymacros. It's quite the system, this new version of GSE, but it might be better. I took apart one of the first "11.0" sequences I found, for the BM hunter, It looked quite similar to what I remember. It was all just laid out a bit strangely. Blocks were physically repeated, instead of using a loop command. A seperate macro was used as an opener, despite that I could integrate all of it into the base GSE setup.
I do think that taking apart a sequence would help a lot of people and your videos are the first steps towards that or anything like it. I always import a sequence, open it and then save it as something else, so that I maintain the clean original to refer back to. That seems to work (for me). Thanks for the introduction to the new version of GSE. 😎
Yeah when I was first learning to write sequences I would open up some of the ones that were posted online to see how they worked and that did help quite a bit.
Many thanks for this video!
Glad it was helpful!
thank you and thanks for the hard work
My pleasure!
I am an older GenX player... THANK YOU!! I can play my hunter again, LOL
Awesome. I just posted a pretty good BM hunter sequence ruclips.net/video/SZm8oDr47VM/видео.html
thank you Oak
No worries. Thank you for the comment
Great job!
Thanks!
I almost had to walk away from the game a few times because it wasn't accessible. Oak's macros gave me a way to play with my friends again, I can't recommend trying them enough.
THANKS!
Thank you
You're welcome.... Thank YOU!
Love the vid was a big help!
Is there a way to visually see of the macro is still firing, apart from the spells being activated on the bars?
Yes, Check out this video ruclips.net/video/t5wQavbZoYE/видео.html
Also, this weakaura wago.io/stqLDfNWeL
Thank you so much for doing these videos :-) I have been using GSE since I found out it existed, and it really helps me playing the game and not only by looking at my actionbars. But Im used to use G-HUB to make the macro's running, what do you do after you have bound your macros to the brackets ?....do you manually click the bracket keys or...? Sorry for not being an expert in this either 🙂
There are many ways to do it. You can manually click the keys as well as other options. Check on wowlazymacros.com for suggestions.
@@oakensoul Thank you very much for your reply. I missed something after the keybind in GSE, because Im used to having the button on the bar, which needs to be bound through mouse software, and I missed that step from your video. AFter that I got help from another player who helped me with the last bit :-)
hi
fantastic video
how do u write square bracket?
thx a lot
It's the key above the enter key and to the right of the letter "P" on your keyboard. I don't actually reach all the way over there to hit that key, I rebind my G Keys to the brackets on my Corsair Keyboard.
Thank you very much oak you make it super easy... But can we but the macro in action bar?
Yes, you can put the icon scroll macro in your actionbar, however, it will NOT work for clicking your sequence. It will ONLY be a visual display to show where the sequence is at.
legend ty my pally thanks you aswell lol
Thank you for the comment
New subscriber and I have a question as I do use your GSE macros with the new way of doing things do we just hit the bind key one time and it runs the whole macro or do we have to hit that key multiple times to complete running the macro so if there were five sequences in your macro do we hit the key bind five times or do we just hit it once and it runs its entire course ?
you still have to spam the key over and over. I talk about it in this video ruclips.net/video/ChODE3vFmTk/видео.html
oak, are you using the streamer plugin on ddetails
to show the abilities being used?
Watch my other videos. In this one, yes, the streamer plugin is up, but the other icon scroll is a weakaura which I talk about in this video. ruclips.net/video/t5wQavbZoYE/видео.html
Can you do a video about how to edit/modify an existing posted macro? I've been using the original GnomeSequencer up until this point (not GSE) successfully and could create/mod my own .luas, but that's broken now with the changes Blizz has made.
I can try, sure..
Thanks! Do I understand correctly that if a sequence contains 10 skills, then sometimes it could take 10 key presses to fire a skill?
That is correct. Sometimes even more.
so, i can't figure out why our gse's look different. mine is updated, 3.2 but, it's a full screen, well, in screen full, and there is no keybinding button.
Hard to say without being able to see what yours looks like. Maybe put a screenshot on the GSE United discord? discord.gg/gseunited
How do you create an icon to put on your bar? So I can click the micro.
GSE no longer makes icons as you can no longer click if there are any macrotext blocks in your sequence.
Check out the wiki github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/GSE-3.2-and-The-War-Within-%E2%80%90-Catchup
@@oakensoul yeah it sucks
I got one problem left i can't find an answer to... When i keybind my Tank Macro in Prot Spec, the Keybind is still used in Fury, is there a way to make keybinds spec dependent?
NVM when you are in the spec you dont overwrite the other spec binds, but you can use them if you didnt bind another in the spec, which was kinda weird to me
That is strange, but makes sense. Maybe ask Tim about it here discord.gg/ng4YhdvBVS Or post a bug report on the GSE Github github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/issues
Thanks for this video huge help understanding the new GSE update. I was messing around with this a bit is there anyway to get this new way to work with the console port add on? I did the brackets like in the video but there doesn't seem to be anyway to map them or the string to the controller hotbar
Unfortunately I have no idea as I have never used the consoleport addon. Maybe check with that developer?
Thanks !
What class would you say is the easiest to "GSE" and which one is the hardest?
I think Ret Pally is pretty easy. BM Hunter has been historically easy.
@@oakensoul Thanks!!
Hi, Oak, thanks for the video. Is there a way for the GSE keybind to not remove the wow keybind? I want to be able to use dragon riding abilities say if i keybind to 2 and not have that removed.
You can only bind 1 thing in WoW so you can either bind the actionbar button or the GSE button but not both. :(
I imported by saved DH macros and they don't work... however your Ret macros work like a charm. Please advise...
Some sequences may not work unless they've been updated for all the changes.
i cant seem to be find out how to open the section where the keybindings are, it doesnt show in the video as far as i can tell.
duh right click on the macro fro mthe list, jsut found it, and thansk so much for your vids and macros
Whey you type /gse it brings usp the GSE: Main Menu - It's the third option from the left.
That is one option. :)
Hey i have a question.Where i can find macro icons???? I DONT FIND IT IN PRE PATCH 3.2
Icons are not created by GSE any longer as you can no longer click if there are any MacroText blocks.
Check out the wiki github.com/TimothyLuke/GSE-Advanced-Macro-Compiler/wiki/GSE-3.2-and-The-War-Within-%E2%80%90-Catchup
Hi , so for “Hold CTRL for Word of Glory” still work for this new version ? Or I have to manually use it now ?
Yes, word of glory and intercession are still baked in by holding CTRL while mousing over a player.
i have problem i imported string
it imported than i go keybinds but it dont appear to bind sequence
Hmm... if there are issues keybinding you can try clearing your keybinds using the /run GSE_C.KeyBindings = {} command. I know others have had success by doing this.
how do I import my older sequences into the new editor?
I believe the GSE developer has limited this to his Patreons. And even then, many older sequences WILL NOT WORK in the new GSE 3.2 due to Blizzard changes.
I found your vids a hour ago, sitting here and staring at the new gse and I have no clue how to even setup anything...nothing works... And are they forcing me/us now to use keybinds? Pls someone explain to me how to even setup anything now in the new gse😢😢😢 and I'm not new to gse, still can't figure it out so that it works....
Watch my other videos. It's very different than how it was, but you can do this.
Thank you for you're answering, but still doest help at all, nothing works, delete the Lua, wiped old storage, nothing worked, can't create anything, and even then I have no clue where the macro etc even is or how it work, even the saving function doesn't work, "save pending for..." that's it can't even save the macro or delete it nor it's running anything... 😩
Read the github wiki but still I don't get it, I don't even have a macro icon, I can not figure it out how to setup anything, and when English is not your first language it's even harder... 3 times now trough the wiki and still to stupid to understand or setup gse... I give up😢
Didn't Blizzard break some of GSE stuff? I am just coming back to play pre-patch and my macros don't seem to work at all, also missing my talents as well. Should I wipe all of my previous macros and start over? I am trying to find more in-depth info on the new GSE for 11.0
Check out my other videos, the troubleshooting one will touch on this... But essentially, YES, wipe everything and start anew. It'll be the cleanest way to do it.
@@oakensoul I saw them, thanks for making them. I now have to wait for new rotations to use, but that is okay I got a couple of them working.
Hey in the Last Version the addon created a Button that i could place in my Action bar. This was usefull for me cause i use my spekks with my mouthe and Not by pressing the Keyboard. Ist there a was to implement this Feature Back? I would Like to move the macro into my Action bar and click IT with my Mouse. Thanks in advance
Unfortunately, blizzard's changes to addons makes this no longer work and to use macrotext in a sequence you are now required to keybind. I'm sorry.
It is possible to make very basic sequences that you can click, but those sequences are pretty limited and most creators are going to use macrotext and therefor you cannot click. :(
If you are used to the old way. Say like putting GSE on button 1 on your task bar. I would recommend? Try key binding the button next to your 1 button. I use that, Then I just moved all my other spells to my taskbar. (Procs, CDs, etc.)
Hi OAK I imported the sequence as you described and made the keybind but the macro doesn't become active when I click the button. Can you please help me?
You have to spam the key. Here's a video where I talk about it. ruclips.net/video/ChODE3vFmTk/видео.html
@@oakensoul i Spam the key but only 1or 2 techniques are activate never the entire saved sequence i have the current Havoc sequence from Lacy Marcos and it doesn't Work If i Spam the Key my dh never use Blade Dance or other techniques only 3 techniques used by spamming de keybind
Hard to say why not. Try different sequences from wowlazymacros or the GSE United discord.
Thanks so much. My wife loves wow but has eyesight issues and i am hoping to use these to make her characters playable again.
I do have one question. With gse and the keybinds... we dont need to use a traditional macro icon and place it on the hotkey bar anymore...just setup a keybind and use that instead....is that right?
Thanks again for the info.
Yes, that's right
@@oakensoul legend, thanks so much, i will try this out this weekend and hopefully my wife can be back playing the game she loves. Thanks again.
Are you modifiers still working in this version of gse? [Mod:shift] for example? I don't have access to beta other wise I'd be testing myself.
Mod keys do still work, yes. You have to make sure you have cleared any potential keybinding conflicts though.
So im confused on the MS tbh. I use the logitech software, when I record a macro/hotkey theres two ways to set it it seems, "standard delay" and you get the MS or uncheck standard delay and set two different MS... one between the key press and release and the other one. What should it be?
Cannot get into the discords. Says my email is already being used when trying to verify my email.
Sorry bub, not sure what that issue would be. I'd suggest reaching out to Discord support.
Hello.
My native language is not English, so I am not fluent in English.
Is there no way to use it by putting it in the skill window like before?
In the case of Druids, Guardian Druids use GSE with mouse heel, but in the case of Healers, they do not use GSE, so they cannot use mouse heel.
Is there no way to create a macro button and do it like before without setting it as a keybinding?
I think I understand. This may be possible, but the sequence would have to be written differently. Check out this video. ruclips.net/video/fhDAiyquHI0/видео.html
@@oakensoul Thanks for the reply. I'll try it~
how to update the GSE you already have to the new update?
The new GSE 3.2 is available on Curseforge and Wowuphub
so i am pretty new to this stuff lol, how can i make it an icon i can also see on my bars lol
See this video ruclips.net/video/L-EBQlavkIo/видео.html
@@oakensoul sorry maybe im missing something, i understand the keybind part, but does it no longer generate a button i can put on my bars? if it does im not seeing it lol
I dont understand how to have a macro now if I just keybind it. I play on controller how do I get them to work on controller now?
I think there are limitations with the controller mod addon that make it so it doesnt work with GSE. Unless that addon developer changes how it works, the two will likely not get along. Sorry. :(
So this will work, but not with dragonflight? Thanks for the content!
Since the War Within prepatch has started, this will work NOW. :)
Aha...so when you click on the specific macro you need to actually press the key you want bound to it?
You need to press the key that you bound in the keybinding menu of GSE
@@oakensoul keybind in the gse menu? oh my goodness...I thought that was to pull the macro name there was only one empty box. Where is the keybind option there? Do I have to go to the actual keybound option in the bliz menu?
Hiii , I import the macro and set the keybind but the button not doing nothing , what’s more I need ? I try in the pre patch right now
Hard to say. I'd suggest watching the TWW Troubleshooting vid here: ruclips.net/video/qkEHDCjp1P0/видео.html
And if that doesnt help, then find Help here:
GSE Timothy Luke Discord: discord.gg/D7CYYsSCCN
GSE United Discord: discord.gg/2gUDBTnpC7
WowLazyMacros: wowlazymacros.com/
@@oakensoul thanks n.n
😮thanks for this but was wondering if there is a sequence for ele shaman?
I have not made one
What ms speed you use your macros?
MS is highly subjective to your set up and latency. If using software, play with the different speeds till you find something that works for you.
Tried importing the talents says out of date
Talent strings change with every WoW patch. I use the recommended wowhead builds, so you can grab the preferred builds from wowhead or icyveins and they will work.
Hitting "NEW" for keybinds is doing nothing, not getting that 'key to bind' option... what gives? :S
Edit -- did a total reinstall deleting all variables and files associated with GSE, sorted. Thanks :)
Glad you got it! WTG!
GSE does nothing when i import
You may need to delete the GSE.lua file outside the game (c:\path\to\wow\_retail_\WTF\Account\YourAccountName\SavedVariables\GSE.lua)
Also, you may need to wipe your old GSE storage via
/run GSESequences = nil
/run GSE3Storage = nil
After deleting GSE and its Settings via curseforge and then reinstalling GSE, I was finally able to start importing. Was very frustrating till then, lol.
hi gse master haha can u explain me why i cant keybind on 123 over QWER tabs its working only on 123 in jumb tab grrrr plsssss help ty so much
Hmm... I dont really understand your question? Um, I'd suggest popping into either the GSE United discord or Tim's Official GSE discord.
GSE Official - For issues with GSE - discord.com/invite/yUS9R4ZXZA
GSE United - For Sequences and help creating in GSE - discord.gg/FHDfMCmeNK
@@oakensoul i made it by my swlf with your clips thx a lot
awesome
Ok so it’s probably operator error buuut I can’t get a macro to pop up on the screen like before and I have looked every where
It's done with keybinding now. There is nothing to pop up on your screen anymore. Wow removed the ability to /click a macro with a macro, so the developer had to find another way, and that way is keybinding.
@@oakensoul I can’t get the keybinding to work unless it won’t work with binding it to your mouse wheel down
have they updated gse? i have 3.2.13-a i have a different option when i go to keybind and i dont know how too use the marco
There are constant updates, yes.
Updated video here ruclips.net/video/My2Bmyhs20g/видео.html
This is TWW beta, right? GSE doesn't seem to work in live prepatch environment at the moment. Then again, many things are broken right now. Maybe I just can't get it to work due to the changes. A little guide on how to actually write a simple sequence and put it on the action bars would be awesome. I've been tinkering for 30 mins already, all in vain.
Check out my videos. The most recent two are on live and one will show you how to make a basic sequence, the other will help you with troubleshooting to get it to work on live.
ruclips.net/p/PLOnI02AB2I0NgL2-Wzkn9RO1mdpvcf84f
@@oakensoul Thanks, I will check it out. Right now, there are so many LUA errors that I can't even open my inventory (!) unless I disable all add-ons and run a clean game. Hopefully things will get better soon. But GSE tutorials are sorely needed, especially now that GSE has changed.
hey nice video and i have sub to you. are you able to lvl with the new way of doing macros? thank you
Definitely! However, you may need to adjust the spells based on what's available at different levels. Such as Consecration, it's not in my sequence as Blade of Justice drops it, however it wont do that until you've leveled enough to get that talent.
Also I ran that raid 8 times now and no AXE drop........ bliz devs hate me
Yeah, it def sucked not getting it... Hate to salt the wound, but I got it on the 2nd or 3rd week on my pally, and on like my 1st run on my DK. ;)
Won't import how do I get it to import I copy off wow lazy macros
wago.io/juZFUmsaO
Good day. I did everything as in the video and the character does not damage
It's very difficult to know what could be causing that. You can try asking on the discord but I'm sure anyone would need more information about it
Doesn't work i have spent over 5 day i reloaded wow 3 time i removed all macos. i posted here begging for help went to live chat in gse, and i get talked down on , I'm disabled the old way was easier this way isn't the same Gěs you're on I'm 3.2.05 everything you show isn't not what my Gse is and i have the up to date, i cant even kb to 1 key nothing
The interface has changed a bit since this video was put out. But it's ultimately the same process. I'll try and make an updated import sequence video soon.
Import in general seems busted at the moment.
You may need to delete the GSE.lua file outside the game (c:\path\to\wow\_retail_\WTF\Account\YourAccountName\SavedVariables\GSE.lua)
Also, you may need to wipe your old GSE storage via
/run GSESequences = nil
/run GSE3Storage = nil
doesnt work. cant get it going.
You may need to delete the GSE.lua file outside the game (c:\path\to\wow\_retail_\WTF\Account\YourAccountName\SavedVariables\GSE.lua)
Also, you may need to wipe your old GSE storage via
/run GSESequences = nil
/run GSE3Storage = nil
Also, try here for troubleshooting help
discord.gg/D7CYYsSCCN
this shit doesn't work at all. its not giving me a macro when i do the keybind
There is no macro, you just hit the keybind.
I did and nothing happens?
Keybind is 1? Right? So that defaults to action bar button 1?
Martinez Scott Wilson Karen Lopez Daniel
Names
White Jeffrey Robinson Nancy Hall Kevin
Jimmy David Megan Jenkins Stephan
cheats
Not cheats... A lot of people do not have the ability to play the game the way you do. This helps. It's an accessibility issue. This addon in no way guarantees a perfect rotation, it essentially just hits buttons and hopes to hit the right thing at the right time.
메인 메뉴바가 안보여요
I'm not sure what the issue may be. Maybe ask on wowlazymacros.com or on the GSE united discord discord.gg/gseunited
hi, where is the icon in the macros? I cant see it, ty in advance
You should watch this ruclips.net/video/t5wQavbZoYE/видео.html
Icons do not work the same way they did before.
@@oakensoul ty for help and fast reply m8 :)