Genius Guy Restores Extremely Old Manual Forklift // Hydraulic System Restoration
HTML-код
- Опубликовано: 28 сен 2024
- ★ Contact Me: wtgroupvn@gmail.com
Genius Guy Restores Extremely Old Manual Forklift // Hydraulic System Restoration
"Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. Manual Forklift is equipped with double chain for lifting.recommended where the paving is smooth (eg warehouses) .You can lift the load both through rudder or pedal.For each pumping the forks are raised about 3 cm.The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed. The load must be evenly distributed on the forks.As with all lifting equipment, care must be taken to the security diagram.Depending on the size and characteristics of the elevator, with increasing height or distance from the center of gravity decreases the flow rate.
""""""I hope you find something useful from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself better
!!! I apologize for the mistake if I have made in this restoration !!!Thank you for watching the video. Don't forget to like and subscribe to channels""""
"" Special thanks"""
Awesome great job it looks really gorgeous. 👍
Thank you for watching, we always do our best to create the most beautiful and prestigious products
You are very good at what you do but please always wear a protective mask when welding, welders flash is very painful, ask me how I know. Thanks for sharing and best regards from Ireland.
Thank you very much, we will learn from it for the next time
brilliant restoration awesome jobmate looks great
Thank you for watching and subscribing to the channel
Polyamid-Rollen sollte man nicht lackieren, es besteht dann keine vernünftige Bodenhaftung mehr. Deshalb sind sie nicht lackiert!
👍👍😢😢😢
По ржавчине шпаклевать, это, конечно, гениально. Я бы до такого не додумался.
мы его зачистили, потом намазали шпаклевкой и покрасили
@@restorationproduct1718 там раковинки остались, а в них ржавчина. Можно было ещё пескоструйным аппаратом пройтись.
Great job on the restore, but you really should learn to turn your amps down on the welder and do a proper weld rather than spot welding like that. Spot welding doesn't melt the material to create a bond, instead it's no different than soldering because you're only throwing welding wire at it instead of melting it into the parent metal. Oh, and I don't know if you noticed or not...but you kinda greased the wrong side of the bearings. Grease works better inside the bearing lol. Just a tip, I got no complaints about your restore tho! I think it turned out absolutely awesome
Thank you very much, we need your comments and sharing your experiences, we are very happy to have an audience who shares as sincerely as you.
❤ love
Thank you for watching and subscribing to the channel
Sauber
Thank you for watching and subscribing to the channel
Ehu never knew you could fix bearings in place with hamering you have skills but dont know how to correctly use them mate waow that was painfull to watch.
Thank you for your comments, please watch our next videos
Going good till you put putty on it. Just to make it look pretty. That’s a WORKING MACHINE. Definitely lousy restoration. Will now unfollow your site
We have tried a lot of new products to be so perfect, thanks for your comments
Thought you were never going to get that foot pedal on properly. Handy tool to have in the shop.
We made another pedal ourselves, the effect is surprising, thank you for watching and subscribing to the channel
nice work. definitely some limitations to that design, but still useful around the shop
Thank you for watching and subscribing to the channel
Bravo
Thank you for watching and subscribing to the channel
U did a GREAT JOB on fixing & repairing that manual lift 👍👍 Love the Paint colors
Thank you very much, we have many other interesting videos, please watch
👌
Thank you for watching and subscribing to the channel
40:20 вот это можно было и не делать. Ленточный наждак или гриндер был бы в самый раз. Если нет, не беда, полоску наждачной бумаги взять и покрутить хорошенько.
Спасибо, что поделились своими знаниями, нам нужно многому у вас научиться
Du bist ein wirklich guter Maschinenschlosser ... stell dir mal vor mit einer deutschen Ausbildung, vielleicht sogar eine Techniker-Ausbildung oder Maschinenbau-Studium, was du da leisten könntest mit dem neuen Hintergrundwissen ... das wäre enorm. Gefällt dir dein Leben jetzt so wie es ist oder willst du mehr erreichen? Ist nur mal so eine Frage!
Wir mögen Innovationen bei der Arbeit immer, wir müssen mehr ausprobieren, vielen Dank
Thank you for watching and subscribing to the channel