Would love to see a part 2, Tom! Whatever mods, whatever changes, and - as always - your thoughts about the whole thing. Glad to see you seem in good spirits and as typically Tom as we've all grown to love! I've been watching your videos for more than a decade now and still enjoy your thoughts, your processes, your mods, and your goofy charm 🤣 Keep it up, mate - Cheers!
NOICE!!!! I have the 5000D In white and I fell IN LOVE with this when I saw It earlier! Please do a follow up video with temps and overall review please! :D
just about to partake in my new project. love the watercoolong conponents ypu used in this. can you please provide me with the pump/res model, the cpu block and the fixings for the hard tubing as they are all awsome. thanks
A dedicated build video for this case? Does the Pope crap in the woods?🙃 Yes please, Thomas! The white enamelled fittings... a perfect build for the bathroom! We MUST have a have a no-expense spared PC in every romm in the house after all!😁 The GPU looks a bit out of place with that black (or is it charcoal grey?) block, I'd have a think about what might be better aesthetically there, but even half -finished the build looks good. In your own time, but... We want MOAH! like this👍
Q: The fans at side of the case are they in right order? Didn't suppose to let air in like the front fans and the top fans and back fans let air out. Let me know if I'm right other wise I've to take mine out again.
I have the same setup in a 5000D , I run a full intake setup because my pump is on the front as well so the top rad needs more airflow and warm air is coming off that side panel so I assume his thermals are higher then mine 100%
Nice vid Tom. As always building boss looking quality rigs. Looks simular to mine without the pipes. I have same case in white too. 360ml corsair elite xt with the lcd. Just waiting for the phantec gpu vertical mount kit to mount my RG STRIX 4080 WHITE EDITION vertical. Would you know if thats going to fit? Its the Gen 4 with riser cable all in white. Thanks in advance T. Keep doing what ya doing. Talented guy. Congrats from Liverpool. 1 sub and like added.
That right side panel... that would go straight in the bin. A wobble board that looks like it is off a £30 case from ten years ago. Would a TG right hand panel for a 5000X swap in? It is from what I can see the same carcass. This is the first Corsair case with the white/grey going on that had my first reaction be "NO!". Especially when I saw the iCUE 5000X RGB QL Edition Mid-Tower ATX Case - True White when I flicked over to Corsair. I want that with the right-hand TG and vanity doors with this 5000T aesthetic. I also want to know where the £350 price tag comes from. I guess if I want this my way I would have to merge two cases and maybe do some chassis modding. I do really like it otherwise, but imagining what it could be and the gougy silly price for what it is - a made over chassis not requiring that much new tooling and a cheapo side panel from yesteryear - rather spoils it. Plus the video isn't ten yards long! 🤣My pint of tea didn't have a chance to go cold and I only got to dunk 2 biccies. But have an Internetz for the build and remember: make haste slowly and enjoy.😉
How thick a radiator is there in the top? I would really love to know how thick a radiator I can fit while still being able to do the same tube runs. @OC3D TV
My loop is the exact same order as this. Out the pump then into 2 rads. You wouldn't believe how many goofballs try to say I need to let it cool something before it goes into rad lol. I'm like uhh ya it don't work like that LMAO.
I really want to water cool my current rig but I don’t know my arse from my elbow with water cooling. Does anybody reading this offer services along those lines. I’m in the north west of England.
There was no coolant in it no dude - I did say it needed leak checking. Sadly the info on what ports to use have been less than helpful as it sounds like you have found out too
this is the most overpriced case i've ever seen. their LL120's are truly awful fans, and for the price it should be the QL's and still maybe 4+ of them. really nice to see Tom build a hardline loop. been waiting a long time to see him jump back into the watercooling game. It's a very clean build. shame he didn't finish it.
Would love to see a part 2, Tom! Whatever mods, whatever changes, and - as always - your thoughts about the whole thing.
Glad to see you seem in good spirits and as typically Tom as we've all grown to love! I've been watching your videos for more than a decade now and still enjoy your thoughts, your processes, your mods, and your goofy charm 🤣
Keep it up, mate - Cheers!
Thank you fella x
Looking forward to part two Tom. Cheers!
Yeah Tom, Part 2 and more of this, i missed your enthousiasm over the years, keep em coming!
I really missed these build videos from you Tom :) These videos inspired me to build rigs with custom loops :)
Beautiful case price is absolute madness too expensive but yeh wanna see a part 2
NOICE!!!! I have the 5000D In white and I fell IN LOVE with this when I saw It earlier! Please do a follow up video with temps and overall review please! :D
Very nice build! Cant wait for part2!
Please part 2 .This is beautiful.
Loving this case! Beautiful build
I have the same psu, but its black and with red sleeved cables. White just looks super gorgeous in this build❤
This is a pretty neat case. I would consider something like this if I didn't have a full height capture card and I didn't recently buy a new case.
Cheers Tom, best wishes brother.
Keep up the great work.
yup, part 2 please. It's looking goooooood. £350 too much though. My 5000X cost me £120. Do like the swing out doors though for easy access
Wicked Guv! And yes please to finishing it :)
love the water cooling tom need to see end setup
just about to partake in my new project. love the watercoolong conponents ypu used in this. can you please provide me with the pump/res model, the cpu block and the fixings for the hard tubing as they are all awsome. thanks
Love the chopping board, where is that from? I have a build incoming in that case and a spinning base would be brilliant.
This case really seems like a V2 of the Graphite 780T (which I'm still using :), would be pretty cool to upgrade to this one if not for the price XD.
For that price they needed to include a rear fan.
In the ql edition there is the rear fan 3 in the front and 1 behind
That pretty white Asus formula board would look nice in this case, Tom. With some fat glass tubes. Personal rig refresh perhaps?
It probably wont end up in this case though...... ;)
most def. part two please Tom, ta! 😀
Fill it Tom!!! Let's see those temps
Part 2 please. Will you paint the GPU waterblock white as well?
great vid, have a question though, what is that thing at the bottom of the front 3 fans?
That chase is masterpiece...I just cant see how you hit it.
I would be down to see a part 2
There's something about a white case and white light that looks great
Beautiful PC. What motherboard is that?
please do part 2! not usually a fan of RGB but on white ... oooo
A dedicated build video for this case? Does the Pope crap in the woods?🙃 Yes please, Thomas! The white enamelled fittings... a perfect build for the bathroom! We MUST have a have a no-expense spared PC in every romm in the house after all!😁 The GPU looks a bit out of place with that black (or is it charcoal grey?) block, I'd have a think about what might be better aesthetically there, but even half -finished the build looks good. In your own time, but... We want MOAH! like this👍
Amazing case
Q: The fans at side of the case are they in right order? Didn't suppose to let air in like the front fans and the top fans and back fans let air out. Let me know if I'm right other wise I've to take mine out again.
I have the same setup in a 5000D , I run a full intake setup because my pump is on the front as well so the top rad needs more airflow and warm air is coming off that side panel so I assume his thermals are higher then mine 100%
How many different fittings did you use?
So if gpu are side ways, how do you close the case without suffering the fans against the glass
Looking forward to 'Part 2: 5000T Unicorn Puke Party'.
Nice vid Tom. As always building boss looking quality rigs. Looks simular to mine without the pipes. I have same case in white too. 360ml corsair elite xt with the lcd. Just waiting for the phantec gpu vertical mount kit to mount my RG STRIX 4080 WHITE EDITION vertical. Would you know if thats going to fit? Its the Gen 4 with riser cable all in white. Thanks in advance T. Keep doing what ya doing. Talented guy. Congrats from Liverpool. 1 sub and like added.
Reminds me of the Silentbase 601 and 802,and double the price
Yes please Tom👍
I have the 7000X, thats more than enough!
That right side panel... that would go straight in the bin. A wobble board that looks like it is off a £30 case from ten years ago. Would a TG right hand panel for a 5000X swap in? It is from what I can see the same carcass. This is the first Corsair case with the white/grey going on that had my first reaction be "NO!". Especially when I saw the iCUE 5000X RGB QL Edition Mid-Tower ATX Case - True White when I flicked over to Corsair. I want that with the right-hand TG and vanity doors with this 5000T aesthetic. I also want to know where the £350 price tag comes from. I guess if I want this my way I would have to merge two cases and maybe do some chassis modding. I do really like it otherwise, but imagining what it could be and the gougy silly price for what it is - a made over chassis not requiring that much new tooling and a cheapo side panel from yesteryear - rather spoils it.
Plus the video isn't ten yards long! 🤣My pint of tea didn't have a chance to go cold and I only got to dunk 2 biccies. But have an Internetz for the build and remember: make haste slowly and enjoy.😉
How thick a radiator is there in the top? I would really love to know how thick a radiator I can fit while still being able to do the same tube runs. @OC3D TV
30mm thick Corsair radiator
@@OC3D do you believe a 40mm rad will fit in the top?
looks like it should be on a float in the Mardi Gras
You Really F$$$ed this one up Tom
Awesome video and an awesome amazing build. The case is lovely but that crazy price! I would buy the case without all the rgb gubbins
Can the top handle a 420 rad?
what distro res did yu use?
this i think Corsair's Hydro X Series XD7 RGB Pump/Reservoir Distribution Plate,
Nice to have 4 USB ports, but I'll stick with Fractal's Torrent.
front face gpu was a bad idea coz of the colour, but the rest look good.
Got an 7000x + 4 LL120 and still cheaper than this, how this can cost 399?
Another one pls
Why not go radiator cpu radiator gpu?
Please sir, can I have some more?
Part 2, please, with the completed loop, then a teardown and rebuild with air cooling, please.
I dont think youll get me doing ANOTHER build in this one.
Cool Case. But what surprises me the most is that you are married bro, I can't believe it, but that gives me hope, it should give hope to all men lol
Im not married fella - I am a lucky boy though :)
Who at Corsair thought it was a great idea to have a PSU cutout in a case this expensive?
Not the only company that does it
760t... like, 780t... like too and the 5000t yupp... another like
My loop is the exact same order as this. Out the pump then into 2 rads. You wouldn't believe how many goofballs try to say I need to let it cool something before it goes into rad lol. I'm like uhh ya it don't work like that LMAO.
I really want to water cool my current rig but I don’t know my arse from my elbow with water cooling. Does anybody reading this offer services along those lines. I’m in the north west of England.
Bro. I just did my first custom loop. It aint that hard. Just watch a bunch of videos. I live in Holland sadly otherwise I would helped you.
PART 2 I ment
You obviously didn't fill it.... I used the same ports as you same orientation and it doesn't work..... It doesn't allow you to use it as a reservoir
There was no coolant in it no dude - I did say it needed leak checking. Sadly the info on what ports to use have been less than helpful as it sounds like you have found out too
@@OC3D lol yes I found out the hard way and had to redo my loop on a client build on the same day as he was picking it up 🤦♂️
2nd I love Corsair cases
this is the most overpriced case i've ever seen. their LL120's are truly awful fans, and for the price it should be the QL's and still maybe 4+ of them.
really nice to see Tom build a hardline loop. been waiting a long time to see him jump back into the watercooling game. It's a very clean build. shame he didn't finish it.
I would quite happily buy this case without all the rgb gubbins
nice case but ya forgot to wire up the top and botom case rgb stips ^^ oops dit not watch til end whahaa
400$ for a case is a bit ridiculous
Comment..Comment.. From İstanbul...
OMFG -3 ARGB lines... meh.
£350 lol
1st
Be quiet! Silent base 802 just copy and paste almost 😒