My motor requires you hold down a green button on the left side to make the motor run. Otherwise, mine looks exactly like yours. I'm its second owner. When I push it, is it SUPPOSED to keep the engine running (maybe malfunctioning)? Or, do I have to rewire it to a standard switch?
interesting. You could test if the switch is defective. I don't know if holding the switch opens or closes the circuit, you can try both. If the switch can be disconnected, try it without the switch (open), and then put a jumper across the connectors to bypass the switch (closed). If one of those works, then the switch needs to be replaced. If not, then something else is your problem.
Yours is the more common type the push button is an extra safety measure so you will have both hands towards the rear of the machine and out of the way. This one with a switch always on is unusual but I like it. Just wondering though if leaving it running all the time is creating extra heat and damaging the hydraulic pump or something??
Its the newer safety system.go to harbor freight and buy the foot switch made for power tools.that way you work the motor with your foot and you have a hand to hold the wood
I have one of these and it only moves half way and stops im trying to figure out why, I think that it has no pressure maybe? I found it in a old shed but it turns on just fine 🤷♂️
My splitter has the exact same switch. you have to hold it in in order for the pump to run. I assumed that DR did this as a safety feature so that both of your hands were occupied when you were splitting. it is a pain and I am considering replacing the switch
Thanks for the info re the hydraulic fluid check!
Glad to help
Thanks for the tutorial. 👍 I just got one of these.
You are welcome! Good luck with it.
Thank you really appreciate it.
You're welcome!
My motor requires you hold down a green button on the left side to make the motor run. Otherwise, mine looks exactly like yours. I'm its second owner.
When I push it, is it SUPPOSED to keep the engine running (maybe malfunctioning)? Or, do I have to rewire it to a standard switch?
interesting. You could test if the switch is defective. I don't know if holding the switch opens or closes the circuit, you can try both. If the switch can be disconnected, try it without the switch (open), and then put a jumper across the connectors to bypass the switch (closed). If one of those works, then the switch needs to be replaced. If not, then something else is your problem.
Yours is the more common type the push button is an extra safety measure so you will have both hands towards the rear of the machine and out of the way. This one with a switch always on is unusual but I like it. Just wondering though if leaving it running all the time is creating extra heat and damaging the hydraulic pump or something??
Its the newer safety system.go to harbor freight and buy the foot switch made for power tools.that way you work the motor with your foot and you have a hand to hold the wood
I have one of these and it only moves half way and stops im trying to figure out why, I think that it has no pressure maybe? I found it in a old shed but it turns on just fine 🤷♂️
Check and make sure it has enough hydraulic fluid in it.
My splitter has the exact same switch. you have to hold it in in order for the pump to run. I assumed that DR did this as a safety feature so that both of your hands were occupied when you were splitting. it is a pain and I am considering replacing the switch
I have the same splitter, 2nd owner. Slow leak, how much Lucas stop leak should I use along with hydraulic fluid?
I wouldn't use it. i would replace the o-ring, or whatever is leaking.
😊
need seal kit for this unit. Not available fro DR
That is unfortunate. Have you tried looking up the part number elsewhere? Sometimes you can find stuff from aftermarket suppliers or ebay even.
Hi how much arer the dr spliters
Google tells me Ace Hardware has a 6 ton splitter for $379.99
What model is this one?
I don't have a record of the model, other than what is in the video, and I no longer have this splitter.
Man. You got rid of it or did it go down?;I like this. The newer seem a little weak?
@@joshmatty1077 I sold it. I was not using it and tripping over it in my garage, so I tried to find it a home where it would get used
That thing is loud
A little. I think the camera microphone and being inside made it seem worse.
My a 😊