The ITX case you need for MAX airflow

Поделиться
HTML-код
  • Опубликовано: 31 июл 2023
  • Check prices of the Meshroom D here:
    Amazon: geni.us/TOMBd
    Newegg: howl.me/ckLxfBPKivw
    Product official link: ssupd.co/products/new-meshroom-d
    Check prices on Amazon below:
    Noctua NH-D12L: geni.us/h3rgCjS
    Noctua NH-L12S: geni.us/dGpGDY
    Noctua 140mm fans: geni.us/b1sdM1
    Noctua 80mm fan: geni.us/yAuFE
    NZXT Kraken 240: geni.us/xqJEOg
    RTX 4070 Ti: geni.us/iZGHr
    Thermal Paste: geni.us/1pArwJx
    AMD Ryzen 7 7800X3D: geni.us/p6Jga
    ASUS ROG Strix B650E-I: geni.us/tw4F
    32GB of DDR5-6000: geni.us/OPmg1d
    Samsung 980 Pro: geni.us/LxoZ
    RTX 4080: geni.us/h7dK
    Corsair SF750: geni.us/DQAn8BZ
    Fan Hub: geni.us/85ZRPO
    Offset Brackets: geni.us/XBd0
    This is the Meshroom D, a new case from SSUPD. In this video, we explore different cooling setups to see what this case can handle. With its clean and minimal look and all that airflow for great cooling, this is definitely a case worth checking out.
    🎥 CAMERA GEAR:
    Check prices on Amazon below:
    Sony A7 iii: geni.us/XtxN1
    Sony 28-70mm Lens: geni.us/0SK2
    Sony FE 20mm F1.8 G Lens: geni.us/rcXK
    📸 Instagram - / devyn.johnston
    When you buy through an affiliate link, I may receive a commission on the sale at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
  • НаукаНаука

Комментарии • 204

  • @ingemarcruz
    @ingemarcruz 6 месяцев назад +12

    Bought this case, it´s the most versitile mini itx case I ever had (I had Cooler Master NR200, Lian Li TU150, Silverstone SG13B, Corsair 250D). You can mount PSU multiple ways, top can be bottom, power cable can be reposition, power button can be reposition, fan mounts on top, bottom, front and back, water cool up to 240mm, IO can be moved to top or bottom, I can deshorud my GPU to let 2x140mm cool it, etc

  • @tongoso
    @tongoso Год назад +17

    You're killing it with the intros!, thanks for sharing thoughts and comparison with things like big graphic cards, pros and cons , and what you used to control cooling with the NZXT AIO.

  • @akdiddy666
    @akdiddy666 6 месяцев назад +22

    I did this build, the Corsair adapter allows a 4090fe to fit without issues. Running a 7800x3d, d12l cooler, 1x140mm exhaust fan on the side, Corsair adapter on the 4090 FE, 80mm rear exhaust fan. It all fits. Even with an SFXL power supply

    • @scatmanj101
      @scatmanj101 5 месяцев назад

      the corsair adapter? like their 12vhpwr cable that they sell or are you talking about something else, cuz honestly that's the only thing stopping me from getting this case

    • @KR-qp8ro
      @KR-qp8ro 5 месяцев назад

      @akdiddy666 what are your CPU temps?

    • @paulbarriosduque1101
      @paulbarriosduque1101 2 месяца назад

      Is D12 set as exhaust as well?

  • @din_fpv
    @din_fpv 11 месяцев назад +20

    Awesome review! would be great to see a visualization of different cooling options (temps CPU & GPU vs noise)!

  • @zahiddamien9167
    @zahiddamien9167 Год назад +14

    I went to the main site after looking at your review of the case. What caught my eye in the explanations was the capability to install 3 x 3.5" Drives. Which most cases otherwise, would be the most difficult thing to do.

  • @canvargun
    @canvargun Год назад +1

    Great videos. To the point, clean and clear.

  • @XfarglesX
    @XfarglesX 9 месяцев назад +1

    There are usually 180 degree power adapters available. I had to get one for my build. They’re not expensive and really opens up mounting options.

  • @Swatmat
    @Swatmat 9 месяцев назад +2

    this looks great, for those who wanted a Dan C4 SFX but couldnt get one, this might be a suitable replacement

  • @faithsaya
    @faithsaya 9 месяцев назад +1

    production quality top tier as always, great video

  • @HardwareFRA
    @HardwareFRA Год назад +1

    There is some slim U-shape pci-e connectors that can move the connector to the top of the gpu, but can hit the aio / aircooler depends to its position.

  • @adinnugroho6544
    @adinnugroho6544 Год назад +1

    This is what I actually like, even your black hoodie that catch my attention most

  • @americangulag
    @americangulag 11 месяцев назад +1

    bruh why your clips always are so clean. got a sub from me.

  • @kensg
    @kensg 11 месяцев назад

    Again...Beautiful build!

  • @masterdftw4983
    @masterdftw4983 Год назад +8

    Your videos are so clean and to the point. Subbed and I will def be getting this case!

  • @tlm-dev
    @tlm-dev 11 месяцев назад +1

    Awesome video bro!

  • @KollywoodReview
    @KollywoodReview Год назад +6

    10 mins before I was searching for Meshroom D in RUclips 😂🤩♥️ Your video is out now 👍
    Love from India 🇮🇳

  • @lungisaninkosi5724
    @lungisaninkosi5724 11 месяцев назад

    Awesome build👍

  • @AxleLotl
    @AxleLotl Год назад

    Nice vid, this case is like a proper side up C4 SFX 😂

  • @mixedd69
    @mixedd69 7 месяцев назад +8

    I have a small suggestion that could come in handy to some group of people. When you show CPU temps or even GPU temps, show also a fan RPM's, that way we will have some idea about potential noise floor that specific build will have in this case (not ideal but better then without this info).

  • @ezphantom
    @ezphantom 10 месяцев назад

    Great stuff. Thanks.

  • @reallybro00
    @reallybro00 8 месяцев назад +11

    Worth mentioning the nr200p has relatively large feet compared to the meshroom, you can get smaller, even print your own to get the height you want, just thought id put this out there as they are very similar in dimension

    • @zoro-i8u
      @zoro-i8u 6 месяцев назад

      You mean print a case or print the feet? How would I go about that? Is it worth it?

    • @reallybro00
      @reallybro00 5 месяцев назад

      print feet. there are free ones online
      @@zoro-i8u

  • @KaushNoKash
    @KaushNoKash 11 месяцев назад +1

    nice vid as always

  • @Manulajes
    @Manulajes 10 месяцев назад

    SSUPD has never missed ever since their debut

  • @GavxOnline
    @GavxOnline 11 месяцев назад +8

    if it could fit a 4 slot graphics card it would be close to itx perfection if the build quality is on point. wish they would get rid of the support for ATX mobo and psu and just commit to SFX with their ITX cases.
    really liked how you laid the other itx cases together though. great vid as always.

  • @allengonzalez7693
    @allengonzalez7693 Год назад

    Can you also do some cooler/fan configuration on the regular CM NR200

  • @KetoRayGaming86
    @KetoRayGaming86 Год назад

    Perhaps the new Corsairs 12VHPWR-adapter will fit with the FE cards from nVidia. I see that the case also does fit an mini-DTX like my Asus Impact X570 board. I'm interested.

  • @tjcarlover6701
    @tjcarlover6701 4 месяца назад

    Could you make an update video showing the new accessories and the vertical setup

  • @ssl1940
    @ssl1940 Год назад +1

    could motherboard standoffs be lowered a little so that a nh-d12l could fit perfectly?

  • @orangechannel4862
    @orangechannel4862 10 месяцев назад

    A great thing for sane money! Just created for iron with a total consumption of no more than 300 watts. 12400 + 4070 will fit perfectly, but for something hot you need a bigger case.

  • @Noodlepunk
    @Noodlepunk 11 месяцев назад

    What do you think would be the best case for lan parties. My main pc is way to large and heavy to be bringing it with me to play games at my friends house.

  • @Neurotoxus
    @Neurotoxus 10 месяцев назад

    I have a meshlicious myself, but love this (sandwich?) design. was considering the Form T1...but...

  • @Spudurmun
    @Spudurmun 7 месяцев назад

    Might be my next build

  • @jeffreystangojr
    @jeffreystangojr 6 месяцев назад

    Would this be a good case to use until the next version of the Dancase C4 actually releases? It seems like this case is the most transferable to that.

  • @sazlefraz
    @sazlefraz 9 месяцев назад +1

    hey do you think its possible to mount a fan controller in the system with 2 2.5 ssds? And also how do you think the noctua Nh C-14s would fit with the 140 mm fans mounted on the bottom with the 140 mm side fans?

  • @ColemakDH
    @ColemakDH 10 месяцев назад

    I would love to see this compared to the Formd T1

  • @DiRTDOG187
    @DiRTDOG187 11 месяцев назад

    What flexible cables do you recommend?

  • @AnthonyMalesys
    @AnthonyMalesys 9 месяцев назад

    I'm interested in this case but I love the ASUS PRIME 201 (mesh) too. Still don't know what to choose.

  • @cognition26
    @cognition26 11 месяцев назад

    it's an excellent case.

  • @Magnus357
    @Magnus357 6 месяцев назад

    Which direction did you have the NH-L12S fan blowing in your config? I would think it would be away from the motherboard with the 2x140mm in exhaust modes. I really like that config as it seems better than blocking all the airflow with a huge heatsink - and your results seem to bear it out.

  • @keenlee3981
    @keenlee3981 4 месяца назад

    When u set your side fans to exhaust with your low profile CPU cooler, did you flip over the fan for the CPU cooler as well to achieve 5 degrees difference in temp?

  • @xtrickfilax7052
    @xtrickfilax7052 5 месяцев назад

    i'm curious what would happen if you used1 push and 1 pull for the 2 fans, probably not most efficient but just curious

  • @Mumuyal
    @Mumuyal 11 месяцев назад

    with atx psu and aio it's can?

  • @barfy362
    @barfy362 10 месяцев назад +4

    The width issue is a dealbreaker. I bought a narrow case once and won't make that mistake again, especially since I prefer big air coolers for my CPU.

  • @allengonzalez7693
    @allengonzalez7693 Год назад

    Can you do a review for Dan C4 SFX, nice quality though.

  • @Sly_Kaw
    @Sly_Kaw 11 месяцев назад

    Does this case have passthrough holes near the rear for watercooling?

  • @constantinosschinas4503
    @constantinosschinas4503 2 месяца назад

    Would like to see how a mATX fits in there. For an sfx pro pc, more ram and m.2s, are very welcome.

  • @GibbonActivist
    @GibbonActivist 9 месяцев назад

    Just curious what do you do for a living?

  • @miscetc-tm2yt
    @miscetc-tm2yt 2 месяца назад

    Very good video. 🙏

  • @KR-qp8ro
    @KR-qp8ro 5 месяцев назад

    I've got this case with a 7800x3D and an Asus rog b650e and a 7900 XT. I purchased the D12L but after watching this I'm not sure now if I should go with a C14s + 2 exhaust fans, so I've ordered one today. Still have to start the build. Any advice?

  • @lvlmedyza7409
    @lvlmedyza7409 Год назад

    how wide exactly is the gpu able to be without the power cable stopping the panel to close, thinking of upgrading to a mini itx 12600k 3080 from a 4000d 11600ks 3060 ti

  • @d00fin
    @d00fin 7 месяцев назад

    can you fit 2 140mm slims on the bottom of the case and one on top of the mobo side?

  • @sunbun148
    @sunbun148 11 месяцев назад +1

    Maybe i suggest visual airflow diagram in future videos like Mr. Matt Lee on youtube. I surely would appreciate it as it provides a nice visualization of how good or bad airflow is in systems.

  • @MrAbinthani
    @MrAbinthani 11 месяцев назад

    im doing the exact same build , we need a performance video FPS and Stats for MW2 and other games pls

  • @joza5422
    @joza5422 20 дней назад

    i got the same build minus the gpu i swooped it out for the 7700xt raedeon and now my pc shut up every time i play a few games the build is amazing just wish it stopped cutting off on me.

  • @hman2875
    @hman2875 11 месяцев назад

    dream mini workstation machine (can fit matx mobo = more ram)

  • @ericsoncarter1662
    @ericsoncarter1662 5 месяцев назад

    I build one too, with 11900K and MSI RTX 3080 and an AIO CPU Cooler by cooler master. First at all, other than in this video, the manual says that the AIO Fans have to intake the airflow in the case. So they are mounted between the radiator and the case panel. Not IN the case. Like in the video. Than u get better temps. I matched it with a 11900K @ 5 GHz at 1.235V for mostly max 65 degrees and an undervolted 3080 1830 MHz at 850mV for around max 72 degrees. It depends on the game. Especially „The Finals“. Than the whole case in on fire.
    I don’t recommend to use an ATX PSU because you haven’t enough space to build. If u want to use an AIO by arctic, maybe th liquid freezer 240, it doesn’t fit, because the tubes at the pump aren’t bendable. So they push in the radiator and you can’t mount the radiator.
    I would recommend to use a smaller GPU without an extreme overclocking setup. My 3080 had before the undervolting always an heat limitation because the card takes so much power, standard config by msi, that it gets hotter and hotter (max. Locked Temperatur is 83 degree) . After the undervolting everything is still and cool.
    I play in 2k and i want alle the fps i can get.
    I would recommend to use this case and its setup for 1080p or for a fixed fps like 60 so you don’t have to optimize the whole system.
    I hope that i could help u with my experience. :)

  • @kasonligas
    @kasonligas 11 месяцев назад

    Im lost. Im using a 240mm ek cr240 dark on a ryzen 7 7700 (non x) so you would think tempe would be cold but my idle temps are around 40°c and load temps jump to 75-80°c not sure if i got a dud with the silicone in my chip or the aio or if i should go with the dual tower air cooler and add a 140mm exhaust

  • @simonnovak
    @simonnovak 11 месяцев назад

    DAMNIT and i just built a Meshroom S. THIS IS SICK!!!!!

  • @zhihangchen9228
    @zhihangchen9228 10 месяцев назад

    any mini case would fit in a 360 cpu cooler and 3080ti?

  • @antoniskazou
    @antoniskazou 11 месяцев назад

    In their promotional images they use an NHD12L which is odd considering it's above their maximum height.

  • @kaziu2eq
    @kaziu2eq 11 месяцев назад

    Big noctua cooler with back fan pulling air in and one side fan set to exhaust??

  • @mrbiggs3656
    @mrbiggs3656 Месяц назад

    I have this case with and air setup. Basically the exact same as he had it with the 140mm fans set to exhaust but my thermals are way higher. My gpu gets to 85C :(

  • @aids4752
    @aids4752 5 месяцев назад

    I recently upgraded my pc with the same motherboard and cpu combo but I'm running into some issues, like no output and not posting at all. I was wondering if you had any of these issues.

  • @mohamadezzatsakbani7172
    @mohamadezzatsakbani7172 10 месяцев назад

    Hi , i have Atx psu and 240 mm Aio withe Itx motherboard. Is it gonna fit inside this case. 😅

  • @valentinoohp
    @valentinoohp 11 месяцев назад

    When's the release? I want one

  • @jeromerelayson3850
    @jeromerelayson3850 10 месяцев назад

    Does the power supply come with 12vhpwr cable?

  • @Helios.vfx.
    @Helios.vfx. 3 месяца назад

    Is it possible to have a build with a 7950x or upcoming 9950x ?

  • @user-tk5ir1hg7l
    @user-tk5ir1hg7l 11 месяцев назад

    Will this fit an ASUS 4090? Know any itx cases that will?

  • @SIDEWISE
    @SIDEWISE 5 месяцев назад

    Would a 280mm liquid CPU cooler radiator fit?

  • @human-wx3ql
    @human-wx3ql 10 месяцев назад

    What is an extender bracket?

  • @dabbzgaming3971
    @dabbzgaming3971 10 месяцев назад

    As someone who built a 12700kf build in a NZXT H1 V2, this is definitely the one I should have waited for

    • @NeoVester
      @NeoVester 10 месяцев назад

      I just bought a H1 V2 and while it's being shipped I'm having second thoughts, if you don't mind me asking what exactly bothered you with the H1?

    • @dabbzgaming3971
      @dabbzgaming3971 10 месяцев назад

      ​@@NeoVesterit's great and a perfect choice for the itx size, I personally just have high end parts in it and it just gets a little warmer than I would like, and it's not that bad I Max out at ~85c but I want something with a fan or 2 more.

  • @Flashks
    @Flashks 4 месяца назад

    reminds me of the c4SFX

  • @alexbedini731
    @alexbedini731 Месяц назад

    Hello guys, can anyone confirm if this case can support the Liquid Freezer 3 240 AIO ? I want to upgrade my mini itx case to this one and also upgrade form 120 aio to the aforementioned one but i worry about hte height of the pump and the width of the freezer 3 240

  • @gucky4717
    @gucky4717 11 месяцев назад

    The case is just 1.5-2,5cm too narrow. That would make the 4090FE fit and also a better CPU air cooler.
    A power button on the back is also strange for me...and no reset button.

  • @sgpc217
    @sgpc217 11 месяцев назад

    nice case. 😁😁😁

  • @moop1522
    @moop1522 11 месяцев назад

    Is there a micro ATX option

  • @kenagekenage4928
    @kenagekenage4928 9 месяцев назад

    Just started watching your channel Devyn and it is great for smaller builds. Do you think the meshroom D is ok to use the Asus SFX-L PSU you used in a different build? Would it be too long to fit in this case? Thanks and keep up the great work! 🙌

  • @daesz
    @daesz 5 месяцев назад

    i wish ssupd produce case like that but with lower volume (9to11l) :c

  • @nehron17
    @nehron17 9 месяцев назад

    hola cabe una grafica con las medidas GPU : 316 x 121 x 56 mm ?? SALUDOS

  • @jeromerelayson3850
    @jeromerelayson3850 10 месяцев назад

    Hi can this fit a 4090 FE?

  • @chicoloco4012
    @chicoloco4012 5 месяцев назад

    can i use 240 rad with atx psu at the same time?

  • @anonymeralkoholiker2880
    @anonymeralkoholiker2880 11 месяцев назад

    Hi guys im new to ssf. I Gott 1,5k to spend for my First itx Build. Playing Valorant and Diablo 4. Any recommendation which Parts to Choose? Thx for help

  • @TheBigBlueMarble
    @TheBigBlueMarble 3 месяца назад +1

    One issue...horizontally mounting a GPU that uses a vapor chamber for cooling (most of the current generation of GPUs) causes them to be less effective.

  • @allwheeldog
    @allwheeldog 5 месяцев назад +1

    With your L12S setup, did you have the CPU fan pushing air up through the heat sink when the fans on the case where set to intake and/or exhaust. Im trying to track down the reason why mine runs much hotter than yours with more fans shoved in my case. I have the C14S with a dual fan set up both in exhaust and my temps are always around 75-80 in games so far. I would think with my bigger heat sink i should see lower temps that. Might just be my fan curves are set wrong as well

    • @JamesTodd
      @JamesTodd Месяц назад

      pretty sure he had the L12s set to push the air through the heat sink.

  • @SoFRESHandSoMJ
    @SoFRESHandSoMJ Год назад

    can additional fans be added on top of the case?
    also this might sound weird but if I get this case, I’d probably flip the case upside down so that the gpu gets a little more airflow 😅

    • @hman2875
      @hman2875 11 месяцев назад

      hmm give me updates if you do that, very curious

    • @yanni-duff
      @yanni-duff 3 месяца назад

      why not just get the meshlicious or the meshroom S then?

  • @marksulloway5669
    @marksulloway5669 Год назад

    Another air cooler option: The Thermalright Silver Soul 135 at 135mm.

    • @elteacher0223
      @elteacher0223 Год назад

      You're right and the SI-100 Low profile too -at only 100mm high is perfect because it also blows air to all the components on the mobo (PCH, VRM and SSDs)-

  • @Bimboms
    @Bimboms 11 месяцев назад

    negative pressure when theres little room for cool air to travel in a SFF makes a lot of sense.

  • @petercheca
    @petercheca 11 месяцев назад

    90 degree cable from cablemod, not the adaper

  • @mr.electronx9036
    @mr.electronx9036 11 месяцев назад

    SSUPD has unique cases

  • @airixxxx
    @airixxxx Год назад

    MATX testing on the case would be nice.

  • @tetryl1
    @tetryl1 3 месяца назад

    Ummm are you sure it fits an mATX motherboard? Meshroom's page does not say that at all. I allmost bought it because of what you said :p.

  • @Fabiansterll123
    @Fabiansterll123 Год назад

    Hey Devyn and comment section. What is the FPS and Temp overlay you are using ingame?

    • @devyn.johnston
      @devyn.johnston  Год назад

      MSI Afterburner

    • @Fabiansterll123
      @Fabiansterll123 11 месяцев назад

      @@devyn.johnston Thanks! but how did you manage to make it look like that then? :D

  • @justeddm
    @justeddm 11 месяцев назад

    The best case that will destroy this category is Dan case a3 matx , though it's taking forever to be released

  • @TV-jw8su
    @TV-jw8su Год назад

    It's a pity that there is no m-atx motherboard mounting nut. This is a case that cannot properly support the motherboard.

  • @dawsonpoe
    @dawsonpoe Год назад +1

    Can you build in the KXRORS S500? It is normally a $200 case.

    • @devyn.johnston
      @devyn.johnston  Год назад +2

      I have the case and am planning a build soon!

    • @dawsonpoe
      @dawsonpoe Год назад

      @@devyn.johnston Ok, cool and thanks. I’ve been considering buying the case but I’m still wandering the liter size of the case. The S400 is supposed to be slightly under 11L so I’ve been trying to figure it out.

  • @Original_Moi
    @Original_Moi 4 месяца назад

    it a flipped c4-sfx that u can actually buy

  • @SoarDoesGaming
    @SoarDoesGaming 11 месяцев назад

    looking to swap my Lian Li A4 h20 into this case. running a 240mm rad, Ryzen 7 7700, and sapphire pulse 7900 xt. I plan to try and get a top exhaust fan as well as a front for sure an Arctic P14 slim fan intake and a 92mm Arctic exhaust fan with my AIO being an exhaust with the Arctic P12 PWM PST fans. (current CPU idle temps are at 49C don't ask me how I have it at a 1.125V UV and an 85w cap Why it's not cooler on idle after reseating CPU pump block with 3 different thermal pastes it has to be the chip itself)

    • @arksnoah
      @arksnoah 10 месяцев назад

      Currently in the market for comparing this Meshroom D and the A4-H20. May I ask you personal reasons for looking to switch over? Thanks in advance!

    • @d00fin
      @d00fin 7 месяцев назад

      @@arksnoah if you haven't gotten a case yet. i'm going to be switching from the meshroom s to a meshroom d mainly because of no pcie riser, a little cheaper, and i prefer a landscape orientation. i have also used an a4 h2o. i didn't stick with it because the meshroom cases just provide better thermals.

    • @arksnoah
      @arksnoah 7 месяцев назад

      ​@@d00finthanks for the reply! I ended up buying the Meshroom D and put a 4090 and 7800x3d in it. It's amazing.

  • @Spawn223311
    @Spawn223311 11 месяцев назад +1

    Wonder if the noctua NH-C14S would make the cpu even cooler

    • @groncke1337
      @groncke1337 10 месяцев назад +1

      Also interested in this

    • @Spawn223311
      @Spawn223311 9 месяцев назад

      ​​@@groncke1337just checked and it fits with 2 140mm fans attached, but the side fan brackets need to be removed. So it would need a solution to mount the 3rd 140mm fan that goes on the right side. Those 3 140mm fans would cool this thing even further

  • @user-ki5hs9wd2r
    @user-ki5hs9wd2r 11 месяцев назад +9

    Can confirm: RTX 4080/4090 FE fits so long as you use Corsair’s 600w PCIe power cable (type 4) for direct connection to your SF750.

    • @CeltyST96
      @CeltyST96 11 месяцев назад +1

      How are temps on the Fe in this case?

    • @Spawn223311
      @Spawn223311 11 месяцев назад

      ruclips.net/video/5F96DebEgJg/видео.html
      example at gpu mounting part

    • @jeromerelayson3850
      @jeromerelayson3850 10 месяцев назад

      Hey bro does the Psu comes with 12vhpwr cable?

  • @boldmalisid
    @boldmalisid 9 месяцев назад +1

    Is itx case for the mini itx mobos?

    • @hawwat
      @hawwat 9 месяцев назад

      Yes