I just used ddp plate for my springfield xds mod2. The hellcat plate has the same foot print as the mod 2. Just in case anyone is curious and the mod 2 conwitnesses for those who want to know.
I just bought a Hollison same set up. I was wondering the same thing if you had any issues with the screws that came the optic. I just used the ones they came with the DPP adapter.
I used both, left screw from holosun(longer), right screw from DPP adapter(shorter). Basis would be comparing the length of the DPP screw in the Optic + DPP adapter plate vs length of the glock screw in the MOS cover Plate. Hope this helps!
Depends on the optic your using. The one I’m installing is a Holoson 507K which doesn’t have the footprint that allows it to mount to the Glock 43x MOS without a plate
Yes she is holding up so far. I’ve only been able to put a hundred rounds though. I want to put at least 500 before I place the stamp of approval on it.
For me I used both, left screw from holosun(longer), right screw from DPP adapter(shorter). Basis would be comparing the length of the DPP screw in the Optic + DPP adapter plate vs length of the glock screw in the MOS cover Plate. Hope this helps!
Skip to 8:30 for the plate install
Great video. I want to use this video, how can I get your authorization?
@@dpptitanium use away
Thanks for this information...please keep us posted on this setup and how it's working out for you...be safe Brother
I just used ddp plate for my springfield xds mod2. The hellcat plate has the same foot print as the mod 2. Just in case anyone is curious and the mod 2 conwitnesses for those who want to know.
How has she held up since last year? I would love to hear some feedback on the plate as well.
Nice video bro. Love the dpp plate
Do the Trijicon Bright & Tough iron sights cowitness perfectly or does some of the holosun cut into the sight picture?
The Holosun does cut into the sight picture some
Which screws did you use? I notice the DPP plate comes with screws as well as the optic itself.
I used the screws that came with the optic
Did you use the screws that came with the plate or the ones with the optic?
I used the screws that came with the optic
I just bought a Hollison same set up. I was wondering the same thing if you had any issues with the screws that came the optic. I just used the ones they came with the DPP adapter.
I used both, left screw from holosun(longer), right screw from DPP adapter(shorter).
Basis would be comparing the length of the DPP screw in the Optic + DPP adapter plate vs length of the glock screw in the MOS cover Plate.
Hope this helps!
In the process of installing and had the same debacle. So use the optic screws.
Did you get the titanium plate or aluminum plate?
Thanks for the vid, did it stay put after use? Do you still like it?
It did stay put after use and I'm loving it!
How did she shoot? Does the plate affect the fsctory zero of the optic much?
It shot great! Did have to perform some adjustments to get it where I liked it but overall great plate!
@@dabest1eva866 I ended up getting one too and I agree it's really nice.
How much of the front sight can you pick up if any? Thanks
Maybe half or a little more
You need plate even for mos version??!
Depends on the optic your using. The one I’m installing is a Holoson 507K which doesn’t have the footprint that allows it to mount to the Glock 43x MOS without a plate
This could have been a 2 minute video
How’s it holding up? Have you fired rounds?
Yes she is holding up so far. I’ve only been able to put a hundred rounds though. I want to put at least 500 before I place the stamp of approval on it.
@@dabest1eva866 I've just purchased this same set up for My Glock 43x mos...please keep us posted on how it's working for you.
Still holding up?
Yes it is holding up perfect!
Do you have to use torque screw driver?
I just hand tighten mine and tighten it a little bit extra but not too much, it should come with loctite on the screws
I did use a torque wrench just for peace of mind. I got mine from Amazon which wasn't too expensive
No issues with the screws being too long? I heard some people have to grind it down
They are too long have to grind a very little off
No issues with the screws that came with the Holoson
For me I used both, left screw from holosun(longer), right screw from DPP adapter(shorter).
Basis would be comparing the length of the DPP screw in the Optic + DPP adapter plate vs length of the glock screw in the MOS cover Plate.
Hope this helps!
Your mic isn’t working…
What sights?
Here is the link Trijicon Night Sight Sets for Glock Pistols a.co/d/ft6H6TP
Great vid thanks for the content
@@Stone2915 thanks man!
Speak up
I was using my phone too record. Didn't have a microphone hooked up
Better than nothing. Your feedback is valid but I feel like you're delivery is a little harsh.