From the Team: Create Support Fans, and more with manual supports

Поделиться
HTML-код
  • Опубликовано: 4 ноя 2024

Комментарии •

  • @blueckaym
    @blueckaym Год назад +1

    Awesome!

  • @silenttraveler2710
    @silenttraveler2710 3 года назад +3

    Total Awesomeness…

  • @Marcusstratus
    @Marcusstratus 3 года назад +13

    This is great to see the demonstration! Even though I'm familiar with Lychee, I didn't even know about the right-click-on-a-support menu.

  • @JDowzell
    @JDowzell 2 года назад +4

    I had seen people do fan supports a while ago, but never knew how. I actually found this while searching for a different problem, but I'm damn glad I did! This is wonderful to see demonstrated, thank you!

  • @theVariedLife
    @theVariedLife 7 месяцев назад

    Great video. Recently got Lychee Pro for resin printing and your videos are a great way to learn. 5 stars.

  • @scenicplay
    @scenicplay 3 года назад +3

    Damn, this is awesome. I can't believe it's been out since March and I'm just watching it now :0

  • @kurtwall6479
    @kurtwall6479 7 месяцев назад

    Fan supports with the two hotkeys are so easy. I had no idea! Thanks!~

    • @Lychee3d
      @Lychee3d  7 месяцев назад

      Great if you found it useful 🥰

  • @TheSixYardBox
    @TheSixYardBox 2 года назад

    Been trying to work out how to do these fans for months now! Thanks so much

  • @Daemonforce-Gaming
    @Daemonforce-Gaming 3 года назад +3

    Fantastic I'm new to 3d printing and wondered how this was achieved thank you so much

  • @EdgarPaulk
    @EdgarPaulk 3 года назад +4

    Execlent Thomas! Thanks for the video!

  • @JasonJacobsII
    @JasonJacobsII 3 года назад +2

    Very nice, big fan of the mini supports and this just gets easier and easier to do manual supports! Thanks!

  • @stevencrawford7399
    @stevencrawford7399 3 года назад +1

    Well this was fantastic, thank you

  • @cfriedalek
    @cfriedalek 2 года назад

    Can't believe I recognize that voice from ZBrush sculpting streams a few years ago, in particular your awesome 2B sculpt from Nier Automata. I remember them with fondness and learned a lot. Hope your time with Mango3D and Lychee is rewarding. I will definitely give Lychee a try now that I have a resin printer. Cheers.

  • @Emtbtoday
    @Emtbtoday Год назад

    Love to see that printed!.I'm using lychee pro I'm trying to find a way of using less supports on my model's hopefully with testing trial n error there will be a way to cut down on all these supports and the damage reduction from tips

  • @lecoindesmodelistes3741
    @lecoindesmodelistes3741 3 года назад +1

    Super vidéo. Belle démo de la puissance de lychee

  • @ricklynch
    @ricklynch 3 года назад +3

    FANtastic! 😁
    Thank you for this! Great video!
    Could you please do a video showing how to put supports inside a hollowed out model please? Again, great video and thank you! 👍

    • @Lychee3d
      @Lychee3d  3 года назад +4

      OK, let's do that :)

  • @GustavoMuradFerreira
    @GustavoMuradFerreira 3 года назад +1

    Thank you for teaching this! It will be very useful!

  • @lagoondragoon
    @lagoondragoon Год назад

    thanks very nice demo of shortkeys, need to start using those

    • @Lychee3d
      @Lychee3d  Год назад

      We have a lot of hotkeys to do multiple actions. But ALT key it at the center of multiple of these actions, combined with CTRL for mini supports and then Shift for the Continuity mode :)

  • @michaelmarino7216
    @michaelmarino7216 2 года назад

    Thank you very very much for these videos. It is making my purchase of the Professional edition even more useful.

  • @haleg68
    @haleg68 2 года назад

    Exactly the assistance I was looking for. Thanks.

  • @mrgriff9648
    @mrgriff9648 3 года назад +2

    Merci, don't worry about your English its better than most native speakers 😉.

  • @HarleyAssi
    @HarleyAssi 3 года назад +4

    I kinda enjoyed the french accent ^.^
    Thank you for making this video, very helpfull!
    Greetings from the neighborhood (Germany)

    • @HeroOfTheWeb
      @HeroOfTheWeb 3 года назад

      It was rather pleasant. I especially like the word soo-port
      Not hating, I couldn't speak french if my life depended on it.

  • @PaulDominguez
    @PaulDominguez 3 года назад +1

    Very useful feature and good tutorial.

  • @pitbullash
    @pitbullash 3 года назад

    Thank you so much for this guide! :) and btw, your french accent is awesome!

  • @RCMlll
    @RCMlll 3 года назад

    This demo is amazing, you guys rock. Cheers from sunny San Jose, CA!

  • @Revvek
    @Revvek 3 года назад

    More videos please! This was great

  • @Prof.Polymath
    @Prof.Polymath 3 года назад +1

    Great video well explained thank you !!

  • @GuardbrosFieldRadio
    @GuardbrosFieldRadio 3 года назад

    hon hon hon hon thank you my friend

  • @g0balot
    @g0balot 3 года назад +1

    Great to see this. Thanks

  • @alexilex8645
    @alexilex8645 3 года назад

    C'est vraiment intéressant.. et je découvre ça 6 mois après ...

  • @remarkabel174
    @remarkabel174 3 года назад

    Great stuff, great slicer. Keep it up Lychee team!

  • @morgoth62
    @morgoth62 3 года назад

    Awesome. Your video was Tres Bon.

  • @ajlbeer
    @ajlbeer 3 года назад

    Great stuff you guys.

  • @3dzed873
    @3dzed873 3 года назад

    On the Mac Ctrl + Option doesn't work for me. What is the Mac equivalent of these short cut keys?

  • @buddt222
    @buddt222 3 года назад

    Thanks for getting me one step closer to being a lychee master! On another note are you guys going to support the new chituboards like the mars 3?

    • @Lychee3d
      @Lychee3d  3 года назад +2

      If Chitubox company provides a free SDK, yes.

    • @buddt222
      @buddt222 3 года назад

      @@Lychee3d thank you for the reply! So if I wanted to get a new printer, and b didn’t want to use chitubox, what printers can I get?

  • @michaellausier8462
    @michaellausier8462 3 года назад

    Can you help? I own an Elegoo Mars 2 Pro. When I try print with a sliced file from Lychee, I get an error saying "Resolution not compatible" I have Lychee set for my printer and my resin. I don't know how to fix.

  • @CheckingYoutube346
    @CheckingYoutube346 2 года назад

    EllaArt is no longer on Patreon, do you know where she is putting his models now? Thank you!

    • @Lychee3d
      @Lychee3d  2 года назад

      She merged -her- patreon with another one, now under the name of Nomnom Figures. You can find her models on CGTraders

  • @jankybackjack5698
    @jankybackjack5698 3 года назад

    can you select multiple supports at a time. So if I have a failure using medium supports but the placement is correct I can select multiple supports at once and hit heavy one time to change them?

    • @unicyclingistheshit
      @unicyclingistheshit 3 года назад

      if you haven't figured this out already, you can hold shift then click supports to select multiple, then click the "heavy" button on the support menu and this will change the selected supports to heavy

  • @AT-gu8by
    @AT-gu8by 3 года назад

    What do the yellow bits indicate on your model?

  • @kensaiix
    @kensaiix 2 года назад +1

    ei'm a 'uge fan ;-)

  • @uscstaylor
    @uscstaylor 2 года назад

    Awesome

  • @herculeholmes504
    @herculeholmes504 2 года назад

    If anyone else is having the same difficulty I had trying to make mini-supports work: Don't hold down the mouse button when you drag the mini-support! Simples.

  • @TheDrownedEarth
    @TheDrownedEarth 3 года назад

    Ctrl Option on Mac?

  • @pintandominisdejuegos
    @pintandominisdejuegos Год назад

    How do you create the custom supports? it keeps changing automatically in pro

    • @Lychee3d
      @Lychee3d  Год назад

      Please look at some of our latest Shorts vidéo, we show some tips about manual supports. Just add suports by clicking on the Mesh when you are in the Support tool, and while using the ALT key, you can create supports from the model to another support, or adding manual bracing.
      We are working on written documentation for the manual supports creation

  • @ganbarekrissychan
    @ganbarekrissychan 3 года назад

    Can you be my teacher? Your accent is cooooll!

  • @jedisct1
    @jedisct1 3 года назад

    Why doesn't automatic support generation take advantage of mini supports?

  • @remygrandemange8460
    @remygrandemange8460 3 года назад

    Will lychee support spherical support end soon?

    • @Lychee3d
      @Lychee3d  3 года назад +1

      It already support this feature, in the Pro version (Break point slider in the Tips tab)

    • @remygrandemange8460
      @remygrandemange8460 3 года назад

      @@Lychee3d Thanks. I found it thanks to you.
      I'm on pro trial version. I would pay it.
      But I just had other problems :/
      I come on discord to discuss and search if it is a bug or a missmanipulation from me.

    • @Lychee3d
      @Lychee3d  3 года назад +1

      @@remygrandemange8460 yeah, feel free to join ;) We are not always behind the chat, but we do our help to help as much as we can :)

  • @amtechprinters3339
    @amtechprinters3339 3 года назад

    Funny, I think never heard frenglish like that but its ok dont worry 😂👍 Learned much more functions 😲

    • @Lychee3d
      @Lychee3d  3 года назад

      We warn people in our Discord about that ;)

    • @amtechprinters3339
      @amtechprinters3339 3 года назад

      @@Lychee3d Yea, but easier its understand this than only Frensh 😝
      Keep going, maybe add some "preview" at start would be nice where quickly show what functions going to explained?

  • @terrybaileysr.3714
    @terrybaileysr.3714 2 года назад

    Ctrl+ alt? I don't have those. Mac

  • @user-he8qc4mr4i
    @user-he8qc4mr4i Год назад

    what are the shortcuts for mac?

    • @Lychee3d
      @Lychee3d  Год назад

      Option+CTRL to add minis and Option+Shift to switch to Continuity mode

  • @designersmind3140
    @designersmind3140 3 года назад

    Is there no way to have a spherical tip?

    • @Lychee3d
      @Lychee3d  3 года назад +1

      You can have sphere-type tips, in the Pro version, le "Break Point" slider, and its value needs to be higher than the tip value.

    • @designersmind3140
      @designersmind3140 3 года назад

      @@Lychee3d Thanks!

  • @TheSixYardBox
    @TheSixYardBox 2 года назад

    Pressing control at sometimes works sometimes it just creates another support this program is really hard to use and understand. I pay 4poinds a month and it's a huge headache compared to a program that's free!

    • @kensaiix
      @kensaiix 2 года назад

      which one is the free program?

    • @TheSixYardBox
      @TheSixYardBox 2 года назад

      @@kensaiix chitubox but trust me lychee is worth sticking with, it's soooo much better than chitubox! You can get lychee for free hit I pay the extra because it dds a few things you don't get with the free version

    • @kensaiix
      @kensaiix 2 года назад

      @@TheSixYardBox the last post kind of contradicts your first post.
      nonetheless thank you. overall all good now.

    • @TheSixYardBox
      @TheSixYardBox 2 года назад

      @@kensaiix that's because I wrote that reply 4 months ago before I got more experience mate. Context is key. People are allowed to change their opinions last time I checked.

    • @kensaiix
      @kensaiix 2 года назад

      oh...
      yes, indeed.
      sorry, that slipped past me. i din't mean any harm. apologies.

  • @lObOtrOnz
    @lObOtrOnz 2 года назад

    Okay?

  • @blakemoody5866
    @blakemoody5866 Год назад

    PLEASE PLEASE PLEASE remove the need to add a mini support. It should be as simple as holding a hotkey and clicking and the supports automatically connect to the previous full support

    • @Lychee3d
      @Lychee3d  Год назад

      You need to define a starting point at least on the "previous" support you mention. Then it's just a hotkey to connect the others the same way. Or perhaps I didn't understand what you mean ;) (Note: I'm the one who did this video)