Its interesting how they finally revealed how space magic works... so: newtype + psycho frame = anything possible Time travel? Done No more asteroid drop? Done Anything else? Done How? Well because they tap into the fricking after life or something like that... Well space magic I guess
I have the LEDs, they didnt come with any runners. So it would have been weird to have a small tiny runner with a few pieces and the LEDs. They definitelly look amazing in person, especially because you can play around and light up the head first, then the rest of the body. For me, it was worth it, I like LEDs in gunpla.
bazooka's are recoil-less due to the fact that the exhaust just goes out the back of the tube so there is very little force being applied to the bazooka itself. so no barrel recoil is needed
Just bought one. I’m almost sad I just found out about Gundam this late. But this way I have a huge selection of perfect grades and master grades. Gotta look at the positive side.
I love the way he talks about this gundam, especially how he uses his hands to convey his ideas but its almost like he cant keep his hands off the damn thing XD
i think it is good the led unit addons are still on the runner, with a little bit of electronics knowledge you can build a better led system for cheap money.
People don't seem to realize that it's because of the sheer size is why the joints seem weak. If they put in ratchet joints to compensate for the weight, there wouldn't be a problem. Friction joints don't work well with large figures, and the tighter the joint, the high the risk of breakage. Unicorn's friction joints are remarkably good for it's size in PG. The only remedy for the "weak" joints is making them ratchet.
+Alissa MewMew Edit: I feel the shoulder joint started to fall cause you kept fiddling with it. You positioned it awkwardly, and it fell as a result. The first two poses of the shoulder were perfectly fine, but the next example was probably straining the joint.
am i weird that i prefer normal unicorn mode over destroy mode.....\ also, i now have the funny image of someone who has NO IDEA what they are looking at and so is climbing all over the Unicorn and then gets stuck inside the thruster.
I'm a tad late but the plan for the led's was *they were to come with the model* But if you recall one of the reasons why no pg unicorn was it was gonna be too expensive to release it with full led's, and they were right..even then someone with some skill can make due with DIY led's. They aren't they only ones who do this, look at nintendo, selling chargers separately with the new 3ds models, scraping up the savings so the initial price point is affordable while leaving some subtle hints that they might as well finish off the purchase anyway (with little price bumps so extra profit is made *WINK*) You know what though...I canceled my pg unicorn, for 2 good reasons. BANSHEE AND PHENEX That is all ^^
While I see why Bandai released this now, seeing as how Unicorn ended this year, and now's the perfect time to cash in, I really was hoping for a PG Nu Gundam for the past few years. I sure do hope we get one within the next few years.
***** I would love a PG Exia, as it is my favorite mobile suit, but the possibility of one happening is slim to none. There's no real reason to make one at this time. Also, the Nu Gundam isn't much bigger than the Unicorn. Plus, the Nu wouldn't have a transformation to deal with unless they went with the Ver. Ka. The biggest challenge a PG Nu would have is the funnels, and having a stand that could display the funnels deployed.
***** I love Exia to death, but just look at how people reacted to the Transient Gundam and the G-Portent. While G-Portent is based of Sakibure, they showed that Cia used 2 Exia models to make it. When those were unveiled, the gunpla community was just like "Oh look, more Exia". Just look at how many Exia models came out this past year. Including exclusives and figures, we've gotten at least 10 Exias within 12 months, with the Transient Gundam on its way. Let's hope this means we get a PG Exia, since my 1/60 Exia has its share of weight issues.
***** I understand that a PG Exia would be easy money for Bandai. It has multiple variants they could make for it too. There's Exia, Repair, Repair II, Repair III, Avalanche, Avalanche Dash, Trans Am, Astrea, Astrea F Type, Astrea F2 Type, Dark Matter, Amazing, Transient, and probably more too. Repair, RII, RIII, Astrea, and Amazing could all be options sets too. While its easy money for Bandai, I can't see them doing it in the near future.
Hey Kak, you heard about the Hyaku Shiki ver, 2.0 MG announced? I smell a MG Mega Shiki in the future. Also, HGUC Gundam and Guncannon (Revive ver. or ver. 2.0) have been confirmed as well. I feel a good year to come to gunpla.
It probably would have been too expensive to change the molds after they decided not to include the LED unit, or, they did it so they wouldn't have to include a separate frame with the LED unit
All gundams are really fragile, I’ve break some pieces trying to transform and was the perfect grade exia lighting ed, perfect grade banshee and Unicorn 🦄. All of the have gorilla glue.
Very lengthy when you get the LED set. Just really take your time with the kit. I broke the left Chest piece so now I can't really do the Destroy Mode anymore with out the kit looking odd.
it really bothers me when people switch the face as the unicorn face on a destroy mode and destroy mode on a unicorn mode... it really bugs me even they half transform it.. I sound nit pick but unicorn gundam is one of my favorite mobile suits
After seeing reviews of all versions of the Unicorn Gundam, the 1/144 HG,1/100 MG and the 1/60 PG I can conclude that it's a poorly designed MS. the single bolt joints with thick armour looks cool and all, but in terms of mobility, it's not very practical. The limited of articulation on the knees, elbows and feet are comparable to older models that came out in the 90s which is kinda disappointing since this model is a later kit. I was hoping to find some ideas on how to make my 1/144 HG Unicorn model to bend its knee more than 90 degrees, I suppose the design solution Bandai came up with the PG kit is the best one I can find. Thanks for the review.
Can you actually call a model kit that can fully transform poor engineering? Thats masterful man. And not easy. Its either you get a transforming function or more pose options
8:55 the gundam who leapt through time
You're not wrong...
Its interesting how they finally revealed how space magic works... so: newtype + psycho frame = anything possible
Time travel? Done
No more asteroid drop? Done
Anything else? Done
How? Well because they tap into the fricking after life or something like that...
Well space magic I guess
Never give the Unicorn to Kamille, the world will end
I have the LEDs, they didnt come with any runners. So it would have been weird to have a small tiny runner with a few pieces and the LEDs. They definitelly look amazing in person, especially because you can play around and light up the head first, then the rest of the body. For me, it was worth it, I like LEDs in gunpla.
bazooka's are recoil-less due to the fact that the exhaust just goes out the back of the tube so there is very little force being applied to the bazooka itself. so no barrel recoil is needed
mechVixen The hyper bazooka doesn't have a hole at the back
For anyone buying in 2022.Highly recommend the kosmos led kit...way better than the Bandai one and a little cheaper
Just bought one.
I’m almost sad I just found out about Gundam this late.
But this way I have a huge selection of perfect grades and master grades.
Gotta look at the positive side.
I love the way he talks about this gundam, especially how he uses his hands to convey his ideas but its almost like he cant keep his hands off the damn thing XD
Now that this has come out. I must simply wait for my PG RX-93.
Still waitin
Still waiting here
I have the rx 93 ver.ka titanium finish mg it so nice you have to buy it but im waiting for the pg too
Still waiting for Stein
*you guys still waitin'?*
i think it is good the led unit addons are still on the runner, with a little bit of electronics knowledge you can build a better led system for cheap money.
People don't seem to realize that it's because of the sheer size is why the joints seem weak. If they put in ratchet joints to compensate for the weight, there wouldn't be a problem. Friction joints don't work well with large figures, and the tighter the joint, the high the risk of breakage. Unicorn's friction joints are remarkably good for it's size in PG. The only remedy for the "weak" joints is making them ratchet.
+Alissa MewMew Edit: I feel the shoulder joint started to fall cause you kept fiddling with it. You positioned it awkwardly, and it fell as a result. The first two poses of the shoulder were perfectly fine, but the next example was probably straining the joint.
I do like the LED’s but when you consider that they use batteries and switch off after a couple minutes then I don’t think it’s worth it.
The holy grail of PG kits..
I can't believe this video is 6 years old already time flies
am i weird that i prefer normal unicorn mode over destroy mode.....\
also, i now have the funny image of someone who has NO IDEA what they are looking at and so is climbing all over the Unicorn and then gets stuck inside the thruster.
Dude, I also prefer the Unicorn mode. You're not alone. :|
Kiros Bale same here
Kiros Bale same here
+William B (PKMN12) i prefer unicorn mode for the phenex
+William B (PKMN12) Well, it's not like he transformed it properly and his kit looks like shit.
Why ppl keeps saying this kit is Peak Perfect Grade while it looks meh?
I'm a tad late but the plan for the led's was *they were to come with the model*
But if you recall one of the reasons why no pg unicorn was it was gonna be too expensive to release it with full led's, and they were right..even then someone with some skill can make due with DIY led's.
They aren't they only ones who do this, look at nintendo, selling chargers separately with the new 3ds models, scraping up the savings so the initial price point is affordable while leaving some subtle hints that they might as well finish off the purchase anyway (with little price bumps so extra profit is made *WINK*)
You know what though...I canceled my pg unicorn, for 2 good reasons.
BANSHEE AND PHENEX
That is all ^^
now that a few days have passed.. did the super glue trick fix the weight issues caused by the guns/?
You know what would be amazing? PG Sazabi... You wanna know what's even more amazing? PG Sazabi Ver Ka!
Nico Just say that you want a PG Sazabi that is designed by Hajime Katoki....
Using a black small pen paint instead of small paintbrush & small bottle of paint like Tessor product.
While I see why Bandai released this now, seeing as how Unicorn ended this year, and now's the perfect time to cash in, I really was hoping for a PG Nu Gundam for the past few years. I sure do hope we get one within the next few years.
*****
I would love a PG Exia, as it is my favorite mobile suit, but the possibility of one happening is slim to none. There's no real reason to make one at this time. Also, the Nu Gundam isn't much bigger than the Unicorn. Plus, the Nu wouldn't have a transformation to deal with unless they went with the Ver. Ka. The biggest challenge a PG Nu would have is the funnels, and having a stand that could display the funnels deployed.
*****
I love Exia to death, but just look at how people reacted to the Transient Gundam and the G-Portent. While G-Portent is based of Sakibure, they showed that Cia used 2 Exia models to make it. When those were unveiled, the gunpla community was just like "Oh look, more Exia". Just look at how many Exia models came out this past year. Including exclusives and figures, we've gotten at least 10 Exias within 12 months, with the Transient Gundam on its way. Let's hope this means we get a PG Exia, since my 1/60 Exia has its share of weight issues.
*****
I understand that a PG Exia would be easy money for Bandai. It has multiple variants they could make for it too. There's Exia, Repair, Repair II, Repair III, Avalanche, Avalanche Dash, Trans Am, Astrea, Astrea F Type, Astrea F2 Type, Dark Matter, Amazing, Transient, and probably more too. Repair, RII, RIII, Astrea, and Amazing could all be options sets too. While its easy money for Bandai, I can't see them doing it in the near future.
after 8 years they still haven't make it😢
ths aged badly...hope you dd get your PG exia now that its out in 2017 lmao @@MushaGundamMKIII
This model is not for play for limit all moves and flixibility.. It is a model kit
Are you illiterate
Hey Kak, you heard about the Hyaku Shiki ver, 2.0 MG announced? I smell a MG Mega Shiki in the future. Also, HGUC Gundam and Guncannon (Revive ver. or ver. 2.0) have been confirmed as well. I feel a good year to come to gunpla.
+Kakarot197 how long did you build this awesome kit
It probably would have been too expensive to change the molds after they decided not to include the LED unit, or, they did it so they wouldn't have to include a separate frame with the LED unit
is the pg unicorn the same size as A pg nu gundam would be?
I need this! It is incredible that this fig is built from scratch! This is better than most of my lego kits!
where did you find the wing for Gundam Strike ?
really cool video bro....love it to see unicorn PG series. last thing...did u built SD gundam too?
SDs aren't really my thing so I only have a few. I will review the 2 SDs that are part of the Ecopla line though.
nice review kakkacarrotcake
legit tho nice review how much did u pay without the lights?
Perfect Grade Unicorn… ALL THE WAY…
And the Megasize is not stand in a base so the mega is more taller
How tall is the PG Unicorn Destroy Mode including Base stand pls? Height (inches)
you forgot the face
Lights for the unicorns buy 3rd party I’ve spent another $120
I'm thinking of starting a hobby of those but I don't know which to start off with.
deckwiz123 Start with either SD or HG if you plan on going for gunpla.
Good review , I would still prefer their MG Line pretty much everything is good except for the hands, good thing DM includes the static hand set
All gundams are really fragile, I’ve break some pieces trying to transform and was the perfect grade exia lighting ed, perfect grade banshee and Unicorn 🦄. All of the have gorilla glue.
hes not the most expensive but I'm pretty sure add on the LED and the FA and he will be
Do you have the LED Unit?
What's your favorite PG?
What's the stand for it
My first pg looking forward to the build
Has anyone tried using the POM for the shoulder joint in place of the polycap. It might strengthen the joint. Not sure.
the music at the end ?
Tell me. Do I painted and cemented on scale 1/60 Gundam Unicorn or not necessary???
No cement and no paint required. All I did was the panel lining.
How do you do the panel lining?
What brand is this??
Great review.
Moe like fifty shades of gray
He forgot to flip the face
does changing into the destroy mode affect the articulation in any way? especially on the ankles.
no
Yo mine can move a bit in the abs when in destroy mode, did i break it?
In Destroy Mode that is one big PG. It could be biggest PG so far.
Would you say this kit is hard to build or just lengthy
Very lengthy when you get the LED set. Just really take your time with the kit. I broke the left Chest piece so now I can't really do the Destroy Mode anymore with out the kit looking odd.
Double Jointed All the Waaayyyyy
I build MG kits but never Perfect what tools do you need for Perfect kits
A screwdriver, but you need that for some MG kits anyways.
it really bothers me when people switch the face as the unicorn face on a destroy mode and destroy mode on a unicorn mode... it really bugs me even they half transform it.. I sound nit pick but unicorn gundam is one of my favorite mobile suits
Looks good! What about the 1/100 mg Hi Nu gundam ver ka HWS..can't wait for that review kakarot :)
what series is this gundam from?
+Javier de loza Gundam Unicorn.
this is one on the "to get list" =) i have pg 00 raiser and thats a pain in the ass for posing.. its so damn heavy in any aspect =)
Good review...I like all your showings :D More info please! ^^
He forgot to transform the head💀
I know a lot of people will hate me for saying this... but this looks so much better in Unicorn Mode.
Tbh I kinda agree
How tall is the gundam
Robert Robbie my banshee is like 16” tall
Unchained mode, is it just me, or does it kind of look like a face in the torso? Eyes on the chest, and the crotch forms the mouth.
After seeing reviews of all versions of the Unicorn Gundam, the 1/144 HG,1/100 MG and the 1/60 PG I can conclude that it's a poorly designed MS. the single bolt joints with thick armour looks cool and all, but in terms of mobility, it's not very practical. The limited of articulation on the knees, elbows and feet are comparable to older models that came out in the 90s which is kinda disappointing since this model is a later kit. I was hoping to find some ideas on how to make my 1/144 HG Unicorn model to bend its knee more than 90 degrees, I suppose the design solution Bandai came up with the PG kit is the best one I can find. Thanks for the review.
Can you actually call a model kit that can fully transform poor engineering? Thats masterful man. And not easy. Its either you get a transforming function or more pose options
Hi I'm from the future, the RG unicorn is lit af
you forget to change those eyes for the destroy mode
is this a perfect grade?
no, this is perfect grade unicorn!!!
Buddy.
It literally says PG on the title...
He even says PG during the review...multiple...times...
Does the cockpit hatch open?
Im 4 years late but yes
Daban leds $60 each
If i get that thing inside of my house my death is garanteed -.- Its too big!
*****
death sentence too
I can't decide if he has a british or american accent. But anyway, great video dude
It sounds like English isn't his first language, but he sounds like he learned English in the UK.
you should do another take for the gun instead of holding it up all at once and shoving it front of the camera
also less hand
Panel lining?
The black lines.
not too shabby
cuz they want you to buy it.
Eey kakarot ma man,... How to find you on FB? I want to find u on i duno you name yaw.. i want too see you on fb yaw...
There's a link to it on mah Utube page brah.
***** you aight brah... not bad at all....
武器を持ったときの手首の保持力はなんとかしてほしいよね。
i like your other youtube chanel. the one with finger puppets.
How rich are you to not think twice about buying this shit
dont need to be rich...hobbies do this to you lol
I is going to get this set
Super expensive hobby, plus buying the weapons kit for all of them I’ve spent $1,380 usd.
do hi nu gundam ver ka
your panel lining is insulting
Why?
Pg sazabi anyone?
***** saynenjew
You don't really need the NORN versions of the Banshee because it can transform
***** I would love it if they released recoloured Banshee parts for the Unicorn so you could make the Gundam Unicorn Full Armour Plan-B.
almost 400 likes
Hands man. no hands unless needed to move or show a piece... you already convey your emotions by voice. Very distracting to not say annoying.
tolong bahasa indonesia dunk wkwkwkwkw
bego lu
+Kavin Ziyanulhaq tai lu hahaha
temmy surya yakali broo
belajar gih
not too shabby
not too shabby