Great vid! Longtime viewer! Ive been street tuning my sons .020” over Vitara/Speedfactory no-notch long-rod D16Y8 setup. His car is a 99 EK4DRLX. It has an old skool og GreddY sohc turbo kit!…i had the turbo rebuilt. It’s got a comp 105300 camshaft, BC springs/retainers, a block guard, arp head studs, Kteller DwnPipe, S300V3, Flexfuel, MAC valve. Ethanol usually runs around E67. Boost around 12psi. Inefficient exhaust manifolds and turbine housings can kill your top end. I’ve been fighting a similar issue with my sons Greddy setup. It utilizes a Mitsubishi TD05H-15G turbocharger that has a very restrictive wastegate housing to clear the a/c compressor. The car feels great all the way to about 6,800rpm then just goes flat. It still “pulls” but with less enthusiasm. Air fuels look great; mid 11s. Right now the 12psi ignition timing = 11.5*@6K, 12.5*@6.5K, 14.25*@7K. Seems conservative to me. Anymore timing and it’ll try to push coolant. Cam gear changes don’t seem to help either. I’m almost positive that I’ve run into that exhaust “wall”. Time to upgrade! Side note: my son came home from the hospital almost 20yrs ago in the backseat of his mom’s boosted EG 4DR D16Z6 AUTOMATIC! He and his sister rode in the back of that car for the first ~ 7yrs of their lives! He’s now driving around in his own EK4DR with that exact same turbo kit!
@@tayvonrose2528 Probably everything you mentioned. Cast log manifolds are the worse. Turbine a/r under ~.63 will also limit top end power. And you can’t go wrong with a larger downpipe.
I like both kinds of videos. The dyno and this. The way you tune is super efficient and love seeing it in action. Also like seeing customer cars too. Only thing I would add back is some more street stuff. Maybe 2 or 3 a month. Nothin crazy. But those got super huge view counts
These kinda videos are always so good. Thankbyou for going over timing maps again. Idk why tuners never wanna review the timing maps. I know every engine is different but there's obviously a basis where you can start along which direction to take for whatever engine.
Much respect for you taking the time to walk thru those maps with everyone. This will be a great comparison for ppl to see the difference between cheap slapped together stuff vs a properly laid out kit. Would also be interesting to see the Garrett against a VS on the new setup. Your absolutely correct, that setup would be a good lil street ripper but after you had and seen the capability of better setup it's just not gonna excite you. Thanks for sharing.
With winter coming, you're less likely to be out in the sun. Start taking some vitamin D. It'll help with your mood and make you just feel a ton better. Winter is depressing enough but it's something small you can do everyday to help out. You can also buy like a vitamin D lamp too for at home when you're chilling watching TV or whatever. That out of the way. I wanted to ask, is your dyno able to do steady state? If not, is that something you wish you had as a tuner? I've heard it is a really good tool for timing if you're also using an audio knock monitor. I've never tuned but I'm extremely interested in it and want to learn everything about it.
Love these detailed tuning videos! This little EF is bout to be a ripper! I have a bit of road rage myself and hate being tail gated. Also the Facebook page for selling parts would be a killer idea and would make you more money! Keep kickin ass Hunter! 🤘
Dude your videos are so helpful ! No one else explains anything about a basic starting point for for igntion timing on s300. Obviously timing is very different with ethanol but like a past video you put 26 degrees when you start getting into boost then taper it out as the boost builds. If it was pump gas would a good place to start be 28 degrees? I know there are tons of variables between builds and also that ignition tuning should mainly be done on a dyno to actually see whats happening but im curious where the best conservative starting point is for a turbo honda on pump when setting up a base map to drive around on till you hit the dyno.
I seriously appreciate these videos man I’m almost done with my b20 turbo CRV build and I’m gonna be tuning it myself and your videos just help soooo much man like I know how you say you think there long winded in the video but not at all man, all the stuff your saying is helpful and withought you I garentee my car wouldn’t have a fighting chance I could watch your hondata Smanager tuning videos for hrs 🙌🏻🙌🏻🙏🏻🙏🏻🙏🏻
Hey great video Hunter thank you for the ignition tuning tips you don't have to give every detail but you drop some golden nuggets of information every time you talk about it 💪😎
So happy to see the progress on the EF! Keep killing it bro. Can’t believe how close your street tune was and I think it that video you estimated 250hp just from driving it. Those cams are probably worse than stock,no?
Its bubba with the slow GSR all motor...thats exactly what my gsr was doing... It wasnt all the time either..we found broken pins on the data port connection to the board..soldered them right to the board with single pieces of wire.. never had an issue again
I totally agree about end of the video I'm in Colorado and that shit happens here all the time people are absolute idiots in the snow it's gotten so much worse in last few years. Inconsiderate no reguard for others on the road idk but yeah seen ag least 10 crashes in last month half 2 of which happend in fron and behind me. Anyway great content Hunter keep up your videos have definitely helped me so much within last year or more from fuel pump to the lsd instal in my trans to wideband and the HTS introduction video to get mr tuning and now tuning my car and finished my f20b stroker build and its tuned somewhat good need dyno but here I am year or so later tuning my shit thanks you and maybe few others. But anyway I think for sale page be great idea keep it up wish I was closer so can have you dyno my turbo build been working in for over 4 years think you'd like it!
if not valve float maybe it’s just choking on the log manifold? it did spit a bunch of black smoke out so maybe a fuel issue? i’m not sure you’re the tuner not me, but i definitely enjoy watching you diagnose and run through the car!
Hunter, when your running into this problem where you got a cam too big on a vtec engine. Give it a try just running the engine out of vtec for the whole range. Obviously we want vtec to work. But if the extra air is hurting the performance, give it a try without it until you can fix the back pressure problem. We notice on your graph raising the vtec higher and higher keeps increasing the efficiency of the engine.
Definitely loved the ignition part indeed that's the next thing I really need to learn more about definitely 1up for that would like see more of in future if you feel like it
I think the larger bore size on an LS compared to the smaller diameter on a b series has a lot to do with the timing the engine desires... Flame has more room to travel
What about on chump gas timing 2 deg lower ? To start I have conservative now but feel like I can give it some more. I’m gonna be getting some of your injectors and going over to e soon but until then
It's a vw scirocco 85ish radiator, I have the same one 😂, definitely need more video's like this, any suggestions on intercoolers for EF civics, I'm in a CRX extremely happy with my build and how it is coming out but run the same intercooler bc I can't get anything else to fit
Im always learning something by watching your videos!!! My lsvtec turbo started pushing out coolant @19 psi. Do you think i can get by with just a new headgasket? Its a je pro seal headgasket that's in it.
Im runnung 13-14 timing at 7 psi on my 2007 Honda Civic base model R18 engine. Same timing as a basemap on hondata for turbo. Runs well. Would you reccomend going more boost same timing or same boost and more timing?
Where you located in Wisconsin? I’m in Milwaukee and trying to find someone to retune my setup. Plugged in to the laptop and the file for my tune got corrupted and I have no back up.
Your message at the end of video. Its cool to see u talking about this. Your a entertainer your video gets out to all kinds of audiences. Using your power to try to make it safer is really admirable and respectful. Also i watch alot of young static he seems to post videos when i wake up :). Hearing u speak positive about him and his sidekick leo is also admirable. Good video, liked it too
I can not stand ppl who tailgate!! I have a 30” x 25” decal on the back of my Ranger tailgate that says “GET OFF MY ASS” I’ve seen another good decal that said “you should have left earlier.” lol I installed 4 large train horns concealed under the rear bumper cover from Hornblasters in my project Civic. Compressor and the tank are under the left side of the car. You don’t know it’s there. 149 db and yes, it sounds exactly like a train. Go ahead, cut me off MFr. This shit scares ppl when they are ready to hear them.
You don't talk too much, your videos are really good. Thanks for all the help.
I love waking up to a hunter video😁
Great vid! Longtime viewer! Ive been street tuning my sons .020” over Vitara/Speedfactory no-notch long-rod D16Y8 setup. His car is a 99 EK4DRLX. It has an old skool og GreddY sohc turbo kit!…i had the turbo rebuilt. It’s got a comp 105300 camshaft, BC springs/retainers, a block guard, arp head studs, Kteller DwnPipe, S300V3, Flexfuel, MAC valve. Ethanol usually runs around E67. Boost around 12psi.
Inefficient exhaust manifolds and turbine housings can kill your top end. I’ve been fighting a similar issue with my sons Greddy setup. It utilizes a Mitsubishi TD05H-15G turbocharger that has a very restrictive wastegate housing to clear the a/c compressor. The car feels great all the way to about 6,800rpm then just goes flat. It still “pulls” but with less enthusiasm. Air fuels look great; mid 11s. Right now the 12psi ignition timing = 11.5*@6K, 12.5*@6.5K, 14.25*@7K. Seems conservative to me. Anymore timing and it’ll try to push coolant. Cam gear changes don’t seem to help either.
I’m almost positive that I’ve run into that exhaust “wall”. Time to upgrade!
Side note: my son came home from the hospital almost 20yrs ago in the backseat of his mom’s boosted EG 4DR D16Z6 AUTOMATIC! He and his sister rode in the back of that car for the first ~ 7yrs of their lives! He’s now driving around in his own EK4DR with that exact same turbo kit!
Sounds like me and ur son are going for a similar setup. Do you think the exhaust wall is due to the cast log manifold, turbine A/R or downpipe size.
@@tayvonrose2528 Probably everything you mentioned. Cast log manifolds are the worse. Turbine a/r under ~.63 will also limit top end power. And you can’t go wrong with a larger downpipe.
I got the same Greddy kit and I'm at 20 timing at 10 psi. You need to turn it up! Replace the head gasket and let her eat!
These are the videos that are golden
I appreciate the timing help there not a lot of info out there thanks Hunter, I’m going try it on my set up later
You did a Hunter video like only Hunter could and I love it! Knowledge and rants go together like burgers and fries. Please keep them coming!
I like both kinds of videos. The dyno and this. The way you tune is super efficient and love seeing it in action. Also like seeing customer cars too. Only thing I would add back is some more street stuff. Maybe 2 or 3 a month. Nothin crazy. But those got super huge view counts
These kinda videos are always so good. Thankbyou for going over timing maps again. Idk why tuners never wanna review the timing maps. I know every engine is different but there's obviously a basis where you can start along which direction to take for whatever engine.
Made it all the way to the end 💪🏽💪🏽
Much respect for you taking the time to walk thru those maps with everyone.
This will be a great comparison for ppl to see the difference between cheap slapped together stuff vs a properly laid out kit. Would also be interesting to see the Garrett against a VS on the new setup. Your absolutely correct, that setup would be a good lil street ripper but after you had and seen the capability of better setup it's just not gonna excite you.
Thanks for sharing.
Favorite kind of video! Thanks for the great information. Keep pushing!
With winter coming, you're less likely to be out in the sun. Start taking some vitamin D. It'll help with your mood and make you just feel a ton better. Winter is depressing enough but it's something small you can do everyday to help out. You can also buy like a vitamin D lamp too for at home when you're chilling watching TV or whatever.
That out of the way. I wanted to ask, is your dyno able to do steady state? If not, is that something you wish you had as a tuner? I've heard it is a really good tool for timing if you're also using an audio knock monitor. I've never tuned but I'm extremely interested in it and want to learn everything about it.
Love these detailed tuning videos! This little EF is bout to be a ripper! I have a bit of road rage myself and hate being tail gated. Also the Facebook page for selling parts would be a killer idea and would make you more money! Keep kickin ass Hunter! 🤘
I likecthe details as well. They never say enough. I like to know all the build specs, fuel pump, fuel line size, cams....etc.
@@jimhiscott2918 same here
Dude your videos are so helpful ! No one else explains anything about a basic starting point for for igntion timing on s300. Obviously timing is very different with ethanol but like a past video you put 26 degrees when you start getting into boost then taper it out as the boost builds. If it was pump gas would a good place to start be 28 degrees? I know there are tons of variables between builds and also that ignition tuning should mainly be done on a dyno to actually see whats happening but im curious where the best conservative starting point is for a turbo honda on pump when setting up a base map to drive around on till you hit the dyno.
I seriously appreciate these videos man I’m almost done with my b20 turbo CRV build and I’m gonna be tuning it myself and your videos just help soooo much man like I know how you say you think there long winded in the video but not at all man, all the stuff your saying is helpful and withought you I garentee my car wouldn’t have a fighting chance I could watch your hondata Smanager tuning videos for hrs 🙌🏻🙌🏻🙏🏻🙏🏻🙏🏻
Hey great video Hunter thank you for the ignition tuning tips you don't have to give every detail but you drop some golden nuggets of information every time you talk about it 💪😎
I’ve been waiting for you to make a video like this! Good job!
About time you play with the EF hatch 😆more rants and stay positive can't wait for the m1 tune on your integra and the new kit on the EF.
You're the bomb dude. Keep doing the things you do
I enjoyed timming talk with hunter!
So happy to see the progress on the EF! Keep killing it bro. Can’t believe how close your street tune was and I think it that video you estimated 250hp just from driving it. Those cams are probably worse than stock,no?
Its bubba with the slow GSR all motor...thats exactly what my gsr was doing... It wasnt all the time either..we found broken pins on the data port connection to the board..soldered them right to the board with single pieces of wire.. never had an issue again
Great video. Thanks for the upload Hunter.
I totally agree about end of the video I'm in Colorado and that shit happens here all the time people are absolute idiots in the snow it's gotten so much worse in last few years. Inconsiderate no reguard for others on the road idk but yeah seen ag least 10 crashes in last month half 2 of which happend in fron and behind me. Anyway great content Hunter keep up your videos have definitely helped me so much within last year or more from fuel pump to the lsd instal in my trans to wideband and the HTS introduction video to get mr tuning and now tuning my car and finished my f20b stroker build and its tuned somewhat good need dyno but here I am year or so later tuning my shit thanks you and maybe few others. But anyway I think for sale page be great idea keep it up wish I was closer so can have you dyno my turbo build been working in for over 4 years think you'd like it!
Its the log manifold choking the hell out of it
Might be hitting you up soon around February to work on my car, I'm out of the mke area.
if not valve float maybe it’s just choking on the log manifold? it did spit a bunch of black smoke out so maybe a fuel issue? i’m not sure you’re the tuner not me, but i definitely enjoy watching you diagnose and run through the car!
Love B series motors, I would throw GSR or ITR Cams in it. Can't go wrong with OEM and they're proven history wise to work great with Turbos.
dang the beard has come a long ways. But so have you.
49th from the UK.
Good knowledge drop on timing. Entertaining as always. 🤙🏻
Another tuning lesson thank you sir.
Yeah man we def love the content keep pushing
My two guesses would be igniter dying since it goes flat on the data log, or reversion from those cams
I'd be interested in the old spooly boi, sounds great for a built single jingle.
In summation: slow is smooth and smooth is fast.
Hunter, when your running into this problem where you got a cam too big on a vtec engine. Give it a try just running the engine out of vtec for the whole range. Obviously we want vtec to work. But if the extra air is hurting the performance, give it a try without it until you can fix the back pressure problem. We notice on your graph raising the vtec higher and higher keeps increasing the efficiency of the engine.
Good video bro very informative on stuff. Helps us all out to learn more stuff
For a guy from Wisconsin you sound real Canadian
Definitely loved the ignition part indeed that's the next thing I really need to learn more about definitely 1up for that would like see more of in future if you feel like it
Heck yeah cool to see the whip alive 😎 I need a set of those injectors for my b20v I'm building wanna run it on corn
Nice vid, make another one of the continue of this built.
Love the video , I got a N/A b20 high comp with intake and exhaust , I'd like to kno around how much max timing to run pls
I think the larger bore size on an LS compared to the smaller diameter on a b series has a lot to do with the timing the engine desires... Flame has more room to travel
Thank you for good info
Try lowering the boost and srill spin the motor up to 8000. See if it does the same thing?
Looking forward to more vids
Awesome 👌
How would you compare b18 timing to D16y8 or d16Z6 timing?
What about on chump gas timing 2 deg lower ? To start I have conservative now but feel like I can give it some more. I’m gonna be getting some of your injectors and going over to e soon but until then
It's a vw scirocco 85ish radiator, I have the same one 😂, definitely need more video's like this, any suggestions on intercoolers for EF civics, I'm in a CRX extremely happy with my build and how it is coming out but run the same intercooler bc I can't get anything else to fit
You should do a series called what grind Hunters gears and just rant on it I'll watch it
Im always learning something by watching your videos!!! My lsvtec turbo started pushing out coolant @19 psi. Do you think i can get by with just a new headgasket? Its a je pro seal headgasket that's in it.
I would get some head studs
Thank you hunter for the great info.would love to see you tune my car lol but I live in Pennsylvania lol
Im runnung 13-14 timing at 7 psi on my 2007 Honda Civic base model R18 engine. Same timing as a basemap on hondata for turbo. Runs well. Would you reccomend going more boost same timing or same boost and more timing?
Dude I could make a hole RUclips channel on fondulac drivers. Holy bud. People doing 90 in the snow..
40:43 very well said! having a scattered brain really messes with your thought process
Now do a timing video for SOHC D16!
Where you located in Wisconsin? I’m in Milwaukee and trying to find someone to retune my setup. Plugged in to the laptop and the file for my tune got corrupted and I have no back up.
I love all of the engine bay vented wastegates on these honda's haha
The back pressure is hurting the head gasket with all the pressure.
I didn't know that too much fuel pressure would cause the injectors to malfunction. And Im only 2 mins in.
U have a funny accent. I bet my accent is funny to u too. Laughing is a great feeling.
Your message at the end of video. Its cool to see u talking about this. Your a entertainer your video gets out to all kinds of audiences. Using your power to try to make it safer is really admirable and respectful. Also i watch alot of young static he seems to post videos when i wake up :). Hearing u speak positive about him and his sidekick leo is also admirable. Good video, liked it too
Thanks man! This is great info. Love the in-depth tuning vids.
💪😎🔥🔥
Injectors seam to like 58 psi for sure
Does this work well on h series.
First yheaaaaaa brother
I can not stand ppl who tailgate!! I have a 30” x 25” decal on the back of my Ranger tailgate that says “GET OFF MY ASS”
I’ve seen another good decal that said “you should have left earlier.” lol
I installed 4 large train horns concealed under the rear bumper cover from Hornblasters in my project Civic. Compressor and the tank are under the left side of the car. You don’t know it’s there. 149 db and yes, it sounds exactly like a train. Go ahead, cut me off MFr. This shit scares ppl when they are ready to hear them.
what kind of distributor
Mostplus stock replacement
Turbo leaning out on oil?
That timing map is a damn mess.