While cleaning the bobbin area of my Crown Jewel during a bobbin refill I vacuumed out the lint, there was some lint remaining I used my canned air. To my surprise the red tube from the canned air blew off into the inside of my machine. How do I get the tube out? I am afraid to finish my quilt until it is out.
Thanks for the video. Very helpful. Should I be able to raise the presser bar with my hand when changing presser feet to help get them in place? I have seen videos of longarm machines you can lightly lift the presser bar with you hand. Mine doesn't move if I try to raise it manually a bit to slide a foot like the Glide 2 in place. Just wondering if that is available on the Cornet. thanks
Hi Yolanda, thank you for reaching out to us. The manual states not to apply oil to the bobbin case. Any oiling for your particular machine needs to be taken care of through an authorized Baby Lock retailer.
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
Loved this video! Super informative
Great tips! Thank you Doug.
Is there a video on how to adjust or replace tires on your encoder on a Coronet ?
Please reach out to our consumer support hotline: 1-800-313-4110 or email at productsupport@babylock.com
While cleaning the bobbin area of my Crown Jewel during a bobbin refill I vacuumed out the lint, there was some lint remaining I used my canned air. To my surprise the red tube from the canned air blew off into the inside of my machine. How do I get the tube out? I am afraid to finish my quilt until it is out.
Thank you Doug! Great job.....
Thanks for the video. Very helpful. Should I be able to raise the presser bar with my hand when changing presser feet to help get them in place? I have seen videos of longarm machines you can lightly lift the presser bar with you hand. Mine doesn't move if I try to raise it manually a bit to slide a foot like the Glide 2 in place. Just wondering if that is available on the Cornet. thanks
It’s easiest to rotate your hand wheel backward a bit, to place the needle and foot at its highest. We hope this helps.
Great help! Thanks so much!
Thanks, Doug. This a very timely video. I haven’t sewn on my Coronet for some time.
I just bought a Babylock Gallant! My hopping foot doesn't hop! Do I need to take it in for repair?
I see that you have a computer attached to the top of your Cornet. Is this for using purchased quilting designs? Thank you Doug for the great video!
How do you adjust the hook timing on the Coronet?
Were do you get the oil? I have a Baby lock Sofa sewing machine.
Hi Yolanda, thank you for reaching out to us. The manual states not to apply oil to the bobbin case. Any oiling for your particular machine needs to be taken care of through an authorized Baby Lock retailer.
I cant get my oil to come out of long spout
Very helpful! Thank you 🙏