Top Tips for installing Fire-door linings
HTML-код
- Опубликовано: 2 окт 2024
- Here is the kit I use:
Bosch Professional Combi Drill and Impact Driver with Two 18V 4.0 Ah Batteries amzn.to/2owE0mK
Bosch Professional 18V Cordless Circular Saw with 2 x 18 V 5.0 Ah Batteries
amzn.to/2IGTwDv
Bosch Professional 18V Cordless Multi-Cutter with 2 x 18 V 5 Ah Batteries and 16 Accessories
amzn.to/2AYPOAM
Bosch Professional 18V Cordless Jigsaw with 2 x 18 V 5.0 Ah Batteries
amzn.to/2IDgTxA
Bosch Professional GAS 35 M AFC Wet/Dry Extractor
amzn.to/2p5iPbj
Bosch Professional GMF 1600 CE Corded 240V Multi-Function Router
amzn.to/35komvb
Occidental Leather 5089 LG Seven Bag Framer Tool Belt
amzn.to/2OAjlc4
Occidental Leather 5355 Stronghold Comfort Package
amzn.to/2VuRF9U
Hikoki Nail Gun
rover.ebay.com...
Bosch Table Saw & leg stand
rover.ebay.com...
Damp Proof Membrane
rover.ebay.com...
18mm Chipboard Flooring
rover.ebay.com...
Great to see you back.
Let the good times roll 😌 👌
Cheers!
Yessss so glad you are back!
Cheers dude!
Nice to see you back. More great content.
Cheers mate! Thanks for coming back to watch
Great to see you back mate. More progress to your stunning home!
Thanks mate, appreciate the support!
Missed your videos lad ! Hope you and family are well
Just a question on when you said the intumescent strip needs to be on the fire side. That’s fine when the door opens into the garage however if there is a step down into the garage the door needs to pull towards you as there is a step / trip hazard. The strip is then not on the fire side, but I can see the logic for both , not sure if there is a right or wrong ?
Hmmm good point - honestly not sure...it's conventional for doors to open into a room, so that you aren't having to walk backwards before walking forwards into a room, so I just followed that 🤔
Top notch Sir, 👍 really nice work, 🔨 🇮🇪
Cheers mate! Nice to hear from you again 💪
@@OfficeBoyBuilder Your welcome, those architraves are beautiful ❤️ Nice and wide, the satin white really makes those oak doors pop, 👍 🔨 🇮🇪
I thought you finished your house and gave up on youtube 😂🤣
Lol not even close mate, I just ran out of time and money...🤣🙈
@@OfficeBoyBuilder Oh no! Looking forward to your upcoming vids.
How much is it cost to do a fire door in a flat in central London?
What are the best nails to use so they're less visable or does it not matter?
It's less important - what you're better off doing is getting a good nail punch and being diligent with sinking the nails deeper below the surface of the wood, and then filling/sanding/painting.
I know people like Robin Clevet like to use screws instead so that he can remove the door lining if he wants to, but I've never had to do that.
Nice to see you back Budd!!👍😎 The job you are doing around your home is 1st class keep up the great work cannot wait to see your vidoes/vlogs in the coming weeks 👏💯%👍
Cheers mate! I had to take a fairly hefty break to keep the quality high. Thanks for the love!
Just wondering if you can use these internal fire doors as apartment front doors
Yes you probably can. But you might not want to, given that they're not designed for security in the same way that a "proper" front door is.
Great finish mate. Best place to order doors from?
Cheers!
I really like Leaderdoors.com - I found their prices good, and although delivery can be a little slow occasionally, the delivery people are careful with the doors to make sure they arrive in good condition.
@@OfficeBoyBuilder many thanks mate. Will check them out! Keep up the videos please! Loved this series so far.
What doors in the house had to be changed to fire doors…. Did all the bedrooms have to be changed??
Yes, all the bedroom and living room doors need to be changed to fire doors.
The only way around changing them is to install a sprinkler system in every room!
superb info and finish
Where you been mate. We were left hanging to see how your renovation ended up.
I'm still chipping away at it! Ran out of time and money so had to hit the office work again to pay for it all 😂
Beautiful job, I really like the architecture.
Can I ask, you obviously had to interrupt the fire seal when you cut in the hinges and lock receiver.
Is that a worry for a fire door?
Good question, and the answer is "no" because we used grade 13 fire hinges...! Otherwise it can be an issue
Very helpful thanks
Great video mate. I wasn’t sure if you had to have a threshold for fire doors in the bottom ? Also did you have to put fire doors on your other doors upstairs due to the loft ? I’ve got to annoyingly. I used to be so jealous of your videos as I couldn’t wait to be at this stage. I’m glad to say I’m finally getting there ! Just finished all the walls for the rooms. Now onto first fix and then plasterboard 😅
We need to install fire doors throughout the entire house! Oddly they don't all need to have fire door linings, only the way into the garage and I put one on the doorway into the kitchen, but I don't think that was strictly necessary. All the doors (and hinges!) into bedrooms need to be fire rated too, but no need to change the linings.
Congrats on getting so far with it. Keep up an even pace if you can. "Don't grow weary while doing good!"
Where abouts in the country are you town/county.
A lot of fire door requirements by your Local authority???
Anyone know where these hinges are from please (self close ) good vid installing one next week 😬
I simply found them on Amazon or eBay...look for sprung hinges
In a HMO, would the fire side be the room or the hallway containing kitchen ?
I believe it's the kitchen side, as that's where a fire is most likely to originate. However I believe fire regs are there for the whole door on both sides, so it's about the entire unit rather than just one side of it.
I always fit my door stop after the doors hung and leave 1mm gap for painting
Yeah I think that's a better method - that's what I've done on the recent doors I have hung and I think it works easier!
Thanks for the tip.
Can I ask what carpet/underlay combo you went for ? Give it much thought?
I went for the second nicest underlay they had on offer, and then the plushest feeling carpet I could get my hands on 🤣 it's super sumptuous in there, and designed as a place to sink your toes into...that's about as far as I thought it through, because the complexities around different carpet weaves was just too much for my mind 🤯
Where the hell have you been? I was about to send out a team of Sherpas, with a davey lamp and a fuppin canary!
Had to pace myself! 🤣
I was like a smack head on giro day! Glad you’re back!
Where can I get those hinges?
amzn.to/3TSFoua
These are good!
Pleased to see you back on here and again well explained
Cheers mate!
Lovely to see you back and uploading mate! And as always thanks for sharing these top tips 👍
Cheers mate! Thanks for coming back on to watch after my time off 😍
Cheers mate! Thanks for coming back on to watch after my time off 😍
Nice to have you back
Cheers mate!
Cheers mate!
Did you read the door fire certificate?
I feel like this question is a trap...I bought a 30 minute fire door and installed it on a 30 minute fire door frame, using grade 13 hinges. As I understand it, that's sufficient for the building inspector to sign off...?
@@OfficeBoyBuilder it's not a trap question mate. How do I message you privately on RUclips?
@OfficeBoyBuilder Looks like RUclips disabled that feature. Building Control would possibly sign it off as they have limited knowledge and it's a domestic property. On top of the door there should be a label with a certificate number. If you go on Deanta's website you should be able to find it there. It will advise of what your frame material can be and dimensions, what hinges and locks are allowed, the positions they should be, the size of the intumescent seal and the maximum gaps permitted around the frames. I do this for living and enjoy your channel. Just double check your set up against this. If you need any assistance let me know.
Thanks mate, really appreciate your time on this, there is a little reflective sticker on the tops of the doors. I will definitely check the website
@@mattpickett2391 @officeboybuilder there's not a chance this door is compliant
U showed us nothing, whata waste