Burying Caterpillar 637 Scrapers
HTML-код
- Опубликовано: 28 авг 2024
- Installing some cylinders, welding steering pins and the turbo shows up for the 3306, then I do some yard drying and dig a hole with the D9 to put scrapers in
Want to write me?
Anderson Construction
858 West 100 South
Blackfoot ID 83221
Music: www.audioblock... Type: Music
BPM: 108
Duration: 02:04
Artist: Chuck Hughes
Pro: ASCAP
Publisher: Soundscape Audioworks
Publisher PRO: SOCAN
For Hats and Calendar's GO HERE----->www.jpaydirt.com/
Check this out----->instagram.com/jpaydirt/
Old Kenny Coloring Books-------->www.amazon.com/Old-Kenny-Semi-Truck-Coloring-Book/dp/1724398199/ref=sr_1_1?ie=UTF8&qid=1533523771&sr=8-1&keywords=old+kenny+coloring+book
LOOK------->facebook.com/Jpaydirt/
when do we get to see a history of Old Kenny?
Stainless rod with a torch weld it up I've had some pretty good luck
I spent years working on that yellow stuff. The main biggest lesson my mentors taught me was "Never stick your fingers in a hole" I had an ejector plate cylinder slip on me once and cut a 3/4" punch I was using to line it up with into three pieces. I took that moto as a life lesson. I like your videos they remind me of my youth and start of my career.
Dan, not all holes are bad places to stick fingers☻
@@Jpaydirt but only one type will cost you money ....
My weekly video fix thanks Jeff i would like a tour of your yard(on video) to see everything you have new and used have a great week
Maybe that's why my old KW won't start cold, gotta remember to pump the pedal to the diesel carburetor !!! Thanks for the vid Mr. Anderson!
You earned the right to have a big head. Excellent video Jeff.
Good evening Jeff, you are putting a lot of work into the scrapers. It must be a very important job you've got lined up. Take care my friend and catch you next 👍😎🇬🇧.
Thanks for helping with my JPAY DIRT addiction!
Nice footage! Always enjoy seeing the work on the 637's. Git all them leaks fixed.
AWESOME #7 🥃 LOTS of IRONS in the fire....🔥🔥🔥🛠🛠🤑🤑 THANKS FOR THE UPDATE JEFF !!!👍 AWESOME ENGINEERING on the pin locks and rebuild... (GOOD FOR ANOTHER 40 YEARS)
THANKS FOR THE UPDATE.... 😍😍😍😍😍
Mr. Paydirt, found your channel not long ago and I love it! Watched lots of your vids, you do a wonderful job, thank you. I like seeing your dog, my wife and son and I have 5 German Shepherds (and 1beagle) so always enjoy seeing other people spending time in the shop with furry helpers.
I really enjoy your videos. I also love seeing the Idaho scenery. I grew up in Moscow but left to join the Navy. I'm in Bremerton, Washington now still working for the Navy but no longer IN the Navy. Anyhow, I can't wait to get back to Idaho. Thanks for the entertainment.
The dog sure doesn't want to miss out on anything!
My luck...After replacing all the lines, it would not drip a single drop for 2 months. Unload it at the jobsite and it will look like a water balloon after a fight with a rabid porcupine! AWESOME video Jpaydirt! Have a great weekend...
Very descriptive wayne
Great details and good maintenance on that equipment. Back in the early 80's I operated a 920 loader and greasing it was a chore and the worst thing was the grease! Find a good grease and ask to order more and get crap in return. The zerts would clog up and we'll you know the drill.
Can't wait to hear you fire up that engine and hear how good it sounds.
Be safe and thanks for a great video.👍👍👍👍
@1:00 ...and TODAY we find Gearmo out in the field preforming....
on w da movie folks...
Helium speak...😏
That piston is a nonconformist. ( tries runnin)
Love the guitar in that song...😏
Great video, thx.
Thank you Jeff for another great video, you have a l lot of repaired done with some more to go, good luck.
Friday evenings and a new Jaypaydirt watching Cats at work, perfect!
Spring is just around the corner, you look like you is ready. Enjoy the start of the work.
Jay your more entertaining than the Keystone cops!!
Another nice one . Enjoyed the Rockabilly tune as well . Thanks
Thanks for another AWESOME video, that's 6 or 7, hell let's just call it an even dozen.
Hey Jeff another great video you're getting that thing totally rebuilt she's going to be like brand new good job keep it up be safe
Like the new old intro 😊👌. Great video again, can't wait to see your machines working.
I love me some old iron. Thanks Jay
Said it before, love your stuff. It must be a huge job you are getting ready for !!!!
I LOVE turbo sound on the service truck!!
Nothing but the best from the best folks!!! Love it!! 👍👍,
We need to make welding goggles for our German Shepards. mine loves to watch me weld.
Excellent video bro those scrapers will look right purdy when you start this new job with them. All the best
Those scrapers sure do take a lot of TLC to keep going. Cool video dude 👍
I see the snow has melted
Love all of your videos man!!! Entertaining to say the least, but I’ve binge watched all of em since I found your channel. Keep on moving dirt and makin videos
HA! Thanks Jeff! And woot woot on the flex fit hats, gonna get me one ordered up!
just watched a video of a farmer in upstate NY, who installed one of them switch blade turbos on one of his manure hauling trucks. waiting to see how he likes it now. great video as always.
Jeff, we all know how much you Love the color YELLOW, so why is the service truck still white? Lol.
I hope that no full shitters or holes were harmed in the making of this video
New Subscriber from New Zealand down under.
Nice too see the Gud old 637C's still working, I work for Twomey Construction in The Northern Waikato district, we've got those hopeless 627K's, but some F's & E's which keep hualing. Not a lot of scraper action down here, more 40-60 tonne Diggers & 30-40 tonne Articulated Dump Trucks. Still gud to see the old girls working, first Scraper I had a go on when I got straight out of school was a Caterpillar 637C. Cheers 😎
A shot per awesome you don't even have enough to get a good start ;)!
I miss the bikini intros.
DUDE YOU ARE GOOD WITH GRADER..
That was awesome jpaydirt thanks a lot.
Saint Pierre is a French Island (France) off the coast in Newfoundland Canada . Newfoundland itself is an Island furthest point east in Canada which is where I live 😊🇨🇦. I try to watch most of your vlogs. Great job.
Wow you guys are having some nice weather out there! About two feet of snow on the ground here in Roberts Montana. I used to work for one of the owners of Yellowstone Valley, Frank Donnes.
Another great video thanks for sharing
Love the Black smoke....Thanks...
Hi Jeff: New Subscriber Dave here. Just wanted to let you know that I get a real kick out of your channel and the videos you post. Shooting the video, editing all the footage, and tweaking it must be very time consuming but the end product is entertaining and informative, and like candy for a truck and equipment guy like myself. You must pick your times to video carefully as there doesn't seem to be much wind, even though every time I am in Eastern Idaho the wind is howling! I saw a painting of a plow being pulled by a parachute on a potato shed over by American Falls so I guess you locals get it too. I am recently retired from about 40 years on the road, and after selling all my trucks I am missing my equipment so watching your escapades gives me joy and a few pangs of regret. Keep up the good work and getting your hands dirty. I can really relate. Best wishes from Abbotsford BC Canada.
That crane on the service truck sure comes in handy. Now if only you could teach the dog to operate some equipment you would be set.
Awesome paydirt!!!
Hi Jeff, yet another great video. THANKS.
I'm amazed in the difference in the exhaust/smoke from the D9 after the switchblabe turbo. I feel lazy watching you do all the work. Is wrong to like the smell of diesel exhaust from an classic CAT? Gods speed and be safe.
And if you need a rear pack, my boss has a couple ready to go. Came out of 2 of our 37D’s that broke the hitch. Good running units, we’ve rolled rods and mains in em.
Love that tune!
hello from new york good video
Still blows me away when all three are hooked up and scrapping there are 6 engines chugging . You ever add the D9 on the tail too ? So total 1500 to 2000 hp ? Crazy !
tubes are chrome-moly. had good luck with silver solder..
On the hydraulic tubes, what we have to do it patch them. Just take a piece of pipe and literally weld the patch to the tube. Either that, or just replace the tubes with hoses. Especially for the ones that go from the backside of the bowl to the 2 speed valve for the ejector
you know what i would really like to see is that ford with the diesel carberator.
Love your channel
I saw the J&P Cycles sticker on the 637 engine. I buy stuff from J&P, as well.
It think that video was AWESOME 😁😁
Oh - Oh! Jeff is teaching his boys bad habits. Sneaking into Mom's kitchen to do mechanical work.
Yay!! Good see Ol Girty gettin a run, hope put a bit of Armer Oil on the dash, Jeff. And don't forget to put turtle wax on hood, don't want her to get rusty.
Love the Big Iron Hate working on them $$$$$.
Hi Jeff from Fort Myers, FL where I hide in the winter. In the spring I will return to the Pittsburgh, PA area. Question, is Shane connected to the VA? I hope he is eligible. Bob Hauger Cpl USMC a long time ago
You made me cringe when you put your finger in the clevis of that cylinder to smear some grease. I did that once but never again. Cylinder shifted and mashed my finger. Damn that hurt! Loved that little bump fest at the beginning. Like bumper cars only bigger. Reminds me of times past pushing pans (scrapers). Man I would hate to pay your parts bill. A never ending expense..........
Gud to see the old 637C's still working hard, company I first started straight out of school in New Zealand had to of these gud old girls along with a 627A, 623E and two 613B's. The old boss next door still runs a 613B doing growers work. Are your ones 1974-5's
Show me the diesel carburetor 😂😂😂
Straps looked like they were getting unsafe. Stay safe dude!
fix it fix it fix it fix it have a good week
Clickbait. Come on Jay you're better than that. Let's get back in the dirt and watch those 637 make money
Are these girls getting new make up (paint) to go along with all the surgeries?
Who taught that boy to stick weld?? Apple don't fall far from the tree!!
I was thinking the same thing. Looks like a robot welded it!
What you were saying about welding cat pipes. Ive done them in the past but you have to anneal either side of the weld and used lo-hi rods
To chill those bearings you can fill a can with acetone and drop a chunk of CO2 ice in. Then with pliers lower the bearing into the mix.
My 9th grade Science teacher used to hammer nails with a banana frozen with this stuff.
Couldn't hammer too hard though, sometimes it would shatter the banana...Google says it's -108.4F.
@@gravitationaleddie5611 Your teacher most likely used liquid Nitrogen for that demonstration.
Uh huh I hear you at 13:01. Lol
Oh and noticed the white grease. That Synthetic? The only white grease we have in the Deere line is. Its good stuff but it should be at about $9 a tube.
Cat mustard and Idaho blue... :)
If you ever need help I took a class on rebuilding those "diesel gas" carburetors at What's a Matter University, now they call them Overthrusters lol
Diesel carburetor!? Don't you get copyright strikes for playing the music? How did you bleed the air out of the cylinders?
Good video JPay Dirt
Close hanger try that as a welding rod
🍺🍺🍺🍺🍺🍺 six awesome drinks coming up , in not a alcoholic I'm Australian 🇦🇺 😉
@Peter Lee I did but beer is a staple diet these days lol
@Peter Lee coopers pail ale is good for that 🤪
I use moly grease (black with molybdenum disulfide and graphite I think) on everything, what's the white stuff? The water resistant stuff was usually red, Can you teach a grease school? That's a slippery subject I guess......
You are using the best grease available, end of story. I have tried all kinds and the moly grease works best in all temperatures. A little more expensive and pretty messy but out performs all others.
forrest gump once you go moly you won't ever go back.
Why don't they put a taper on those big pins?
Jay pay use 100 💯 % Silver solder !!! It will work !!!
Just a small question,since when did diesel engines clearly fitted with an fuel injection system need carburetors?
for starting I.H.answer to a pony motor.
What’s going on with old Kenny?
Could inexperienced operators do more harm then good if they ran push-pulls as opposed to regular conventional scrapers? That might explain why alot of companies don't use the push-pull's.
Brian Gardiner newer machines also have more power so it’s probably not as bad. And you can still hit it with a dozer.
I live on the gulf coast ,dont see temps like you guys, do you guys use a lighter grease in winter ? I know even here if it gets in the 30s the #2 lithium soap gets pretty stiff.
All my boy does is work on CATs ,on his 6th year servicing mining machinery
When you dropped the blade on the 9 out back of the shop I thought you had gotten fed up and was going to burry one of those Cats. lol You have spent thousands on hydraulic repairs on those pans. That govt job better pay good!!
in my country, the work he has done is already enough to collect full payment now itself, nvm the job
I really enjoy your videos. Your somewhat sarcastic sense of humor is a bonus. But, where are the young ladies in skimpy bikinis who also added an incentive to find your stuff. Please edit them back in, sir.
Who are the band playing while you're grading the run up to the concrete apron?
Brian setzer.
www.audioblocks.com/stock-audio/white-trash-163893.html
Type: Music
BPM: 108
Duration: 02:04
Artist: Chuck Hughes
Pro: ASCAP
Publisher: Soundscape Audioworks
Publisher PRO: SOCAN
@@Jpaydirt Thanks, Jeff...
Don't get that dry ice on Mrs PayDirt's Granite counter top!
That strap holding that has seen better days. Time to invest in a few new ones?
Awesome video Jeff. I was wondering who owns that beautiful grass strip behind your business there in Blackfoot? Did you build it, and have you ever flown out of there? I am a pilot and love grass strips like that one. Love your videos showing where you have built some of those strips around there. Thanks!
My dad built it in the early 50's I owned it up until a month ago now my son owns it, I soloed when I was 16 in a Citabria but haven't flown in years, to much money anymore, it's listed in the book as Russell Anderson Strip
@@Jpaydirt Wow, That's really cool. My dad and I used to fly a 76 Bellanca Citabria 7ECA. We would fly it with the door off in the summer. Talk about some fun!!! You should start flying again. I assume you son flies if he bought the strip from you? Thanks for the reply. PS Get the state to put some day-glow balls on those wires off the end there. Some knuckle head my snag them. Ha Ha
must be a really good one coming up, for all the expense in getting ready for it ... need any help??? (kidding ... I'm largely self taught and used to operating in consideration of the machinery, because I'm somewhat aware of what it costs to repair them or get them pulled from a mudhole ... which translates to "I know enough to be dangerous at what I do")
Where are the calendars girls and air horns at the start ? Did mother you tube give you a warning too ?
I need your advice. I have that heavy haul spec T800 kenworth with the unique vehicle wrap. My motor blow up.. engine specs. Cat 3406E serial number 1LW14715:
What happen: #1 injector tip broke off and washed out my cylinder. So now I’m stuck doing a factory cat platinum kit. In your experience what would cause the injector tip to break in half? I don’t want to rebuild then half same problem. Any advice is greatly appreciated! Only owned truck for 1 1/2 month and put 1563 miles on it.
email me your # jpaydirt7@gmail.com
👍👍
you,re guard dog made sure that grading job was done rite or he would have tore into you
Jeff, That would depend on what head your talking about wouldn't it???