Was Upgrading my 3D Printer Worth It? - Mk3.5 Upgrade
HTML-код
- Опубликовано: 27 июл 2024
- I turbocharged my Prusa i3 Mk3s+ with the Mk3.5 upgrade kit! In this video, I'll walk you through how I did the upgrade and added some great new features, making it a great deal without the huge costs of a new Mk4 3D printer.
Thanks to Kingroon for providing me with filament for my projects, you can check out their huge range of colours at kingroon.com/?sca_ref=6007788... (affiliate link).
💵 Use code 'BBce' for an extra 3% off :)
If you're interested in buying a Prusa 3D printer, consider using my referral code (@Bryce) so we both get up to 200 reward points to exchange for more filament :) www.prusa3d.com/product/origi... 
Наука
Thanks for watching + let me know if you have any questions about the upgrade! :D
"kind of like training your replacement before getting fired" lol
fr tho
Love that there is more than one type of upgrade kit! Very cool comparison between the original and the new upgrade 😀
I already sold my Mk3 this past month but I still enjoyed the video very much! Instead I got a P1S and have never looked back. Yes, I did have a close bond with the Prusa's but being from 2017 and all it just wasn't being used. The video format was very clean and descriptive yet straight to the point!
I just did it this weekend. Pretty worthwhile upgrade. The speed are pretty quick, but of course it’s that impeccable Prusa quality. You can even crank up the speed to 200% for fun and set your heater and flow rate a little higher and you can basically get the same speed as as a core Xy and the motors, don’t even get hot. Although I’m happy with 100%.
Great video!! I will probably get a new Mk4 instead of upgrading. That way I will have 2 printers moving forward despite the slow speed of the Mk3s+
I like my upgraded printer, really neat and I am now ready for the coming software improvements of the next years
I love this kind of content
Price is important but not everything. I also did the Update, it was fine and I had less problems with the heatbed, maybe I wasnt rushing or filming while I was doing it.
The update also helps to minimize Waste and is from all the available updates the best. The firmware bug for the leveling was fixed quite fast and also the beta firmware for the touchscreen is now live I think. They take time to validate things and dont just talk about a price or the performance. I do recommend the update, if you get a used mk3 for cheap it is also not that stupid to do. (price wise) It is still reliable like before, but much faster now :-D
Little note on the touchscreen: Firmware 6 is released now. Still gotta manually enable it though.
Also includes silent mode, which I don't notice a difference with. (My MK4 is sitting on the rubber pads it came with, on top of rubber pads for a washing machine for cable pinch peace of mind, on top of a 16x16in paver stone, on top of 2.5in of closed cell shipping foam.)
Also a reason… you have a mk3 and still love it but you want to use MMU3 ❤️
The price/performance ratio falls short. I can keep my Mk3s and _add_ a Bambu Mini for the same price as this upgrade.
i noticed a big improvement after the upgrade to 3.5
I just upgraded my mmu2s to an mmu3 on my mk3s+. It sat in a corner for 6 months because I have 4 bambu printers (x1c, p1p, a1 mini etc). Immediately remembered how brutally slow the mk3s+ is relatively speaking. So I ordered the 3.5 upgrade kit, and hope to bring it up to a more modern standard. Didn't see any value in the mk3.9 or mk4 kit as they are just too expensive and approaching the price of a new mk4 complete kit.
Apparently these upgrade kits also work on the Mk3S clones. I’ve heard of people successfully using the official Prusa Mk.4 upgrade kit on the Fysetc Prusa Mk3S clone, which from what I can see is a 1 to 1 copy of the genuine Mk3S. Thinking of doing that myself
Did you consider switching to Klipper firmware as an alternative? You could have saved a lot of labor by not rewiring the printer and a few hundred dollars, albeit at the expense of Prusa's support.
Cool
@0:21 ... depends ... I had 2 MK3S+ and it was cheaper to sell them and buy 2 new MK4's, then buying 2 upgrade kits. But then again, I'm also a lazy printer 😂
No other company make so similar product either
The price of these upgrades is wild. The middle and top end upgrades are straight up enough to buy a P1P/S
With today's price of the mk4 kit(750€), the upgrade to 3.9 (450€) is not worth it, especially with the 100€ discount they offer, easier to sell the mk3s for 200€, and the world is a better place with two printer instead of one ;)
please donate a old 3d printer to Cape Town please
Just to let you know if you have a Bambu labs p1p you can upgrade it to a p1s.
P1P is just a P1S without panels
P1S is just a P1P with panels
Hardly an upgrade.
All you're doing is adding an enclosure and it's really no different than just 3dprining your own panels which is what bambu intended with the P1P in the 1st place. The prusa MK3.5 is a true upgrade kit. As you completely change the printer and how it functions. No other company offers true upgrade kits for their printers other than prusa.
Imagine if Apple released a kit to turn your Iphone 13 into a 14... 😂
*for the price that's $100 less than a brand new 14
The comments about the thermostat are hilarious. It’s like when dumb people complain about some thing and it’s really their fault.
To me it just seems unfathomable that step 29 is removed the old thermostat which is clearly covered by aluminum tape and then step 30 is put tape down and nobody put two into together that five seconds ago. You just peeled aluminum tape off of the thermostat, why God would you not put the thermostat down first Logic instead of blindly reading step-by-step
It’s amazing 2+2 didn’t add up
wait, you dont even get the nextruder, what a pointless upgrade
You can get the MK3.9 if you want..?
@@djispro4272 yeh my dumbass didnt even see that it was 3.5 I thought it was just a mk4 kit