"Hey guys! I'm considering producing this knife for sale. What are your thoughts on it? Would you be interested in purchasing one? Drop your comments and let me know your opinions! 👇 #KnifeProject #RUclipsCommunity"
Thanks for your comment, this is the very first one I had made it is a kind of prototype I have to improve a few things, probably in the future I will make more to high standards in order to sell it
........Belts are an accessory, not a necessity. Your pants are supposed to fit well enough to stay up on their own, the belt is there to take up slack and make your outfit come together nicely. If this isn't the case, you need to visit a tailor or buy new pants.
a lot of hard work and then just ruined the metal. The spring must first be fully heated to a temperature of approximately 800 degrees Celsius. then hardening in oil and then mandatory tempering in an oven at a temperature of 200 degrees Celsius for one hour. then it will be a strong blade capable of cutting, stabbing and strong to break ask what “steel tempering” is, it’s very important
@@gabzsworkshop 5160 alloy steel is widely used for most leaf springs. The carbon concentration of 5160 steel is 0.6%, making it a moderate to high carbon steel. There is a lot of information on the Internet on the correct processing of this steel. good luck and enjoy your hobby
These knives may be illegal in most countries in the world. I am a lover of design and manufacturing, I love the process, but this is a piece for my personal collection that I will never use in public. I hope you enjoyed this video in which I show the process.😉
А отшлифовать и отполировать автор забыл ? Или такая небрежность и " топорная " обработка бляхи - ножа лучше....отшлифованной и отполированной вещи?...
It's it a prototype I have to do some improvements like add a cover shee, I will like to sell it for 100$ plus delivery Including the leader belt. But it is not in a mass production yet
он металл испортил. думал что провёл закалку. закалка не правильная и главное не было отпуска металла. Теперь это мягкий штырь. если бы просто оставил рессору как есть было бы лучше.
"Hey guys! I'm considering producing this knife for sale. What are your thoughts on it? Would you be interested in purchasing one? Drop your comments and let me know your opinions! 👇 #KnifeProject #RUclipsCommunity"
Can they be shipped to Europe and at what price?
My dad will love this!
So cool! Good job!! 👏🏽
I’m in shop tomorrow I’m building one these bad boy
I’m going to used a metal Punch just for my self that it .
@@davepetro5676 great, send me some pictures when you finish it 👍👌
@@gabzsworkshop you gave it a heated tip so much better.
Like some screw drive that suck with out the heated tip
Очень хорошая идея , дальше можно включить фантазию и сделать все свои носимые вещи двойного назначения ...
Таким ножом пряжкой можно себе живот проткнуть при неудачном движении, падении.
@@ИгорьАлексеев-т2ясогласен. Куйня какята
И грыжу заработать при ношении @@ИгорьАлексеев-т2я
Excellent merci beaucoup
Excelente excelente gracias
You love your job mate
Aweosome work. Such a great video. 😃😃
Masi, thank you for your support 👍
Perfect
Muito top parabéns
Nice work..trie to file corners from down to up,most perfect
Excellent work! I have a similar piece but not quite as nice as what you have. I’d definitely buy this.
Przepiękny jest ten pomysł pozdrawiam serdecznie i życzę miłego Super jest ⁵⅚🎉
Thanks andrzej poreda
Supernice!! Want one too...😍
Awesome job! I want one for myself
Maybe Plastic snap in container on belt may prevent an accident. By mistake.
What a creative mind and a great thinker. I congratulate you on that outstanding work👍🇲🇾
Thank you very much!
That guy likes to do things the hard way but it turned out well. It's good for stealth but not much for rapid deployment.
Knife turned out hella dope, @gabzworkshop.
Muy bueno me encanta ❤
👏🏻👏🏻👏🏻👏🏻👏🏻
I feel that the whole blade should slide into a sheath
Yes you are right 😂
Nice work! I would add a sheath on the back of the belt to keep from slicing your trousers.
Yes you're right, I will do. 👍
ficou muito bom
Хороший способ споткнувшись получить нож в живот)))
i love this i want one
👏🏽👏🏽👏🏽
Nice work 👍
Im interested.
something to be caught with at the airport...I forgot I had it on......
Hahaha 😅
Bravo
Es el arma perfecta
oi ja me inscrevi fica um like sucesso sempre
😎👍👍
Hara-kiri belt 😆
Вынул нож - свалились штаны. Гениально!
Это оружие двойного назначения, ни тем, так этим напугаешь.😂
Top demais
♥♥♥sHOW♥♥♥
Mantap👍👍🏿👍
Он же тяжёлый и неудобный ! Зачем он нужен ? Если только тайком на борт самолёта проносить... Но опять же, зачем !?
hahaha
I need one, I’ll make the sheath and leather belt. Heat treat the next one and sell it to me
Thanks for your comment, this is the very first one I had made it is a kind of prototype I have to improve a few things, probably in the future I will make more to high standards in order to sell it
Sir milsakti hai
Maravilha, poderia me dar um de presente???.
Great idea until your pants fall down in a fight.
Hahaha 👍😅
........Belts are an accessory, not a necessity. Your pants are supposed to fit well enough to stay up on their own, the belt is there to take up slack and make your outfit come together nicely. If this isn't the case, you need to visit a tailor or buy new pants.
it did not when i was wearing the same one
Belts are definitely a necessity for me. No it's, and's, or but's about it.
a lot of hard work and then just ruined the metal. The spring must first be fully heated to a temperature of approximately 800 degrees Celsius. then hardening in oil and then mandatory tempering in an oven at a temperature of 200 degrees Celsius for one hour. then it will be a strong blade capable of cutting, stabbing and strong to break
ask what “steel tempering” is, it’s very important
Your are right,this is my first knife, now I am working on new knife and I will do it properly.
@@gabzsworkshop 5160 alloy steel is widely used for most leaf springs. The carbon concentration of 5160 steel is 0.6%, making it a moderate to high carbon steel.
There is a lot of information on the Internet on the correct processing of this steel. good luck and enjoy your hobby
Yes Bos👍👍✍️✍️📗📗🔥🔥❤️
Ржаветь будет, сделайте из бронзы
yes, it will get rust with the time.
Need one Were are you
Jaja
I'm in Spain
หัวดี
Vc e bom nuqui vc fãs rapaz 👍
May b when u fall accidentally...it will puncture ur belly.... 😅😅
It's a prototype, I have to make a sheath
It will cut ur tummy
In Canada, a knife that looks like something other than a knife is considered concealed even if completely visible.
These knives may be illegal in most countries in the world. I am a lover of design and manufacturing, I love the process, but this is a piece for my personal collection that I will never use in public.
I hope you enjoyed this video in which I show the process.😉
Same in Germany.....completely vorbidden
Canadians and Germans are just about the same. ❤
Move to America. Problem solved
So Scissors are banned, right
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍⭐⭐⭐⭐⭐👍
, 😊😊😊,
А отшлифовать и отполировать автор забыл ? Или такая небрежность и " топорная " обработка бляхи - ножа лучше....отшлифованной и отполированной вещи?...
По-моему как оружие херня, долго доставать а как пряшка , тяжела
Do you have any idea how do it better I'm open to hear new ideas
РЕМЕНЬ МОЖНО БЫЛО БЫ И ДОРАБОТАТЬ , ТАК СЕБЕ, 40 ИЗ 100
Спасибо за комментарий, это прототип, есть что улучшить, нужно сделать чехол на ремень
VG
Идея хорошая, но не доработанная. Желаю доработать.
Почём?
It's it a prototype I have to do some improvements like add a cover shee, I will like to sell it for 100$ plus delivery Including the leader belt. But it is not in a mass production yet
Ну такое ...
На чём штаны будут держаться? Да и концы ремня будут болтаться.
он металл испортил. думал что провёл закалку. закалка не правильная и главное не было отпуска металла. Теперь это мягкий штырь. если бы просто оставил рессору как есть было бы лучше.
В пузо воткнётся пока носить будешь
It's illegal to wear it in my country I guess I will never will use it, I make it just for fan
Ужас! Чем выпиливать целый квадрат в пряжке, я-бы её сделал сварной из нескольких элементов! Там нагрузка никакая!
а зачем штангель царапать о каленую заготовку и рукожопить руками ? я бы раскрой делал лазером или водорезкой , Геометрию остальную на фрезерном чпу .
@@ОлегКо-э9к Вообще ещё лучше!
Killer