thanks to my raging issues I find myself buying these shells every month, it’s helped me save a lot of money, also thx so much for a always making different shells, I got a whole collection of them sitting on my gaming shelf/library, also for my controller the battery stays on so it’s much easier to set apart and put back on the controller is literally one piece and makes the job easier, might be because I smacked it to hard
This is definitely a lot easier then the Nintendo Switch Joycon’s... I started off with the Joycon’s and now watching this, I’m going to buy one of your items soon for my PS4 controller.
I bought this shell and did the mod a few months ago, and I could not be happier. something that is not shown on the amazon page or in videos is that the shell has a rubberized finish, which gives it a super premium feel.
I love extremerates mods and shells I know some people been looking for a ps4 controller to look like Xbox buttons for when they use ps4 remote on pc or to make it funny
I got my SNES shell yesterday and now I have to wait for my new controller to arrive I had ordered that's coming in 2 weeks and I'm a little nervous to do this shell exchange on the controller.😅
Good luck with the installation! BTW, please make sure the controller is original, there are a lot of fake or refurbished PS4 controllers now due to its stopped production! Both of the fake and refurbished ones have the different structure on the middle frame bracket so they won't fit our shell, our shell only fit to the total original PS4 controller.
I got this as a gift a while back, I love the feel of the controller after assembly, mostly.. but unfortunately the shell doesn't quite line up. I had to adjust the screw hole for the battery housing (no biggie) but even worse off, the shell itself doesn't mesh right. The front doesn't go into the back shell on the right side smoothly, leaving rough edges that aren't too comfortable.
I like Idea with symbols printed on shell just beside buttons...I’m waiting for some shells that I ordered and I hope they will fit since in last few months PS changed inner part of controller again (rubber for buttons now stand on 3 plastic spikes instead of 4...etc). Love Your work guys, and I hope I will stop on 7th controller...hahaha You make me mod too much :)
Thanks for being supportive of us so much!! And when you said they changed the inner part of the controller, do you mean for their new colors released in 2019 like red camo?
ExtremeRate I bought PlayStation pro, 2 weeks ago just regular black release(it was replacement for my older ps pro) and even though all my controllers are JDM-055, these are little bit different, parts that hold d pad rubber and XO buttons rubber are little bit different instead of 4 holding spikes only three are there (one missing) but they are in same places, I will check if other stuff is changed and where, once I get front and back shell from You guys that I ordered :)
Hello! After i changed my shell from my DS4 Controller, Everything fitted well, but than i noticed, my L2 ist Not perfectly working, so if i press l2, in a shooter for example, the trigger just goes in and out, so i scope and unscope ingame so many times, but i am Holding l2. Do you understand me? The further i turn the screws out on the back of the case, the worse it gets... i dont know what to do :(
hey I absolutely love your products but I was wondering if you could make some smart triggers/bumpers cause the only way to get them is from a pro controller or I found some german ones
Extremerate you people really need to make a grip for the ps4 dawn remap kit cuz mostly I like to use my controller with a grip to make it feel bigger and comfortable
We still produce it but can't be sell on Amazon EU. Please go to www.gamingcobra.com/products/classics-snes-style-soft-touch-front-back-shell-touchpad-for-playstaton-4-controller-replacement-housing-shell-with-face-buttons-for-ps4-slim-ps4-pro-cuh-zct2-controller-sp4sx08?_pos=8&_sid=89ed7b700&_ss=r
OMG OMG OMG I was practicing on my old but still usable controller and i completely froze I was scared to do anything i broke some of the clamps on the shell OMG is it bad I am really scared to do this now any tips. it would mean a lot to me
Don't worry about the clams, if they broke the controller still works and there is just minors extra gap between the front and back shell without them. Check the controller if it still functional before you put the front and back shell together. The difficulty of this project is just medium. Good luck!!!
Not sure, if you need it urgently please go to gamingcobra.com/collections/ps4-controller-shell/products/classics-snes-style-soft-touch-front-back-shell-touchpad-for-playstaton-4-controller-replacement-housing-shell-with-face-buttons-for-ps4-slim-ps4-pro-cuh-zct2-controller-sp4sx08
@@ExtremeRate the PS button on the inside is different from the one on the original controller... I cannot place the gel piece on the SNES shell... uh??????????
@@xDebts There are 2 different types of the PS button in Gen 2 controller, and we made our faceplate to fit them both, but that will make the installation of the gel piece is "clip" instead of "stick". If you don't understand what we mean, please let us know the JDM number of your controller (printed on the PCB board of the controller), and we will make a short video for you to show the installation.
I mean, Sony was originally working with Nintendo, and the PlayStation was going to be called the Nintendo PlayStation, but Nintendo decided not to work with Sony last minute. Controller looks awesome tho.
Nah it won't. The 1st gen and 2nd gen controllers have different back plates than each other. And eXtremeRate only makes things for 2nd gen most of the time. Noticed this when I tried putting an eXtreme rate kit on a first gen controller, the back plates (where the triggers are) are different
@@ExtremeRate They are! It was very interesting to see. I went out and got a 2nd gen after I noticed. Thank you for putting up the tutorial videos, as otherwise I wouldn't have been able to do it :)
Please go to www.gamingcobra.com/products/classics-snes-style-soft-touch-front-back-shell-touchpad-for-playstaton-4-controller-replacement-housing-shell-with-face-buttons-for-ps4-slim-ps4-pro-cuh-zct2-controller-sp4sx08?_pos=8&_sid=89ed7b700&_ss=r
this is probably the best looking controller shell i've ever seen
Thanks!
thanks to my raging issues I find myself buying these shells every month, it’s helped me save a lot of money, also thx so much for a always making different shells, I got a whole collection of them sitting on my gaming shelf/library, also for my controller the battery stays on so it’s much easier to set apart and put back on the controller is literally one piece and makes the job easier, might be because I smacked it to hard
Thanks for being supportive of us always!!
Thank you!
This is definitely a lot easier then the Nintendo Switch Joycon’s... I started off with the Joycon’s and now watching this, I’m going to buy one of your items soon for my PS4 controller.
Yes, the PS4 controller is easy :)
I bought this shell and did the mod a few months ago, and I could not be happier. something that is not shown on the amazon page or in videos is that the shell has a rubberized finish, which gives it a super premium feel.
Love the snes so I'll be getting this. Never took a ps4 controller apart though
Do it carefully ;)
Its very easy once you get going :)
Ohhhhh yes… back to the old good days when gaming isto mean something.
THANK YOU SO MUCH FOR THIS VIDEO
You are welcome and do you mean you made this?
I love extremerates mods and shells I know some people been looking for a ps4 controller to look like Xbox buttons for when they use ps4 remote on pc or to make it funny
Oh that would be funny!!
Imma buy this shell I saw it on Amazon and didnt know it came with tools too pretty cool also very nice and clean look to the shell
It comes with the tools!! :)
I think I found a new hobby and a new collection.
:D
I ordered this shell like 30mins ago. I'm hoping I can learn from your video here. I've only taken apart ps3 controllers
GOOD LUCK!!! :D
Beautiful controller 👌
I got my SNES shell yesterday and now I have to wait for my new controller to arrive I had ordered that's coming in 2 weeks and I'm a little nervous to do this shell exchange on the controller.😅
Good luck with the installation! BTW, please make sure the controller is original, there are a lot of fake or refurbished PS4 controllers now due to its stopped production! Both of the fake and refurbished ones have the different structure on the middle frame bracket so they won't fit our shell, our shell only fit to the total original PS4 controller.
@@ExtremeRate I already installed the shell onto the controller and it looks really amazing and I got it from the real deal on Amazon.
@@all-stargamer7574 Glad you like it! :D
I will receive my shell in 2 days. I can not wait
Good luck with the installation!
That looks amazing
Thank you!
I got this and put real SNES buttons in it for the classic feel (two are concave)
I got this as a gift a while back, I love the feel of the controller after assembly, mostly.. but unfortunately the shell doesn't quite line up. I had to adjust the screw hole for the battery housing (no biggie) but even worse off, the shell itself doesn't mesh right. The front doesn't go into the back shell on the right side smoothly, leaving rough edges that aren't too comfortable.
New Nintendo swichty 4 controller is looking fine af
Nintendo switch + N64 + ps4
Sorry, what do you mean exactly?
I like Idea with symbols printed on shell just beside buttons...I’m waiting for some shells that I ordered and I hope they will fit since in last few months PS changed inner part of controller again (rubber for buttons now stand on 3 plastic spikes instead of 4...etc). Love Your work guys, and I hope I will stop on 7th controller...hahaha You make me mod too much :)
Thanks for being supportive of us so much!! And when you said they changed the inner part of the controller, do you mean for their new colors released in 2019 like red camo?
ExtremeRate I bought PlayStation pro, 2 weeks ago just regular black release(it was replacement for my older ps pro) and even though all my controllers are JDM-055, these are little bit different, parts that hold d pad rubber and XO buttons rubber are little bit different instead of 4 holding spikes only three are there (one missing) but they are in same places, I will check if other stuff is changed and where, once I get front and back shell from You guys that I ordered :)
@@pavlebogdanovic7090 OK thank you very much! Please keep us updated!
Hello! After i changed my shell from my DS4 Controller, Everything fitted well, but than i noticed, my L2 ist Not perfectly working, so if i press l2, in a shooter for example, the trigger just goes in and out, so i scope and unscope ingame so many times, but i am Holding l2. Do you understand me? The further i turn the screws out on the back of the case, the worse it gets... i dont know what to do :(
Please check the rubber pad of the L1/L2 if it was installed sturdy.
😂😂😂😂 5:52 😂😂😂 😂😂😂😂😂😂😂😂😂😂😂 thanks God that you are good at doing shells 😂😂
lol
hey I absolutely love your products but I was wondering if you could make some smart triggers/bumpers cause the only way to get them is from a pro controller or I found some german ones
Yes please stay tuned! In March hopefully!!
@@ExtremeRate REALLY????
@@williamgates6652 Really!!
Where do you get those stands for the controller?
www.amazon.com/dp/B083DHK7LB
Extremerate you people really need to make a grip for the ps4 dawn remap kit cuz mostly I like to use my controller with a grip to make it feel bigger and comfortable
Thanks for your suggestion!
Man I bought one right before they became unavailable...seriously beaten myself up for it...hopefully I can purchase another soon
Don't worry, it will restock soon!
@@ExtremeRate I got it at $15 and now it's at $30 xD
I still bought 2 more haha darn yall
@@GeneStarwind344 Thank you!!! :)
@@ExtremeRate no problem thank you...cant wait for my shells today I gotta a led build I'm itching to build for my wife...
JDM-050 To Replaced, Right?
I like the music lol
:)
I just bought your led kit for ps4 controller too. Seen great reviews on your products. Cant wait to get it!
@@camerongrau Thanks!!! :D
ExtremeRate No problem🤙🏼
Is there any other way I can buy from your website, I’d rather PayPal the money instead of wiring it
Our website extremerate.com is only for wholesale. Which country are you from?
Love this but can't find it on any store in Europe. Do you still produce it ?
We still produce it but can't be sell on Amazon EU. Please go to www.gamingcobra.com/products/classics-snes-style-soft-touch-front-back-shell-touchpad-for-playstaton-4-controller-replacement-housing-shell-with-face-buttons-for-ps4-slim-ps4-pro-cuh-zct2-controller-sp4sx08?_pos=8&_sid=89ed7b700&_ss=r
Does the new PS4 back paddles work with the textured extreme rate back shell
Do you mean the official ps4 controller attachment? If so, yes.
What happened with your ps4 controller shells on Amazon Germany? they are all sold out.There will be replenishments and if so when?
Hi, We have some issues in EU with our PS4 controller shells, we are working on it and we hope we can solve it before April.
OMG OMG OMG I was practicing on my old but still usable controller and i completely froze I was scared to do anything i broke some of the clamps on the shell OMG is it bad I am really scared to do this now any tips. it would mean a lot to me
Don't worry about the clams, if they broke the controller still works and there is just minors extra gap between the front and back shell without them. Check the controller if it still functional before you put the front and back shell together. The difficulty of this project is just medium. Good luck!!!
@@ExtremeRate yeah thanks I did notice the gap but the controller worked fine thanks for the info
@@simplechannle3045 You are most welcome!
Does the touchpad still work after bending the pcb like that?
Yes!
amazon EU - when?
Hopefully in March
amazon.de - when?
Not sure, if you need it urgently please go to gamingcobra.com/collections/ps4-controller-shell/products/classics-snes-style-soft-touch-front-back-shell-touchpad-for-playstaton-4-controller-replacement-housing-shell-with-face-buttons-for-ps4-slim-ps4-pro-cuh-zct2-controller-sp4sx08
My controller model is CUH-ZCT2U
Is this the same model you use in the video???
Yes, CUH-ZCT2* is the Gen 2 PS4 controller (also you can find a lightbar on the touchpad)
@@ExtremeRate the PS button on the inside is different from the one on the original controller... I cannot place the gel piece on the SNES shell... uh??????????
@@xDebts There are 2 different types of the PS button in Gen 2 controller, and we made our faceplate to fit them both, but that will make the installation of the gel piece is "clip" instead of "stick". If you don't understand what we mean, please let us know the JDM number of your controller (printed on the PCB board of the controller), and we will make a short video for you to show the installation.
ExtremeRate same here, ps button gel having so much trouble
@@jordancamille89 We will make a video to show how to install the home button rubber on the shell
What model/version of ps4 controller is this supposed to be?
JDM 040/050/055. I saw your other comment about the logo part, please refer to this video ruclips.net/video/cr43uDuLJfQ/видео.html
Smart triggger🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿
Project is ongoing! Please stay tuned!
damn look at that gap
I mean, Sony was originally working with Nintendo, and the PlayStation was going to be called the Nintendo PlayStation, but Nintendo decided not to work with Sony last minute. Controller looks awesome tho.
Exactly! As I remember the only one Nintendo PlayStation console was auctioned on ebay last year
I need this
:D
Hi, this is soft touch right? same materials like nacon revolution controller? bcs i need same material like nacon..
Yes
@@ExtremeRate already ordered from extremerate website, thanks!
@@ponnysher You are welcome!
Uhhhh, extremerate I messed up and is there a way to fix it? Is there?? Coz I can't afford to buy a new one
What happened? Please don't worry, we will assist you to fix the problem, just please let us know more details of the problem.
@@ExtremeRate the vibration motors just came off I didn't know what to do. And I left the controller on when I was fixing it, it's dead.
@@lightningbolt1662 Do you know how to soldering? If so then solder it back. And the controller can still work without the motors.
@@ExtremeRate hmmm, let me try.
@@ExtremeRate yay, I fixed it! The delivery took sooooo long, phew I have it here
But will this shell and buttons fit on a 1st generation PS4 controller??
Nah it won't. The 1st gen and 2nd gen controllers have different back plates than each other. And eXtremeRate only makes things for 2nd gen most of the time. Noticed this when I tried putting an eXtreme rate kit on a first gen controller, the back plates (where the triggers are) are different
@@squeedles_1943 you mean the top of the back shell where it's that bar where the triggers or R1/L1 buttons sit?
@@FatalCorleone07 Only works on Gen 2 bro
@@squeedles_1943 Yes, the inside structure is totally different between Gen 1 and 2
@@ExtremeRate They are! It was very interesting to see. I went out and got a 2nd gen after I noticed. Thank you for putting up the tutorial videos, as otherwise I wouldn't have been able to do it :)
Only if you guys Shipped to Sri Lanka
Will this fit the ps4 slim controller
Yes
can i find it in aliexpress?
Please go to www.gamingcobra.com/products/classics-snes-style-soft-touch-front-back-shell-touchpad-for-playstaton-4-controller-replacement-housing-shell-with-face-buttons-for-ps4-slim-ps4-pro-cuh-zct2-controller-sp4sx08?_pos=8&_sid=89ed7b700&_ss=r
Is the jdm 055 compatible
Yes
Is this for the dualshock controller?
Yes, dualshock model CUH-ZCT2*