I have many of the same exact rocks. I just can't visually see any gold in them with my eyes because I don't have very good vision also I don't have a way to break it down or anything so this is a great video thank you any other tips would be helpful for someone on a very very light budget LOL. Thank you
During the video I wondered about the urea then you proved you must kill the Nitric to precipitate properly second question would it be better to use stainless steel rods just curious great video getting ready to fix my impact mail and start Legion and testing
Yess you need to kill the nitric ! You see hou gold dissolved in solution . I got the same amount of gold from dust.that changes everything . I can go to any place with the gold and get just dust . Do you understand what I saying ?
Thanks a lot for your prompt response, please let me know that can we precipitate palladium and rhodium from Aqua regia with the same method with different volt and ampere ??
@LarryCaso1126 What metal are those anodes made out of? The ones I purchased from Home Depot were made out of zinc. One of them, the metal started eating away, which means it was contaminating the solution with whatever was getting eaten by the acid in the solution. The I purchased silver anodes and the silver was getting eaten away as well..Why wasn't your anodes being eaten away? If they are iron, where do we buy them?
Those bolts is covered in zinc . No problem just put in hcl for few minutes and zinck be gone. Remember they covered in zinc very thin layer.you need to kill nitric with urea another way they be dissolved
If you have many kinds of metals in the solution, will this method only precipitate gold from them or all metals will be down? Hope you understand.. Please guide....
@@myadventure7069 Oh Thank you sir🙏, I got a lot of knowledge from you sir.😁👍 Because I Want To Process Gold From Rocks. I Learned A Lot From Your Videos Sir. I always fail when precipitating using SMB, while from Aquaregia solution I get enough black using Sncl². I'll try to do it with electrolysis and hope it works
Normally when you do electrolysis iron goin to solution and kill nitric . If you have strong aqua regia then takes a lot longer to kill the nitric .but when you use diluted aqua regia there nitric be gone already and you don’t get problems
Sir 1 question, what is the ratio of potassium nitrate and muriatic acid to make aqua regia to dissolve gold from ore? Because i really like your way of recovery.
Saya mendapatkan batu kemudian saya pecah dan saya bakar menjadi solid dan kelihatan emas di batuan tersebut. Saya meregia batu dan menghasilkan orange dan tes sncl hitam.
@@myadventure7069 i want to recover gold like this morning i use electric try to recover gold from solution is refusing to precipitate, i add urea to kill the nitric still it refuse, then i switch to alluminium this time it boble well but it changed from light green to yellow is where i am now if there is advice to give please do
@@myadventure7069 sir i checked now under the Beaker their is little yellow dust like gold after i just sent a reply to you and still bubbles strong but the colour is not changing to dark brown
@portiagava-rz5zh if you add aluminum and don’t get black powder but solution is grey then there no gold if still yellow add more aluminum and always kill the nitric !
Hello Professor, Here is a video that might help some. A technique for panning micro fine Gold ruclips.net/video/dEmnr5cV2Y0/видео.html Keith has a live chat every monday night called view from the penthouse. Hard Rock University. Its on at about 700 Central time. I'm not sure the exact time. Hope to see you there sometime. Thank you so very much. This helps but really fine 1000 mesh stuff still won't work. That's why I need your help. How do you get your silver out? Thank You so Much. You are Really helping me. Thanks! PS on this same playlist is an excellent One my Aussie Bloke Prospector on Recovery of super fine Gold. I'll Move them up to the top for you. Thanks Again sir.
Love your teaching style. You make your videos fun and very informative. Keep on instructing!
Thank you Professor👍, another experiment I will give a go on some rocks. Cheers Kev
Excellent Video.
thanks for sharing,I learn a lot
very informative one. thanx for this video sir..
Ahhhhhhh!!!!!! You live in L.A. Now I know where you finding all the rocks. Thanks. So it's not Russia.
Love the experiment mate
I have many of the same exact rocks. I just can't visually see any gold in them with my eyes because I don't have very good vision also I don't have a way to break it down or anything so this is a great video thank you any other tips would be helpful for someone on a very very light budget LOL. Thank you
❤❤❤
Электролиз почвы отличный, лучше чем химикаты, большое спасибо
👍👍👍👍👍
During the video I wondered about the urea then you proved you must kill the Nitric to precipitate properly second question would it be better to use stainless steel rods just curious great video getting ready to fix my impact mail and start Legion and testing
Yess you need to kill the nitric ! You see hou gold dissolved in solution . I got the same amount of gold from dust.that changes everything . I can go to any place with the gold and get just dust . Do you understand what I saying ?
I think if you use stainless steel that you contaminate with chromium and other unwanted metals.
Did you put nitric acid in the solution?
Sir please tell me what this machine eletrolysis. Is this the same machine using for gold plating.
Hello, Sir. Thanks a lot. Very good 🪴🪴🪴🪴🪴
Thanks a lot for your prompt response, please let me know that can we precipitate palladium and rhodium from Aqua regia with the same method with different volt and ampere ??
انت شخص رائع
@LarryCaso1126 What metal are those anodes made out of? The ones I purchased from Home Depot were made out of zinc. One of them, the metal started eating away, which means it was contaminating the solution with whatever was getting eaten by the acid in the solution. The I purchased silver anodes and the silver was getting eaten away as well..Why wasn't your anodes being eaten away? If they are iron, where do we buy them?
Those bolts is covered in zinc .
No problem just put in hcl for few minutes and zinck be gone. Remember they covered in zinc very thin layer.you need to kill nitric with urea another way they be dissolved
Use magnet , if it sticks to nail that meens iron . and I never see zinc nails.😜 zinc, more expensive than iron
One article said to use one electrode of gold because gold would deposit there anyway. Is that your Black Deposit?
If you put the alligator clamp lower on the electrode it will just sit on the glass.
If you have many kinds of metals in the solution, will this method only precipitate gold from them or all metals will be down? Hope you understand..
Please guide....
I mean that the other metals will remain in the solution or not by using the electric (iron bolts) method?
👍
Kıral suyu yapmadan önce HCl toprağı yıkama yapmak lazım mı
Приветствую! 👍
gud pm sir.. i missed your video about how to make stanous chloride.. coz i remember u did use silver soldering wire/rod?
ruclips.net/video/wU3eGcxHIk4/видео.html
In this way it precipitates all the minerals present within the solution
Cementing with zinc or aluminum
👍🤑
Tebrikler
Have you used a metal detector or gold detector to detect if gold is in the rock?
Gold in my place to small and mettal detector cant see that gold
Ok@@myadventure7069
Use the Gold Kruzer. It detects as low as 0.4g.@@myadventure7069
Sir is it possible to use copper in place of iron anode and cathode ?
No ! You don’t want have copper in solution
Hi Sir,, Electrolysis Precipitation Looks Easy, I Like it 😁👍 Does Aquaregia Solution Must Be Neutralized With Urea Before Electrolysis Is Done? 🙏
Yes if you use strong aqua regia . But I now using diluted aqua regia . It works just fine
@@myadventure7069 Oh Thank you sir🙏, I got a lot of knowledge from you sir.😁👍 Because I Want To Process Gold From Rocks. I Learned A Lot From Your Videos Sir. I always fail when precipitating using SMB, while from Aquaregia solution I get enough black using Sncl². I'll try to do it with electrolysis and hope it works
Use very diluted aqua regia !!!!!!!
@@myadventure7069 Ooh I see, ok I understand 🙏 But when doing electrolysis, the use of PH is not needed to stop electrolysis
Normally when you do electrolysis iron goin to solution and kill nitric . If you have strong aqua regia then takes a lot longer to kill the nitric .but when you use diluted aqua regia there nitric be gone already and you don’t get problems
Sir 1 question, what is the ratio of potassium nitrate and muriatic acid to make aqua regia to dissolve gold from ore? Because i really like your way of recovery.
I don’t know .for testing I putting minimum sodium nitrate. But if you doing refining then better use nitric acide
Couldn’t you just add the potassium nitrate until the gold dissolved? Pre mixing is not necessary.
Professor can you please tel me the make and model for the electric transformer you are using ?
Thanks
Are using transformer from Microway. I cut off high-voltage wires and add number 10 wire 12 wings .
I using 50 amps rectifier
gud pm sir.. can we use potassium nitrate instead of sodium nitrate? in your video you use sodium nitrate.
Yess you can use any nitrate ammonium nitrate sodium nitrate potassium nitrate .
@@myadventure7069 thanx sir.. your reply is hereby highly appreciated..
It's got to do with the salt levels?!
Are those two iron bolts?
Yess bot is iron bolts
cosco mine trail is wher I will be to day I think
lake isabella is where I'm going for sur
Saya mendapatkan batu kemudian saya pecah dan saya bakar menjadi solid dan kelihatan emas di batuan tersebut. Saya meregia batu dan menghasilkan orange dan tes sncl hitam.
Hi, i was away for some time but am back because i got rocks that contains gold
My question is recovering gold using electricity
Depends from what material you want recover that gold
@@myadventure7069 i want to recover gold
like this morning i use electric try to recover gold from solution is refusing to precipitate, i add urea to kill the nitric still it refuse, then i switch to alluminium
this time it boble well but it changed from light green to yellow is where i am now
if there is advice to give please do
@portiagava-rz5zh are you sure you have gold in solution ?
@@myadventure7069 sir i checked now under the Beaker their is little yellow dust like gold after i just sent a reply to you and still bubbles strong but the colour is not changing to dark brown
@portiagava-rz5zh if you add aluminum and don’t get black powder but solution is grey then there no gold if still yellow add more aluminum and always kill the nitric !
Hello Professor, Here is a video that might help some. A technique for panning micro fine Gold
ruclips.net/video/dEmnr5cV2Y0/видео.html
Keith has a live chat every monday night called view from the penthouse. Hard Rock University.
Its on at about 700 Central time. I'm not sure the exact time. Hope to see you there sometime. Thank you so very much. This helps but really fine 1000 mesh stuff still won't work. That's why I need your help. How do you get your silver out? Thank You so Much. You are Really helping me. Thanks! PS on this same playlist is an excellent One my Aussie Bloke Prospector on Recovery of super fine Gold. I'll Move them up to the top for you. Thanks Again sir.
I see that video and I am good on paning
very good video, please let me know the volt and ampere
12 volts
Is that just the dye from the screw coming off😂?...