Motorcycle LED Headlight Upgrade! | Project DR350SE Ep. 8
HTML-код
- Опубликовано: 29 июл 2024
- Today I upgraded the headlight on my Suzuki DR350SE to a super high light output, 4x6 inch LED with a high beam, low beam, and daytime running light option (DRL). This is a great upgrade on any motorcycle that will both make you more visible to others, day or night, as well as give you far better visibility at night.
The light that I bought for this video was purchased off eBay, but I've included Amazon links along with eBay links. (Affiliate links for which I may be compensated)
Light I Used: ebay.to/2AzgWtb
Similar Light: amzn.to/3xfzgot
CashedOutCars, Cashed Out Cars, CashedOut Cars
#LEDUpgrade #HeadlightUpgrade #LEDHeadlight For additional content, check out www.cashedoutcars.com! 
Авто/Мото
Want a light like this? Get them here! (Affiliate links for which I may be compensated) Light I Used: ebay.to/2AzgWtb
Similar Light: amzn.to/3xfzgot
Looks loads better.
I agree, and the light output is pretty crazy!
How has this held up?
did u make sure the beam height is correct? just to be safe and not blind incoming traffic.
Hello, can you tell me the exact dimensions of the netal plate and the holes
Brilliant upgrade! Literally.....😎 great for offroad....just a bit concerned it might be too bright for on road use???
I had that same concern. With the low beam on it’s not too bright during the day, and it is a DOT approves light, so it should be okay!
Great! This modification is possible also in DR 350 (no the SE model, without electronic starter)?
I don't see why not! These draw less power than stock bulbs so if anything it should help the bike. Good luck!
How is this holding up with the foam and all? I think I’m going to try and retrofit my Yamaha xt350 the same way.
So far so good!
Can you share a link for this headlight please?
JNS makes a direct bolt in headlight.
hows that tank sticker holding up I hear they bubble up?
My dad slapped that on as a joke, yeah it’s certainly bubbly. Any stickers on a plastic tank will bubble since the gas gets through it
Do you plan on replacing the turn signals with LED's?
I was going to but was worried about it turning into a bigger project than it was worth since most cheap LED turn signals don’t come with the proper equipment to make them flash at the right rate, based on what I’ve read at least
@@CashedOutCars well I just did mine, so if you ever decide to, just dm me and I can send you what I did. It was pretty cheap and fairly easy once I figured it out.
What about heat issues?
So far no problems. It does have massive heat syncs on the back of it, though air isn’t moving fast over it. I’ll get back to you if I have any issues
@@CashedOutCars Thanks, I really appreciate your expertise. You're blazing the trail for me.
Will this fit a DR650?