How to Replace Front Wheel 4x4 Locking Hub 2011-2016 Ford F-350

Buy Now!
New Locking Hub from 1AAuto.com 1aau.to/ia/1ASHS01570
This video shows you how to replace a front wheel 4x4 locking hub on your 2011-2016 Ford F-350. Not only can a worn locking hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions.
This process should be similar on the following vehicles:
2011 Ford F-350 Super Duty
2012 Ford F-350 Super Duty
2013 Ford F-350 Super Duty
2014 Ford F-350 Super Duty
2015 Ford F-350 Super Duty
2016 Ford F-350 Super Duty
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• T27 Torx Socket
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Extensions 1aau.to/oa/1AXAA00015
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Cloth Rags 1aau.to/oa/1AXSS00035
• Sandpaper
• Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@bud9719]

Hello, I’m changing these out on my 09 super duty 350 xl and one of the caps is only being held on by one bolt..it’s in 2wd but is is safe to drive if this cap comes off while I wait for the replacement hub locks?..Thank You

[@johncundiff3517]

Is there a wire to hook up when it goes together?

[@CAROLDDISCOVER-FINDER2525]

Thanks

[@scottberkman3584]

My hub separated from inside piece what do I do