My 8 year old son loves your videos and thinks you should make a Transformer suit for your next project. He's constantly talking about how cool your work is and is now begging for a suit of his own!
Very cool! I am very impressed! I've loved following your channel. I plan to build my own suit eventually based on the mark 42 design. I'll get to it eventually. You are a great inspiration.
wow james, that mechanism you have designed has turned out really well. it would be amazing if you could do this for each part of the suit, and have servos to open and close the latches! Good job on the suit so far :D
When it comes down to mechanisms like this, james, you are the man. I have a few ideas for you on how to make the rest of the suit fix on better (incle
Really good video... I keep saying that every video haha. I got a question. How are you going to put it on. I mean; in the movie first the lower part of the arm is put on and after that the upper part. But if you fix the upper and lower part together with some screws and washers how are you going to putt it on?
This is going really well! I'd say that the suit may be almost done in 2014 but the machine to build it will have to hide somewhere so that'll take a few more years! Good job with it all though! =)
I'm sorry to bother you but I would like to ask how many bits sold one of the departments mark 1 or 2 or 3 or 4 or 5 or 6 or 7? please let me know I am a great fan of your videos and iron man's
whats the point of the open/closing mechanism of the forarm if you can fit your arm through when its closed, will you be flling it with electronics that will make the space tighter? or is it just looks, and in that case is it not a bit big, in any case really cool build
I have watched a fair amount of your videos and love them, I would like to see how you develop some of these pieces. For example, how did you measure those angles for the hinge piece so exactly? Was this a bit of trial and error? How did you get those angles to precise? Or were you just lucky?
***** Maybe. But even without any wind, never start spraying right above the piece you wanna paint. Start next to it, push the nozzle hard, and move it to rhe right...but then dont STOP above the pipece, move it all the way pass it.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
My 8 year old son loves your videos and thinks you should make a Transformer suit for your next project. He's constantly talking about how cool your work is and is now begging for a suit of his own!
You sir will be known as a man who made every Iron Man fan's dream come true.
Watching this 7 years this is what got me into building armour
Very cool! I am very impressed! I've loved following your channel. I plan to build my own suit eventually based on the mark 42 design. I'll get to it eventually. You are a great inspiration.
U give the HOPE OF LIFE Man ...keep it up ..i'll Never Give up ...From EGYPT With Peace...
Good to see you're painting in a well ventilated area.
DUDE!!!! You're a beast LOVE IT!!!!!!
wow james, that mechanism you have designed has turned out really well. it would be amazing if you could do this for each part of the suit, and have servos to open and close the latches! Good job on the suit so far :D
When it comes down to mechanisms like this, james, you are the man. I have a few ideas for you on how to make the rest of the suit fix on better (incle
Hey James, good small ideas which made this thing a great thing.
Really well done man
You said "I'll show you this once more for your enjoyment." So when you popped the lever I was sure to make a fanboy squeal of amazement face for you.
I have seen all your videos an you still keep surprising me, amazing job
When you finish it, it will be the best iron man on youtube
You are a Genius, man!!! You are Iron Man!
well, I have made a suit too. Its combined into one piece and I can wear it like that too.
yes oh man this is getting better everyday
Awesome progress!
Can't wait until this is done
your one clever guy, keep up the good work! I look forward to the next video!
Looking really good.
great mechanics and everything I'm making a movie with a gauntlet and this is very helpful mech. inspiration. keep on building!!!
Its looking great, i'm looking forward to the next video
You should add a few clear coats to give it that shiny gloss everyone adores.
Will you do some detail paintjob later, or leave it as it is with basic red, silver and gold?
Cool, think you could make a motorized suit up gantry for it too?
keep up the great work
were do you get your creativity from? were you a person who always played with lego or something when you were younger? keep up the great work
You're a true pioneer!
Small rack and pinion hooked to a small motor would allow it to be hooked to a circuit board ;)
where did you learn how to do all of this? did you just think it up?
as always amazing work
such a talented man! if he was my dad id defiantly be getting an iron man suit from him! :p
what do you do for a living? ever need anything from the USA but cant get it? I am in Arizona
Will you be sorting something out for the gap where your arm bends in between the forearm piece and the bicep piece?
Really good video... I keep saying that every video haha. I got a question. How are you going to put it on. I mean; in the movie first the lower part of the arm is put on and after that the upper part. But if you fix the upper and lower part together with some screws and washers how are you going to putt it on?
best cosplay from Iron Man ever :))
great machine that used to make each part. As it cost?
nice work
So awesome!
I wish I had a 3D printer that way I could make a lego iron man mark 1 moc!
Wow your suit looks awesome! How much does making the whole suit cost?
Hi James
Just wondering what red and gold did you get and was it halfords ?? :)
When is the hand part 6 gonna come out.
You ever gonna show us the full look?
very interesting films. THX! Tonny.
Could you ever do a tutorial on how you made the hic
When you've finished the whole suil, would you consider selling them? If so, how much would you charge?
This is going really well! I'd say that the suit may be almost done in 2014 but the machine to build it will have to hide somewhere so that'll take a few more years! Good job with it all though! =)
Sooo awesome man
Not sure how your boots work currently, but i believe in the films it's the back that opens out.
that is really really awesome man. keep it up :D
Keep going buddy
I love James
hey james do you sell these lever things at your site
what type of regular and 3D printer do you use?
Nice! Have you ever costed the Iron Man suit?
Dude it's so awesome :)
Awesome work :D just wondering, the paint on this looks a lot better than on the hand, did you use a different type?
I'm sorry to bother you but I would like to ask how many bits sold one of the departments mark 1 or 2 or 3 or 4 or 5 or 6 or 7? please let me know I am a great fan of your videos and iron man's
whats the point of the open/closing mechanism of the forarm if you can fit your arm through when its closed, will you be flling it with electronics that will make the space tighter? or is it just looks, and in that case is it not a bit big, in any case really cool build
James, if you did this again now, I would recommend a kind of internal pulley and handle mechanism to pull the gauntlet shut.
my god, you are really into this
are these the Mechanisms For the mark 42!!!??!!!
I'll give you an example... blue ray player disk tray assembly ;)
which 3D software you use??
Awesome!
Very nice. I really need to build a printer.
Are the screw holes threaded?
I have watched a fair amount of your videos and love them, I would like to see how you develop some of these pieces. For example, how did you measure those angles for the hinge piece so exactly? Was this a bit of trial and error? How did you get those angles to precise? Or were you just lucky?
Could you do a CAD tutorial
awesome!!!!!!!!!
What type of printer are you using and what is the build area for that printer, =Length x Width x Height
what do you called these tool? and where you buy it ?
Hi, XRobot.
What do you use 3d modeling program?
Carl Jung auto desk 123d he said
Did you ever see the ironman suit of the one guy thats on alot of conventions?
Hey you could do that for the legs too or the thighs :D
Yes I love this vid yaaayy
awesome!
Curious about the red, are you using metallic red or just red? Hmmm, it looks a bit plastic-y.
what is this 3D projecting program
Nice work!... respectfully, you need a floating hinge on the elbows though for increased flexibility.
.......awsome
oye carnal disculpa de qe material es qe as echo cada parte de la armadura y como se llama el material con el qe isiste el puro guante grasias saludos
Do you attend Georgia Tech?
Just a hint, NEVER start spraying ON the piece.
*****
Maybe. But even without any wind, never start spraying right above the piece you wanna paint. Start next to it, push the nozzle hard, and move it to rhe right...but then dont STOP above the pipece, move it all the way pass it.
AnselmoFanZero
you two should make a working ironman suit together, just dont tell us how to do it
Kingdom Of Mog
I am not into suits and costumes.
AnselmoFanZero yes but james is, and you could make the working parts to make it a functional suit not a costume
Kingdom Of Mog
Could make a suit...thats not the problem. Fact is, I DONT WANT TO :p outer parts are easy.
5:58 BEST PART!
Can i print the helmet?
You are awesome
:D
You can/will do it!
How much dose the 3D Pinter cost
how mouch does a 3D printer cost? and where can somebody buy one?
Will u ever give it away?
Can i print it?
can you make one for me? how much money do you think a helmaet is from you guys?
I liked it
awesome
AWESOME!!!1
Hi James Im from Brazil and I would like to know if you sell it, if so, how much does one cost ?
xcellent!
whats your 3d print?
u could done the same mechanisme with the calf
You are like a young slightly british kipkay!!!
what type of regulat