Well done for actually explaining exactly what the dimensions given refer to, most of the videos that I've seen that claim to be explanations don't actually do this! (A career in creating technical documentation awaits you).
Why doesn't anybody talk about how bad the chain alignment is (BBSHD) with any of the newer bikes? even with the lekkie front sprocket . If you have a newer bike with a 12 x1, You're most likely gonna have something thicker than a 68mm, more like a 73mm bottom bracket, good luck getting into first and second gear without major alignment issues
My Stock BBS02 outputs 1150 Watt with 52 Volt (14s). You can also build in BBSHD controller to BBS02 and then tune up to 1600 watt. However, the BBSHD has more copper mass and some better internal details.
high there! can you please advise the proper conversion kit to fit a bafang 48/1000 motor into a 121 mm raceface press fit bracket wit 41mm diameter? Thank you in advance!
I wonder if you guys can recommend a shim for my kit, everytime I throttle my bafang motor it slams against the vertical bike tube, I tried a piece of metal but that completely wore out
My BBS 02 runs from a ASI BAC855 sinewave controller I also run 60v (16s) with F.O.C runs dream @ upto 2600w and the motor is almost silent compared to the square wave stock controller it's a different animal and for all that say you'll burn it out or blow it up, it ain't happened 1200 smooth faultless miles of operation..
Would the BBS02B fit in a Norco Fluid HT 1 bottom bracket? I think it’s a 750W motor by where I live their legally limited down to 250W. Also, is it easy to clock them up to 750W/full power if necessary or even switch between 2 power output modes such as when going off public roads(where laws don’t apply) and then back on public roads?Thanks
Beautiful, i understand this topic now too..
Well done for actually explaining exactly what the dimensions given refer to, most of the videos that I've seen that claim to be explanations don't actually do this! (A career in creating technical documentation awaits you).
Why doesn't anybody talk about how bad the chain alignment is (BBSHD) with any of the newer bikes? even with the lekkie front sprocket .
If you have a newer bike with a 12 x1, You're most likely gonna have something thicker than a 68mm, more like a 73mm bottom bracket, good luck getting into first and second gear without major alignment issues
My Stock BBS02 outputs 1150 Watt with 52 Volt (14s).
You can also build in BBSHD controller to BBS02 and then tune up to 1600 watt. However, the BBSHD has more copper mass and some better internal details.
The 02 runs much better with a ASI BAC855 sinewave controller I run 60v (16s) and will put out upto 2600w run perfect motor is almost silent.
Excellent video!
high there! can you please advise the proper conversion kit to fit a bafang 48/1000 motor into a 121 mm raceface press fit bracket wit 41mm diameter? Thank you in advance!
I wonder if you guys can recommend a shim for my kit, everytime I throttle my bafang motor it slams against the vertical bike tube, I tried a piece of metal but that completely wore out
My BBS 02 runs from a ASI BAC855 sinewave controller I also run 60v (16s) with F.O.C runs dream @ upto 2600w and the motor is almost silent compared to the square wave stock controller it's a different animal and for all that say you'll burn it out or blow it up, it ain't happened 1200 smooth faultless miles of operation..
Wow nice! Run into any problems yet?
I have a trike bike what bottom bracket adapter do I need
Would the BBS02B fit in a Norco Fluid HT 1 bottom bracket?
I think it’s a 750W motor by where I live their legally limited down to 250W. Also, is it easy to clock them up to 750W/full power if necessary or even switch between 2 power output modes such as when going off public roads(where laws don’t apply) and then back on public roads?Thanks
Hey, is there anyway to test a bafang mid drive controller to check if it's functioning correctly? Thanks man
Can any of these kits be installed in a 2018 Trek Stache? Cheers!
I like to convert but my bike has 66mm x 40mm. What kit can I use. Thanks
Any videos of how to shave the threads?
Not yet but you can is rotary tool but be careful and only to a bit and try to fit it in as you don’t want to over do it
Hi wot do you think about the new BBSO2B 🤔
Are the Conversion kits pedal assist only or/and throttle?
What do you recommend for a 92 mm bottom bracket?
I have a 2004 santa cruz blur with 68 mm threaded bb and 261/2 tires can you tell me if all bafang fit my frame
Yes it will
how do the pedals not hit the motor?
i have 1000w 100mm motor, what bike i can install ? pls help me
fat bikes
quiero hacer mi bicicleta eléctrica me podría ayudar vivo en los ángeles California
Yo te puedo asesorar