When I'm woodworking in the shop now, I have this epic "Grind Hard" stance I take and play U-132 in my head and vision myself routing in slow mo with the wood chips flying like grind sparks. I think I leveled up.
They had a dog two years ago that was brutally murdered by a bear- right in the shop. Sometimes when the moon is full they can hear howling coming from the cold, empty building. Poor Arfy. RIP
The ethan cam is great. I love your vids. Been here since the barbie car. You're projects are great. I wish i had the tools and materials for theese kind of things :)
I just noticed that the amazing music you guys always use is made by Edwin! I love how Edwin does the filming/music and Ethan the fabricating(mostly). You guys work so perfect together!
Fricken EXCELLENT as always! I did a 440cc snowmobile swap in a 250 Odessey as a kid. I'm sure this will be leaps and bounds better. I notice you guys are on a very fast learning curve. Bravo!
stephen s machining the driven clutch (socondary) would have been useless with that much torque & hp going through it. The helix would likely shatter & there’s no spring (either honda oe or aftermarket) that would work well. As soon as the drive clutch enguaged, the driven would open/shift out. With the polaris setup, they can play with custom/multi angle helixes & different springs to get the shift point where they want it & keep the motor in the powerband.
@@ROTAXD I've machined about 6 for my 670ho swaps (guessing by the name u know what that is) . if u go by what power level parts are supposed to hold then the fnr trans is useless too. lol years beating on both.
@@matttaylor4344 I feel like the trans or axles are going to go b4 the secondary . also not going hard on pavement and most importantly letting off mid air. my cousin broke his trans case right in half from staying full throttle on a jump. lesson learned cause them gear boxes were hard to find in like 2011 2012ish can't imagine now.
@@shifty1927 yeah the oddeyseys don't have that slipper clutch like the pilots do. I beat the hell out of mine and haven't had issues. But this build they have going makes more or equal power to my 700. I feel like they might explode that transmission. I hope not though!
We use to float secondary’s, easier on belts. Not sure why more folks don’t today. You just don’t want the secondary binding up on the shaft let it float.
Grind hard plumbing Make that 2 new subscribers I really enjoy the projects u build keep at it if u ever get a minute and u can message me I would love to talk over an awesome project that if we could mass produced talking bout making millions I always wanted to build it but then I got in an accident hit by a semi while riding with my ex girlfriend so that projects over for now sorry so long
Actually punching holes in those flanges can reduce the amount of stress in the part. These are used when the prats are odd shapes and have sharp angles! So you might have actually made it stronger!
I just wanted to say that you guys are my favorite channel to watch I love the way you edite the fab parts instead of taking them out and just the all around fabrication is amazing
Man y'alls channel is getting pretty good traction. I got here in the middle of the turbo Barbie car and you guys have grown so much. Keep up the great work fellas, from a Texas plumber.
Nice work guys! Cant wait to see it shred the back tires. That thing would be like strapping yourself to a balloon and letting it go in a hurricane!!!!! Love it. Keep up the good work!
Anyone here old enough to recall Mickey Thompson SCORE OFFROAD. They had a class for Odysses and that morphed into custom frames and outlaw engines. It got crazy towards the end. Many of the custom frames live on in Australia today.
First ATV I ever drove was one of these back in like 1990. I was about 10. Bringing back some memories. I've never owned an ATV of any sort, perhaps I should look for one of these and take on a project myself out of nostalgia
I would like to see a modern Honda Pilot/Odyssey, this is why I like watching honda FL250/FL350/FL400 builds. Good work and good luck. I personally would have liked to see a honda CB500 engine in the honda Odyssey ... but that engine is around 50 HP.
Hell yeah brother that thing is going to be awesome love the builds and the filming you guys are bleeping sweet I've been wanting to get a t-shirt but funds are tight I have a couple projects I'm working on myself love it guys keep up the great work
Good job man. You r building every 90s kids dream. Please make it work. In 1989 I asked my parents for a 350 just like that one and they bought me the plastic battery powered version, power Wheels I think. It was the worst Christmas of my life, literally heart broken to find some plastic piece of shit in the garage Christmas morning. It absolutely destroyed me to have to choke it up and tell my parents how cool it was but at heart I was screaming ( u bastards, how could u do this to me.) I'm over 40 now and still I will never forgive them for that.... I hope your rips and u have tons of fun...
Guys, I hate to be a safety Sally... but be careful with dog food and water around the shop. My uncle had a shop dog who was 17yo and had plenty of life in him yet, and he ended up just eating a few metal shavings from drilling steel, and they killed him... The vet said that the sharp metal made a bunch of cuts in his intestines and he got sepsis and now he's gone... poor baby good boy, that is such an awful way to go... he suffered for a while before we knew what was wrong, he was old so his odd behavior and hiding and refusing food seemed relatively normal... until he started spewing black blood from both ends. Just be safe with your good boys. Please. My pup currently has booty cancer and nothing is worse than losing your bestest friend... fuck. I made myself sad. Anyway, I live the content and plan to stick around! I hope to see those good boys in future videos healthy and happy! Give your pups a hug and let them know you love em! I just would hate for something awful to happen because of an honest mistake that could be easily avoided. Just keep the food and water covered or inside while you work, or put it where there is little to no chance of something foreign and harmful ending up in their drink. Dogs are lovely, but dumb. They will eat some crazy stuff and not even notice! So just watch those bowls please. Thanks.
What’s up 90’s kids? Where you at?! The Ethan cam, was of utmost need. This video was great, seeing the collaboration & new features as well as some new music(?)! Love it. You guys bust ass & I love that you’re tearing apart a Polaris! lol Ski-doo for life.
I love this episode, just watching and learning. I am building my first go kart, and I have learned that it cost a lot😧. So its a little bit going slowly but I am trying. I just Learn a lot from your video's. Thx
Yes we noticed the same thing. a lot of the parts individually are cheap but they really add up quick when you start putting them together. But it's so much fun and so worth it
Nothing beat like body part as a temporary work bench, what could possibly go wrong,, btw , you sir are a technical engineer because you actually apply in real life what you imagine in your head, like me, cheers a huge A++ for this entire project and the barbie jeep
Nice I have a similar setup but with a Honda cbr 900 it's wicked fast has the 6 speed . No reverse is its downfall . I'm ashamed to say mines bought not built by me . You are inspiring though ! Got a new subscriber here in central Oregon !
Just a little FYI guys I am betting that pull rope is going to be cutting a Groove into that plastic tank. Every time you pull on that rope it's going to cut into that plastic tank and next thing you know you're going to have a hole in it keep an eye on it the best thing that I could think you could do is get a piece of sheet metal and wrap it around that plastic tank and make sure that it is a smooth transition around that corner because then it will start cutting into your rope and it will cut the rope. I think you got enough common sense to know what I'm talkin about. Looking good guys can't wait to see that thing scream. And yes you are one of my favorite channels out of all of them you build the most badass!!!
Mike's golf cart is badass. I was thinking about offering to race you guys with my 1000cc golf cart but my suspension is from a Banshee and it would be the hindering factor for sure. My golf cart is an old metal ez-go with a 2004 cbr1000rr engine in it. Saw it on craigslist and knew I needed to go get it and fix it up. I was planning on building the long travel setup this summer but life started changing and I'm moving so it's going to get stored with a friend for now.
VlogsWithDev that could be an issue with the offset on the front as the oddesseys front suspension/brakes/hubs etc are actually off of their 200 & 250 trx utility machines. The increased offset will increase the load on the bearings, studs, spindles etc. actually, the best thing they could do is stick the front suspension off of an 87 or 88 trx 250r and use the knuckles, disk brakes & aluminum wheels from one also.
Technical term of the day, "super extra strong". It lies somewhere between "it aint goin no where" and "its bullet proof".
Word haha
I hear you. I convert metrics to Chunthairs.
"It's good enough for that "
When I'm woodworking in the shop now, I have this epic "Grind Hard" stance I take and play U-132 in my head and vision myself routing in slow mo with the wood chips flying like grind sparks.
I think I leveled up.
Heck yeah that is awesome! Glad you dig my music too. You should make a woodworking video to it!
I appreciate the fact that you take the time and effort to properly engineer and fabricate your projects.
As a machinist/fitter/ fabricator, I can get into this kind of thing. Great work.
I hope you guys never quit building cool stuff I honestly love watching these videos
Like seeing safety being priority especially when you should have a lot of power
1:30 the welding mask makes the shadow look like a dog 🤣
Luis Covarrubias 😂😂😂 can never be unseen
Is that actually the dogs bowl? Dunno if that is safe for the dog to drink that haha...
woahh
They had a dog two years ago that was brutally murdered by a bear- right in the shop. Sometimes when the moon is full they can hear howling coming from the cold, empty building. Poor Arfy. RIP
The ethan cam is great. I love your vids. Been here since the barbie car. You're projects are great. I wish i had the tools and materials for theese kind of things :)
Aaaw, thought you were swapping a Honda minivan engine onto that go kart lol
I just noticed that the amazing music you guys always use is made by Edwin! I love how Edwin does the filming/music and Ethan the fabricating(mostly). You guys work so perfect together!
Idk what the music is called but it gets me hyped every video lol
BackWoods Riding same doggo
The links to the music are in the description box, Edwin makes it
NO!!!
@@VasilyYt Yeah Edwin, just make a new song every single video...
ruclips.net/video/ZNMintcEvoE/видео.html
this is my favorite
Looks great! Awesome fab work as always.
You are a legend Matt!
Everytime I hear your new song is flashes me back to my childhood spending hours playing adventure racing on n64😂 keep up the killer work🤘
I thought it was wave race
@@scottroberts7496 could be in that too idk, never played that. I know it's in beetle adventure racing for sure
Roses are red
Violets are blue
I'm on the notification squad
How about you?
Rammatic ye
Nah cause RUclips doesn’t flipping notify me when they post and it’s annoying
I wish we could pin two comments...
Absolutely, I am waiting for this video each friday!!
Yes always n forever
That song at 7 mins and 44 seconds was featured in one of my favorite video games. Adventure beetle racing for Nintendo 64.
7:44
It's such a good game. I had some fun with the tune here ruclips.net/video/ZNMintcEvoE/видео.html
I really liked the episode format and focus on the smaller details, keep being legends!
Got to ride an Odyssey back in the day that had a 440 snowmobile motor in it. That thing was fun.
Watching your content from Australia 🇦🇺,
Keep up the awesome builds been watching since the barbie car build 🤘
Fricken EXCELLENT as always! I did a 440cc snowmobile swap in a 250 Odessey as a kid. I'm sure this will be leaps and bounds better. I notice you guys are on a very fast learning curve. Bravo!
Always thought the odyssey and pilot would have sold better if they were two seaters instead of single. Honda was ahead of there time on these .
And then they turned em into stew-pid people movers .
Love it man, the Ethan cam was a great new addition. 90s kid right here🤘🏼
Yes awesome we will keep it up!
Was gunna leave a comment being like “yeah the Ethan cam is cool” but I just love how you film your videos in general aha. Keep killin it👊
Thanks man!
damn that adapter is awesome. better than machining the secondary for the sled belt
stephen s machining the driven clutch (socondary) would have been useless with that much torque & hp going through it. The helix would likely shatter & there’s no spring (either honda oe or aftermarket) that would work well. As soon as the drive clutch enguaged, the driven would open/shift out. With the polaris setup, they can play with custom/multi angle helixes & different springs to get the shift point where they want it & keep the motor in the powerband.
@@ROTAXD I've machined about 6 for my 670ho swaps (guessing by the name u know what that is) . if u go by what power level parts are supposed to hold then the fnr trans is useless too. lol years beating on both.
@@shifty1927 run the stock secondary on my pilot with a 700 swap. No issues yet!
@@matttaylor4344 I feel like the trans or axles are going to go b4 the secondary . also not going hard on pavement and most importantly letting off mid air. my cousin broke his trans case right in half from staying full throttle on a jump. lesson learned cause them gear boxes were hard to find in like 2011 2012ish can't imagine now.
@@shifty1927 yeah the oddeyseys don't have that slipper clutch like the pilots do. I beat the hell out of mine and haven't had issues. But this build they have going makes more or equal power to my 700. I feel like they might explode that transmission. I hope not though!
We use to float secondary’s, easier on belts. Not sure why more folks don’t today. You just don’t want the secondary binding up on the shaft let it float.
I love that the videos are more longer❤
The build quality keeps getting better! 👍🏻👍🏻👍🏻
That music... it’s wonderful!
Freaking genius freeing up the seized pistons like that
Thanks man! It was a moment of inspiration for sure!
Just made my weekend seeing another Odessey video!! Can't wait till next week.
Awesome to hear! Thanks for watching
Hurry up and make the next video...you have the best project going on RUclips right now...
3 . 2. 1. Go! Fusion Frenzy!!!
That's hard that work got you a new subscriber!!
Thanks! We won't disappoint!
Grind hard plumbing Make that 2 new subscribers I really enjoy the projects u build keep at it if u ever get a minute and u can message me I would love to talk over an awesome project that if we could mass produced talking bout making millions I always wanted to build it but then I got in an accident hit by a semi while riding with my ex girlfriend so that projects over for now sorry so long
I'm going to say music reference to N64 game is Adventure Beetle racing I used to play the Daylights out of this game lmao
Actually punching holes in those flanges can reduce the amount of stress in the part. These are used when the prats are odd shapes and have sharp angles! So you might have actually made it stronger!
This channel has definitely given me some ideas and inspirations for my next project. Great content keep it up!
Great to hear!
I Love fellow youtuber builders helping each other out. That Moto Mule guy is NO JOKE, and neither are you guys!
I just wanted to say that you guys are my favorite channel to watch I love the way you edite the fab parts instead of taking them out and just the all around fabrication is amazing
I really enjoy these cool builds. Your fabrication work is amazing.
Man y'alls channel is getting pretty good traction. I got here in the middle of the turbo Barbie car and you guys have grown so much. Keep up the great work fellas, from a Texas plumber.
Thanks man! We appreciate the support!
@@GrindHardPlumbingCo no problem , I appreciate the awesome content.
Nice work guys! Cant wait to see it shred the back tires. That thing would be like strapping yourself to a balloon and letting it go in a hurricane!!!!! Love it. Keep up the good work!
Watching this while waiting for a job interview... I got this
Good luck😀
Awesome how did it go?
Pretty good actually! Thanks lol
Now doing the Red Means Recording stuff over here too. Love it.
Oh yeah it makes everything better!
Anyone here old enough to recall Mickey Thompson SCORE OFFROAD. They had a class for Odysses and that morphed into custom frames and outlaw engines. It got crazy towards the end. Many of the custom frames live on in Australia today.
This thing is going to be more bonkers than the Barbie Jeep. Great work so far guys!
This is how real artist get things done! We can win, Revolution!
First ATV I ever drove was one of these back in like 1990. I was about 10. Bringing back some memories. I've never owned an ATV of any sort, perhaps I should look for one of these and take on a project myself out of nostalgia
you guys are very smart engineers/fabricators even if its all for fun... epic channel
Thanks!
I would like to see a modern Honda Pilot/Odyssey, this is why I like watching honda FL250/FL350/FL400 builds. Good work and good luck.
I personally would have liked to see a honda CB500 engine in the honda Odyssey ... but that engine is around 50 HP.
Been here since 3K
Awesome work from both sides of the videos guys. Favorite new channel to binge!
Thank you guys. I just got home from work, your video made my night better. She is coming along nicely.. Have a great weekend gentleman.
Another great video! I REALLY can't wait til this one is done... This project is one that I have always wanted to do!
Hell yeah brother that thing is going to be awesome love the builds and the filming you guys are bleeping sweet I've been wanting to get a t-shirt but funds are tight I have a couple projects I'm working on myself love it guys keep up the great work
Well thanks for watching! And if the funds are tight we would definitely way rather you put your money towards your builds!
Dude yes "beetle adventure racing" dude. The snowy👽 ship level and buggy was my fav. I look forward to your vids. Keep up the good work!
It's a blast!
Sweet she's almost done! I can hardly wait to see her run!
Good job man. You r building every 90s kids dream. Please make it work. In 1989 I asked my parents for a 350 just like that one and they bought me the plastic battery powered version, power Wheels I think. It was the worst Christmas of my life, literally heart broken to find some plastic piece of shit in the garage Christmas morning. It absolutely destroyed me to have to choke it up and tell my parents how cool it was but at heart I was screaming ( u bastards, how could u do this to me.) I'm over 40 now and still I will never forgive them for that.... I hope your rips and u have tons of fun...
Guys, I hate to be a safety Sally... but be careful with dog food and water around the shop. My uncle had a shop dog who was 17yo and had plenty of life in him yet, and he ended up just eating a few metal shavings from drilling steel, and they killed him...
The vet said that the sharp metal made a bunch of cuts in his intestines and he got sepsis and now he's gone... poor baby good boy, that is such an awful way to go... he suffered for a while before we knew what was wrong, he was old so his odd behavior and hiding and refusing food seemed relatively normal... until he started spewing black blood from both ends.
Just be safe with your good boys. Please. My pup currently has booty cancer and nothing is worse than losing your bestest friend... fuck. I made myself sad.
Anyway, I live the content and plan to stick around! I hope to see those good boys in future videos healthy and happy! Give your pups a hug and let them know you love em! I just would hate for something awful to happen because of an honest mistake that could be easily avoided. Just keep the food and water covered or inside while you work, or put it where there is little to no chance of something foreign and harmful ending up in their drink. Dogs are lovely, but dumb. They will eat some crazy stuff and not even notice! So just watch those bowls please. Thanks.
IVE BEEN WAITING ALL WEEK FOR THIS VIDEO!!!
We will try and post 2 next week
Grind Hard Plumbing Co 🤘🏻🤘🏻🤘🏻🙏🏻🙏🏻🙏🏻 AWESOME!!!! I freakin love this channel!!
1000CC street bike motor would be awesome.
wrxsubaru02 oh this 800cc two stroke is more than enough for this thing and is way easier to adapt to this frame given it was already belt drivin
What’s up 90’s kids? Where you at?!
The Ethan cam, was of utmost need. This video was great, seeing the collaboration & new features as well as some new music(?)! Love it. You guys bust ass & I love that you’re tearing apart a Polaris! lol Ski-doo for life.
Oooh getting close now guys guna be a monster can't wait keep at it cheers
Nice idea on using the hydraulics to free the pistons. Not sure if I would have came up with that one myself.
You can also use a master cylinder to unclog and clean brake lines
El mejor canal de RUclips?
Yo creo que sí porque ni hablo inglés pero igual no me pierdo ningún video
Gracias!!! Por eso ponemos subtitulos en espanol
Igual siguen siendo los mejorreeeees
Jajaja ahora veré mejor los videoooos
i'm inglish pero se ablar español 😆
90s kid here! Shoutin back!
I love this episode, just watching and learning. I am building my first go kart, and I have learned that it cost a lot😧. So its a little bit going slowly but I am trying. I just Learn a lot from your video's. Thx
Yes we noticed the same thing. a lot of the parts individually are cheap but they really add up quick when you start putting them together. But it's so much fun and so worth it
I got an N64 with 8 controllers and 37 games. My favorite console ever. Mario Kart!!!
It's legendary that is for sure !
Great video gentlemen.. love watching your builds.
This build is the most epic by far.... that 800 two smoke is gonna wail !
Your builds are awsome! That Odesey is gonna be hella fun! Allready is.
Man dude is really smart good idea with the stuck master cylinder
Beetle adventure racing great game
The 2 missing lug nuts in the vids screen shot almost made my eye twitch
Oh we will fix them before we run it for sure!
Awesome video you guys! Great shots and editing. And of coarse that fl800 is awesome. It’s going to be stupid fast. Best of luck. Be safe.
Amazing video! So entertaining. Good job, guys! Getting better by the minute
Thanks girl
Nothing beat like body part as a temporary work bench, what could possibly go wrong,, btw , you sir are a technical engineer because you actually apply in real life what you imagine in your head, like me, cheers a huge A++ for this entire project and the barbie jeep
Dopppppeeeee. Keep killing it. The kart looks sick
I absolutely love your builds, I wish I had a quarter of your talent.
impressive videography, pro level work
This is gonna be awesome 👍👍 some of my best memories as a kid was getting to ride my cousins Odyssey and pilot
Nice I have a similar setup but with a Honda cbr 900 it's wicked fast has the 6 speed . No reverse is its downfall . I'm ashamed to say mines bought not built by me . You are inspiring though ! Got a new subscriber here in central Oregon !
Hey at the end of the day if you use and enjoy your toys that's all that matters right! Thanks for watching!
I love watching your videos
PD: That Honda is going great
Going to bad ass when it’s done can’t wait wish Honda still made them
Just a little FYI guys I am betting that pull rope is going to be cutting a Groove into that plastic tank. Every time you pull on that rope it's going to cut into that plastic tank and next thing you know you're going to have a hole in it keep an eye on it the best thing that I could think you could do is get a piece of sheet metal and wrap it around that plastic tank and make sure that it is a smooth transition around that corner because then it will start cutting into your rope and it will cut the rope. I think you got enough common sense to know what I'm talkin about. Looking good guys can't wait to see that thing scream. And yes you are one of my favorite channels out of all of them you build the most badass!!!
This is awesome. I just blew up the motor in my oddesey. Can't wait to find another motor for it.
I’m getting pumped for the awesome music... 7:40 I find it
Amazing project! Love it! Can't wait to see the final product!
Looking forward to y'all future endeavors
Oh man! I used to love using the old piranha machine in votech. Haha
They are pretty sweet!
That thing would look sweet in metallic lime green with the gold wheels!
Mike's golf cart is badass. I was thinking about offering to race you guys with my 1000cc golf cart but my suspension is from a Banshee and it would be the hindering factor for sure. My golf cart is an old metal ez-go with a 2004 cbr1000rr engine in it. Saw it on craigslist and knew I needed to go get it and fix it up. I was planning on building the long travel setup this summer but life started changing and I'm moving so it's going to get stored with a friend for now.
Idk if you guys were thinking about this or not, but for wheels how about you use wheels from a racing ATV like a YFZ450R or something
VlogsWithDev that could be an issue with the offset on the front as the oddesseys front suspension/brakes/hubs etc are actually off of their 200 & 250 trx utility machines. The increased offset will increase the load on the bearings, studs, spindles etc. actually, the best thing they could do is stick the front suspension off of an 87 or 88 trx 250r and use the knuckles, disk brakes & aluminum wheels from one also.
@@ROTAXD that's not a bad idea. It'd still use quad wheels so I'd go with that
looks awesome guys, coming along very nice. cant what to see it ripping around.
Awesome
Man I love these little buggies. This one is going to be bad ass!
That new pov is awesome, love the vids
I love the pov shots!
I learn something new every time I watch the video, awesome job guys
Loving the Ethan Cam.
Cant wait to see this bad boy up and running
This Odyssey is going to be sick!!!