Why my engine don't start? Check timing belt or chain positions!

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • ¿Por qué mi motor no arranca? ¡Verifique las posiciones de la correa de distribución o la cadena!
    Why my engine don't start? Check timing belt or chain positions!
    Disclaimer:
    These videos are intended to offer general information working a car and tools.
    The Peter Finn have used best effort in creating the video. No liability can be accepted by the author and publisher for any expense, damage or injury caused by any errors in the information given. In no event shall author be liable for any direct, indirect damages or loss of profit by you or any third party.
    Due to factors beyond the control, I cannot guarantee against improper use or unauthorized modifications of this information. Peter Finn assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Peter Finn.
    Work carefully and safely. Also avoid accidents.

Комментарии • 62

  • @ditr257
    @ditr257 4 года назад +2

    Excellent analysis Peter!

  • @jupitermobile6984
    @jupitermobile6984 Год назад +1

    Welldone and great job. Loved your video. Salute 🫡

  • @elastonnjovu87
    @elastonnjovu87 2 месяца назад

    Well explained. Thank you

  • @abdelhamidaber9954
    @abdelhamidaber9954 4 года назад +2

    رائع يا بيتر واصل .

  • @fgarage2912
    @fgarage2912 4 года назад +2

    Nice👍👍👍

  • @ebrahemfaruk330
    @ebrahemfaruk330 4 года назад +1

    Thank you so much.

  • @Delacruzsfamily2024
    @Delacruzsfamily2024 3 года назад +1

    Do we need to drain the engine oil before changing timing chain or no need?

  • @yuusufcali4935
    @yuusufcali4935 4 года назад +4

    My name is yusuf I live soomalia I want to know more

  • @eliaskassab8233
    @eliaskassab8233 3 года назад

    Thanks Peter, your video is really helpful. 🙏🙏🙏

  • @paulgrayjhon4851
    @paulgrayjhon4851 4 года назад +2

    Un saludo para mí amigo Peter

  • @GasunzuCharles
    @GasunzuCharles 3 месяца назад

    ndagushimiye cyane😊

  • @MayoCarsDR
    @MayoCarsDR 4 года назад +1

    Nice #MayoCarsDR

  • @lem7827
    @lem7827 Месяц назад

    Good job

  • @desmondb2977
    @desmondb2977 3 года назад

    Keep up the great work man.... I enjoy your videos.... they are very useful... I had to change my own timing chain and didn’t know how, until I came across your videos.

  • @sergejpanov5543
    @sergejpanov5543 4 года назад +2

    And if the timing is not OK, then what? How do I fix it if the timing is not OK? What is the purpose of the yellow link on the chain?

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  4 года назад +2

      You install the timing belt again. Yellow link is marker

    • @sergejpanov5543
      @sergejpanov5543 4 года назад +1

      @@PeterFinnTheCarDoctorCan you show us how to correctly replace a timing belt.

  • @aymanalsanousi4239
    @aymanalsanousi4239 3 года назад

    You are the best 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

  • @MoMo-ps6ks
    @MoMo-ps6ks 11 месяцев назад

    Very helpful !

  • @cck0728
    @cck0728 4 года назад +2

    Excellent. What is the purpose of 0 to 10 mark on crankshaft pulley?
    Thanks.

  • @danb2767
    @danb2767 4 года назад +1

    Are there any primary checks to do before ripping off the valvecover and do this? I guess there are some other checks to do before suspecting the timing has become offset when it is hardstarted? By the way, thank you for a very good lesson. Regards Daniel, Sweden

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  4 года назад

      Valvecover is must to open, because we must see the camshaft's top positions.

  • @mridware9694
    @mridware9694 4 года назад +2

    Peter i have yaris with 130,000 km and i have problem that when i ON AC my rpm goes to 800-850 then after 5 min it drops to 650-700 like we have when AC is off and on red light it drops to 550 and comes back to 700 but not return to 850 and when i restart the car the rpm stay 850 for 5 min only and i clean Throttle body and everything else

    • @applepoop10
      @applepoop10 4 года назад +1

      Clean out your IAC valve also known as your Idle Air Control valve. It helps maintain your idle speed depending how much load is on the engine.

    • @mridware9694
      @mridware9694 4 года назад

      @@applepoop10 my yaris don't have IAC valve its electronic Throttle body, ecm raise the rpm on load but after few minutes rpm drops to 680-700 even the compressor is ON

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  4 года назад

      Good comments Sirs 👍😃

    • @mridware9694
      @mridware9694 4 года назад

      @@PeterFinnTheCarDoctor what is your reply Mr Peter

  • @waynebaker4623
    @waynebaker4623 4 года назад

    Hello Peter im Wayne i love your videos and they have been really helpful to me rebuilding my motor for my 04 toyota carolla CE. My question for you is what do you recommend for me for this issue. My car idles roughly at a stop and it sucks up gas my car has new ignition coils and spark plugs. My car does have way over 299999 miles. Im thinking it could be my vails what do you think bud

  • @Ethiopic
    @Ethiopic Год назад +1

    I am a bit confused because in your other video you said, the yellow marks must match the small holes. In this video, the yellow marks do not match the lines (holes); and, you still think this is a fine position.

  • @thetruthhurtsmyselfincluded832
    @thetruthhurtsmyselfincluded832 4 года назад

    I love your videos, they are excellent.
    Could you do a video timing a 3ZR-FAE valvematic engine please? I can't find any literature on it.

  • @LocsGunna
    @LocsGunna 3 года назад

    So when you replace water pump on Toyota corolla you have to adjust the timing chain all the time ? Why would replacing the water pump throw off my timing chain?

  • @mariovasquez4727
    @mariovasquez4727 3 года назад

    Hi mr. Peter i wonder to know with this method can work also in chysler town country 3.6 pentstar engine,thankfully.

  • @scottiemurdaugh
    @scottiemurdaugh 11 месяцев назад

    Hello.. What will cause a no start on this engine if the timing is off.. Will the spark plugs not fire.. Or will the fuel injectors not spray fuel? I wasn't clear on why it would not start. Please advise.. Thanks

  • @jasondrollinger7314
    @jasondrollinger7314 4 года назад

    Is my Toyota engine shot the reason I am doing head gasket and then piston rings because I overheated the engine on freeway and in town a few times so can it be fixed or should I put it in trash

  • @sabelomasuku2847
    @sabelomasuku2847 5 месяцев назад

    Hi
    Does 1tr engine start when it got a valve problem

  • @guledmah5872
    @guledmah5872 2 года назад

    Is it english

  • @helderyoung848
    @helderyoung848 3 года назад

    I really confused 😕🤔😕 hahaha his accent,it not letting me got it.

  • @chee75
    @chee75 Год назад

    not help talk to much .

  • @mariovelazquez8125
    @mariovelazquez8125 Год назад

    Good job