P14/27. Timing Chain. How to Assemble Toyota Camry 2.4 VVT-i engine: Timing Chain

Поделиться
HTML-код
  • Опубликовано: 6 июл 2021
  • Next video: • P15/27. Crankshaft Gas...
    First video: • P1/27. CLEAN the ENGIN...
    Cadena de distribución P14. Cómo ensamblar el motor Toyota Camry 2.4 VVT-i: Cadena de distribución
    Timing Chain P14. How to Assemble Toyota Camry 2.4 VVT-i engine: Timing Chain
    Engine type: 2AZ-FE 2.4 and Toyota Camry 2004
    Disclaimer:
    These videos are intended to offer general information working a car and tools.
    The Peter Finn have used best effort in creating the video. No liability can be accepted by the author and publisher for any expense, damage or injury caused by any errors in the information given. In no event shall author be liable for any direct, indirect damages or loss of profit by you or any third party.
    Due to factors beyond the control, I cannot guarantee against improper use or unauthorized modifications of this information. Peter Finn assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Peter Finn.
    Work carefully and safely. Also avoid accidents.
  • Авто/МотоАвто/Мото

Комментарии • 99

  • @vongsakra253919
    @vongsakra253919 Год назад +6

    I remember I have part of you when coming to car. I watched your videos since day one.

  • @mohammadtaqi1396
    @mohammadtaqi1396 2 года назад +2

    Good job man all need it to put the chain on is to first put the chain on exhaust spracket then the intake and it will be perfectly in its place.

  • @user-df3gq8bq9q
    @user-df3gq8bq9q Год назад +3

    Thanks for your good work

  • @ditr257
    @ditr257 3 года назад +5

    Excellent, and very accurate job Peter! Please rotate the crankshaft or flywheel to make sure that everything is good!

  • @nerdbiscuit
    @nerdbiscuit 2 года назад +3

    Thank you very much for sharing. Much appreciated

  • @JuanDiaz-vm1pv
    @JuanDiaz-vm1pv Год назад +2

    Great job. Thank you so much!

  • @saulc5280
    @saulc5280 2 года назад +4

    Fantastic job on explaining the step by step process. I appreciate the information.
    Thank you!

  • @coulibalysouleymane9656
    @coulibalysouleymane9656 2 года назад +1

    Merci infiniment pour votre soutien merci beaucoup

  • @benardgesura9284
    @benardgesura9284 2 дня назад

    Nice work done 🎉

  • @usace69
    @usace69 2 года назад +1

    Thank you for helpful information

  • @Dmnlndr
    @Dmnlndr 3 года назад +2

    Thank you my friend it really helped me alot

  • @luismelendez1761
    @luismelendez1761 11 месяцев назад +1

    Excellent video Thanks and God Bless you.

  • @ecurbyhprum1043
    @ecurbyhprum1043 2 года назад +1

    Excellent tutorial

  • @harrybean2129
    @harrybean2129 Год назад +1

    Great job 👍

  • @user-nm5xy5li1n
    @user-nm5xy5li1n 3 года назад

    Thank you

  • @doubledgolfcarts4810
    @doubledgolfcarts4810 2 года назад +1

    thank you!

  • @consentidocomunwithcommons7698
    @consentidocomunwithcommons7698 2 года назад +1

    You are the best Teacher you are awesomely definitely suscribe ++++////those Toyota engine are made in perfection reliable for Few decades without any maintenance are very good engine. I’m a BMW tech and Toyota Too for more than 20 years driving both brand and working with them are the best engine “”” Now im with Tesla Technology I owned a Tesla S and now in the learning processes month by month are really simple really like plug and play all the rest is just software input “”””
    Awesome video “”””” great video “” I have plenty Trust in follow your instructions are great “

  • @mohammednaushad4356
    @mohammednaushad4356 Год назад

    It was a great help

  • @josefranciscoesquertalaman3827
    @josefranciscoesquertalaman3827 3 года назад +1

    Peter Finn, excelente video *Like !!!* saludos desde Sonora México 👍

  • @elias8073
    @elias8073 Год назад +1

    Woooh I always like you you are my sunshine thanks to you

  • @user-df3gq8bq9q
    @user-df3gq8bq9q Год назад

    Good job

  • @javierantoniomorro9956
    @javierantoniomorro9956 2 года назад +1

    👍👍👍

  • @fernandohood5542
    @fernandohood5542 3 года назад +2

    The bottom dot on the crank should between the orange tag or aligned to the bottom of the tag?

  • @alamshah1159
    @alamshah1159 2 года назад +1

    Good info bro.. even I'm not mecanic.. Im use toyota wish 2.0... 260k km. Until now I never change the t chain.. how many km need to change... Tq bro

  • @guabacot1691
    @guabacot1691 2 года назад

    Hai from Indonesia

  • @Peter-pv8xx
    @Peter-pv8xx Год назад

    They're called woodruff keys that are in the crankshaft.

  • @mosesbenedict8218
    @mosesbenedict8218 2 месяца назад

    After coupling there's sometimes a vibrating noise down the engine, can you do a quick video about that thanks.

  • @zane8004
    @zane8004 Год назад

    Should the Guide tensioner wiggle when install to 20 NM tighten?

  • @autocare3116
    @autocare3116 2 года назад

    Is good 👍👍👍

  • @mike75479
    @mike75479 3 месяца назад

    How to turn the crankshaft I’m installing the chain right now, I don’t remember if you mentioned but in this video is not showing

  • @Peter-pv8xx
    @Peter-pv8xx Год назад +1

    Is this an interference engine?

  • @fluke1172
    @fluke1172 3 месяца назад

    Has anyone ever tried m12x1.75, grade 12 bolts on a 2003 Toyota camry ?

  • @forthepeople8218
    @forthepeople8218 2 года назад

    Where did u set tdc? I’m confused

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  2 года назад

      Look markings

    • @michaelopere5424
      @michaelopere5424 2 года назад +1

      ForThepeople
      Tdc is easy to set. All you need is to set the linear marking on the crankshaft position upwards.

    • @seanedwards94
      @seanedwards94 2 года назад

      @@michaelopere5424 @7:16 I'm confused on how he turned the flywheel. If the engine is still installed how would you turn the crankshaft to get the markings facing up

    • @billclinton6040
      @billclinton6040 2 года назад +2

      @@seanedwards94 Just install the crankshaft bolt and use it to turn the crank.

  • @pov2617
    @pov2617 Год назад

    Hi

  • @mosesandrews4381
    @mosesandrews4381 2 года назад

    hi Peter, I'm having the hard time doing the timing on my scion tc, because the car is a coup I have to take the whole engine out every time. my cam gear seem to be coming out of time or slipping while under the chain before the chain finally gets to be tight enough to turn the gear with out more slipping. please help.

    • @danielmartinez1911
      @danielmartinez1911 2 года назад

      Did u resolved your problem? Do I have to remove the oil pan. Im doing the timing chain on a Scion TC as well. Thx

    • @mosesandrews4381
      @mosesandrews4381 2 года назад +1

      @@danielmartinez1911 you have to remove oil pan yes, I never got it fix

    • @danielmartinez1911
      @danielmartinez1911 2 года назад

      @@mosesandrews4381 so I took off the pan, and all bad .. big chunks of metal in there, and the bottom of the block by the oil pan has a cracked piece on it. Think this engines done

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  5 месяцев назад

      Thanks for comment 👍😀

  • @papybiancokiangalakibangu5572
    @papybiancokiangalakibangu5572 3 месяца назад

    Langue française interprétée

  • @YourName-vh1nu
    @YourName-vh1nu Год назад

    On 4:52 you only had issues because you installed the guide to soon you should've waited

  • @Z-Ack
    @Z-Ack 2 месяца назад

    But did you lock or unlock the vvti gear? When installing new gear it says to unlock and tighten but also says to lock then tighten but says to make sure it is full retarded or advanced. I dunno how to interpret the shop manual there..

  • @saiduabdullahi3871
    @saiduabdullahi3871 Год назад

    Saidu

  • @Hudoba4
    @Hudoba4 2 года назад

    Lets hope you’re not a flag tech

  • @yongxiong8568
    @yongxiong8568 2 года назад

    You dont no notthing too slow

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  2 года назад

      👍

    • @michaelopere5424
      @michaelopere5424 2 года назад +1

      Yong Xiong
      Your insults will take you nowhere .Dr Peter Finn the car Doctor has enabled me to learn alot of things about Toyota engines that i hardly knew about.His enlightening,inspiring,and educative videos have also given me the courage to rebuild my water ceased Toyota 2AZ FE engine.

  • @Wedoitalltohelp
    @Wedoitalltohelp 9 месяцев назад

    Terrible

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  9 месяцев назад

      Noted 👍

    • @Z-Ack
      @Z-Ack 2 месяца назад

      Ha. His name is we do it all to help.. but he’s an angry old asshole.. “terrible”. Sir you can say that about your wives cooking and her weight gains but lay off the guy actually doing stuff to help others.. .. and go sit on a thorn bush prick..

  • @ekohdsusilo4143
    @ekohdsusilo4143 17 дней назад

    👍👍👍👍👍