Это видео недоступно.
Сожалеем об этом.
3M PSA Lapping Films for the Work Sharp Precision Adjust Sharpener
HTML-код
- Опубликовано: 3 янв 2021
- Buy Work Sharp Precision Adjust here - amzn.to/3X8vGDQ
Buy Feathering Disc Adhesive here - amzn.to/3x0LLkg
Buy Lapping Films Here: amzn.to/44UgiAd
Buy 99% Rubbing Alcohol: amzn.to/42x6Roy
Buy Work Sharp Precision Pro Adjust: amzn.to/3nQCvi3
Email me if you need anything: sweetknives2020@gmail.com
------------------------------------------------------------
Best Knives On Amazon - amzn.to/3Z9lv4k
Best Flashlights On Amazon - amzn.to/3Z5ciKd
Best Knife Sharpening - amzn.to/3vEWss4
Top Amazon Products - amzn.to/3CjPcWG
-------------------------------------------------------------
-------------------------------------------------------------
My Amazon Store: The Very Best Knives & Gear
www.amazon.com...
-------------------------------------------------------------
-------------------------------------------------------------
Contact/Email: Please email before sending gear at
sweetknives2020@gmail.com
-------------------------------------------------------------
-------------------------------------------------------------
**As an Amazon Associate, I earn from qualifying purchases.**
Follow me on social media below:
/ sweetknives
/ sweet.knives
/ sweetknives1
/ sweetknives
-------------------------------------------------------------
Recommended Playlists:
Overall Top Picks
• Overall Top Picks
Flashlights
• Flashlights
Sharpening
• Sharpening
Benchmade Knives
• Benchmade Knives
Legends of the Past
• Legends of the Past
-------------------------------------------------------------
About me:
I enjoy spending time outdoors and doing everything from fishing, hunting, and hiking. I love all types of knives and sharpening them until they are razor, hair popping sharp. I also enjoy helping people better understand what knives are worth buying, and how not to get ripped off. On this channel I will be helping all of you take a look at different knives and other products that are useful and worth buying. I will also teach you how I sharpen knives along with reviewing some other awesome products along the way.
Thank you for all of your support :)
#sweetknives
#knifeunboxing
#knifereview
#knives
#knife
#pocketknife
![[155] Update on Work Sharp Precision Adjust Knife Sharpener - AWESOME IDEA](http://i.ytimg.com/vi/HWbnULCxB9k/mqdefault.jpg)
![[155] Update on Work Sharp Precision Adjust Knife Sharpener - AWESOME IDEA](/img/tr.png)
![Baby Kia - WYG (feat. LAZER DIM 700) [Official Music Video]](http://i.ytimg.com/vi/avlLsOH_oJc/mqdefault.jpg)
Buy Work Sharp Precision Adjust here - amzn.to/3X8vGDQ
Buy 4 Packs of lapping films via PayPal here - py.pl/1OnqzC
Buy 6 Packs of lapping films via PayPal here - py.pl/QN9YN
A $8 portable paper trimmer/cutter is great to easily cut the films to size. Also, the Scotch reusable double sided tape goes for $6 on Amazon and works better than the adhesive. Super easy to use and remove. That's what I've tried after watching your videos and works great. 👍🏻
Great tip! And for the rest of the world that doesn't want to cut these, they have another option now too. :)
send me a link to this paper trimmer/cutter please
Pro Tip: Use a sheet of wax paper. Better if you have the kind pre cut for burger patties but it’s the best thing to place an adhesive backed item on where it will keep it clean and sticky but the adhesive won’t “stick” to it. I’ve had to use it for sticky mounted phone cradles, cable stays, etc.
Thats an awesome idea
Great tip!
After watching you 2nd video on this system I pulled the trigger and bought 2. For me and my friend. Ty for the video.
Brilliant idea man! You beat the manufacturer to the punch!😎
I find for that squeal from the sharpening arm synthetic bow string wax works the best
WHAT YA GOT ''beepin'' ALL THE TIME IN BACKGROUND?
BEST KNIFE CHANNEL, EVER👍
Had me Looking around my house, like wth 😂
@@Hvac.tools_ Beep, beep, beep.....
Thank you for this info! It’s has completely transformed my Precision Adjust into a $600+ equivalent sharpener! With your tips I ordered the 3M adhesive as well as a 30-1 micron polishing paper set and cut them to fit. Man alive the finish on the edge after 1 micron is something else!! Keep up the great videos!
Glad you are enjoying the sharpening system.
I’m THAT guy. I got my strips and already polished a few blades. I must say. This is most certainly the quickest way to get this kind of edge. Thanks for the extras and the info.
Let me know when you need more and we will work out a special deal.
Ordered my psa paper yesterday. Can’t wait for it to come in
Who did you order from?
WATCH NEXT - ruclips.net/video/HWbnULCxB9k/видео.html
RECOMMENDED PLAYLIST - ruclips.net/p/PLxvf6ZIA1y9lAQhO0eI5OG1ocs_X_iwTX
BECOME A MEMBER OF MY CHANNEL - Click the blue "JOIN" button or this link - ruclips.net/channel/UCGLeXP0xhZFlk9O1oEfuXSgjoin
Lol I almost bought these films on Amazon earlier today... def going to cop now. Thanks for the idea to use on ceramic, I might try to buy another sharpener and convert the three abrasives to all ceramic with different films as a second set.
Glad I could help!
Just ordered the knife sharpener and I ordered some of your lapping films from your ebay store
Thinks for the link for the lapping film.
Great vid! Really anxious to try this out.. One question (maybe a stupid one) do you still strop the knife on a leather strop after using the lapping films? Or would that be like 1 step forward 2 steps back? Keep up the good work 👌
For me I like using 1×6 guided sharpening stones, just remove stone holder from rod,set 1×6 stone grit down on table, set stone holder to top edge of stone,and use a large binder clip with 1" capacity over everything shim between top of clip and stone holder. You will be using the top half of the 1×6 stone but it is faster than lapping film and you get more useable coverage.
The clip you can get at a office supply store. Its the one that folds over and the clip ends work as a handle.🤔🤔🤔🙄
Amazon has it: 3m feathering disc adhesive 08051type II, for 25 bucks for a 5 oz tube. For 20 bucks the same tube is at collisionservices.com (in the paint department for some reason).
Hey if you or anyone out there wants precut lapping film strips to use with that adhesive, I have those available as well as the PSA versions. Just email me.
1 micron is 22,000 grit not the 14,000 that you stated (that would be 1.5 micron), 12 micron is 1600 grit, 9 micron is 2100 grit, 3 micron is 6900 grit (massive difference from the 3000 stated)
Worksharp should be sending you free stuff or offer you a job 😂
These are absolutely fantastic!!
Thank you very much indeed for this transformative upgrade!! So, so pleased with mine!!
I have really struggled to get hold of the 3M feathering disc adhesive over here, but (after some trial and error!) found that the Bostik ‘Fast Tak’ works a charm for those in the UK (purchased on Amazon). I think any “repositionable” sprays will work, providing they are a more gentle adhesive.
Thanks again for the amazing upgrade, it has consistently given me the mirror polished edges I’ve been lusting after, for a very small amount of money compared to the other systems out there!
Awesome video! Thanks for the demonstration it was incredibly helpful!!!
Ive watched your vids on the sharpener&was impressed so I ordered 1..anyway I just wanted to say thanks your vids rock& I'm gonna be makin some adjustments to it cuz i have only 1 hand but if your interested I'll let ya kno. It should be here in a week or so.
Thanks for the message here, you will like it when it arrives, just take your time and your knives will turn out well.
They did an amazing job with this sharpener
Little bit to much play in it for me
@@theknifeconnection9571 compared to similarly priced sharpeners like the Lansky system?
Yeah lansky might be a tad better. Bet the kme is where it's at. I know it's to much for many ppl tho
I want to get some of the lapping strips from you. What’s the best way to contact you?
Great to know I can get these lapping strips from you already cut to fit the WorkSharp stones. I have on coming and I'm just getting into sharpening my collection of "folder". Been "free handing" on cheap stones then "stropping". I'll shoot you an email to getting the strips. Thanks.
Could I see an example of how you stow these films after removal from the ceramic ? I’m sorry if that’s dumb, I’m just not clear on how to safely store for reuse. I got my precision adjust yesterday and it’s already earning its keep.
The packs come with a little piece of grease proof paper to stick them to after use! I’d wholeheartedly recommend getting these (I got my precision adjust last week and have been using it with the lapping films none stop!!)
I just bought this sharpener because of these vids. Gunna play with it a bit then order your kit to make mirror edges.
It’s a good system and with practice you will do great on it.
Where'd you get one?
Man I wish it was back in stock already! 😩😩😩
So I have the upgrade kit that goes up to 800 grit diamond plate with a diamond polishing stropping attachment. My question is im assuming that tge lapping films are gonna be much finer then the polish qnd strop so is there any need to strop the edge after the lapping films or would that just be taking a step backwards as it would seem the lapping films are far finer then any strop even when covered in polishing compound.
Thanks for the great video! Are the PSA lapping films single-use or can they be removed and reused for several different blades?
I got two packs and I’m still using the first after doing about a dozen knives in a variety of steels. The adhesive had started to lose it’s stick on the coarser micron films due to slurry/dust getting underneath them (the higher grits are still fine) - though I have now given them a spray with some Bostik “Fast Tak” repositionable adhesive spray and they’re almost as good as new!
Thanks for the very informative video.
I think I saw where your friend is 3-D printing the triangular holders to put the lapping film on instead of using the one that comes with the gadget.
I’m ordering one of those sharpeners and then I’ll look into your lapping film.
Thanks again for that tutorial.
Yes I would also like to get. The per-cut lapping paper. Let me know how to go about doing so.
Buy Lapping Films Here: www.ebay.com/itm/203268715749
Buy Plastic Piece Here: www.ebay.com/itm/284171969596
@@Sweetknives thank you sir for getting back with me. This is going to be a great addition to my sharpening.
Great job pal.roughly how many times will one strip work.atb paddy
The strip will last 1-3 knives depending on how much attention the knife needs. Usually you can get 2-3 knives, maybe more if you need.
Got one for you take same knife Sharpen one to 600 and the other one to mirror finish and do a test to see which one last longer seeing if it’s worth it to mirror finish on it.
I have done that, the Mirror edge always lasts longer.
thanks for that video!!
is there any reason to not use water with the lapping film while grinding?
I really like your Work Sharp Precision Adjust videos. I just purchased one. I have a couple questions.
1. How much for your precut lapping plates?
2. What are the grits provided?
3. How many do you provide
I have a more technical question too. I just received a Mora Garberg. It is my understanding that is that it is a Scandi grind and has a micro bevel. Mora says they add it to strengthen the edge and recommend keeping it. Could you demonstrate how to determine the angle of the micro bevel and how to sharpen it using the precision edge. Work Sharp instructions state that the micro bevel should be 2 to 3 degrees but how do you do this using the Precision Sharp when it only goes down to a 15 degree angle? Thanks I love your videos.
The cost for the grit packs are $9.99 for one of each lapping film, or $13.99 for two of each lapping film. Regarding your other question, I have several Mora knives and yes I should do a video on how to sharpen them. The short answer is they are an easy knife to maintain and a slightly harder knife to resharpen. For most people I recommend using a leather strop the first few times or ceramic rods and leather strops to maintain it, most of the time you can get it back to ultra sharp with doing just that. If you need to resharpen it completely, then you can follow my upcoming video on it. :) Its too hard to explain here.
Work sharp means 2 to three degrees higher then the rest of the edge angle. Say the blade is a 22 degree angle then you would make your micro bevel 24-25 degrees
Thank you so much for this idea! I just got everything in and I'm having some trouble. Any tips for steels like S35VN? I feel like it's taking forever on each grit and it seems like no progress is being made. Just need more time on each grit? Trying to polish out a factory edge.
You are exactly right, spend much more time on the first stages with the diamond stones to establish a burr on one side. Once you establish a burr then continue with the same grit stone on the other side for a while until the burr changes to the other side. Once you have achieved that you can move on to the finer grits. This initial grinding could take 30 minutes on the coarsest grit.
......I am not able to purchase the sharpener for Malaysia, can anyone assist......
Do the lapping films you sell get the knifes more Sharp ? Then just the factory stone's it comes with ?
Yes, they get them a lot more sharp.
Have you tried to go up & down? Did you say your selling these precut?
I wonder how long this would take on CPM-M4
Ive just got this system and am going to try the lapping film method.Ok stupid question time,does the mirror edge actualy make the edge sharper or is it purely cosmetic?
It actually makes the edge sharper, this has been proven with some of the sharpness tests I do.
Any easy way to clamp/screw the worksharp to a work bench and have it more stable?
When I use my work sharp I use my free hand underneath the clamp with a knuckle on the base and three fingers holding the bottom on the knife. That way it doesn't allow any movement because it is cradled in your hand. I just reprofiled my CS Code 4 to 17 degrees and the edge looks completely professional. I did use a leather strop afterwards, I don't have these lapping films yet. I want them! Cheers!
Hi there,
Are the lapping films still available for sale?
How does the ceramic stone on the sharpener compare to your lapping strips, with respect to grit/microns?
The ceramic is approximately 1000 grit. The lapping films go way beyond that all they way to 40,000 grit.
new sub here. enjoying this series. will these work on the lansky stones if you know ? waiting for the worksharp to get back in stock. thanks.
It should work on Lansky if you have the ceramic or glass platen. You need the smooth surface for the PSA to stick.
How about a variety pack with a couple of each grit?
Description
I’m wanting to get a sharpening system for my edc blades. I’ve been stuck between this and the Lansky Diamond kit. I’ve had hesitations with the Worksharp because of its lack of stones. The Lansky just has so much more availability with the 1000 ceramic as well as the 2000 sapphire.
I feel locked in with options with the Worksharp, but this changes things. I just don’t like how this is somewhat of a temporary fix.
Do you recon that Worksharp will release more stones? What would you recommend?
If you can swing the kme ulll be way happier
I have both
@@theknifeconnection9571 I wish I could, just not looking to drop that kind of money. It seems like using the sandpaper to mod the woorksharp is going to add up in price over time which brings it near the diamon lansky.
If you think about it. For the rspv or whatever the letter configuration is. Just add 100 bux and I'll be alot happier
Not sure on the more stones but you can get these lapping films and thats the way to go, regardless of whatever they come out with.
what angle do you use for your edc knifes
Usually use the factor angle that came with the knife. But 18-24 degrees per side is a usually good.
If you look closely, you actually missed the cutting edge!
Whats the difference between a 600 grit sand paper vs the 600 grit lapping and so on?
Great question, the 600 grit sand paper is Silcone Carbide the lapping films are Aluminum Oxide in my video (they do make Diamond ones but those are spendy). The Aluminum Oxide produces a superior finish I think on various knife blades. So to sum it up, if you use 600 SC are on a blade and 600 Aluminum Oxide on another, you should get a slightly better finish on the blade with the Aluminum Oxide.
Im a sharpening noob. What is the point of the film? are you trying to mirror?
How do I order some
Do you still have the kits? I sent an email and didn't get a response.
Great video.
I had forgotten to mention the psa films, I had assumed you had looked into them....proves the point of making assumptions....lol
Are the films diamond, alumina oxide or silicon carbide?? I ask because 3m makes all three varieties. Once you look at the prices in sure you had same reaction I had several years ago....we as sharpeners were getting raped by prices.
Example a certain manufacturer is selling 5 pieces of 4x1 films for $15 that's $3 per strip using that supplier I had told you about my cost breaks down to $.16 big difference.
When the films load up you can clean them with a touch of rubbing alcohol. This gives you some extra life per strip. Also the adhesive will most likely begin to weaken, you can use the 3m adhesive you had used previously or try some of their spray adhesive such as super 77 spray a bit on film..spread with finger and let sit few min. Will begin to have the tacky feeling. Only shortcoming with this is you will need clean the ceramic stone to remove adhesive.
Keep up the great content.
The ones I am using in this video are from 3M and are Aluminum Oxide. I do have access to the Diamond ones but for the cost its outrageous. Feel free to email me if you are able to get discounts from your supplier. :)
@@Sweetknives it's the same supplier I had told you about earlier....rs hughes you will need buy a case...but when you look at the prices being charged it's still a huge savings....especially if your running a sharpening service.
Years back the company I worked for was a licensed 3m converter and distributor.
When they sold out and I had my accident I lost my connection so I contacted my old 3m rep and he put me in contact with mentioned company.
I know there is some initial sticker shock with prices....but once you do the math you will see what I have been saying for years.
I normally buy 9x11 sheets and cut down to various sizes either 4x1, 6x1 etc depending on what system I'm using.
@@fldiverjc4496Thanks for the info, yea, WickedEdge did the math and they charge $30 for 10 or so strips of the lapping film. The problem is the average person is not sharpening very many knives but then again its good to know various options out there. Thanks.
@@Sweetknives very true, but the average knife guy also isn't in the market for lapping films either....lol
When you factor in the longevity of each strip....even if your the average user it still makes sense. One case could theoretically last you several years or longer.
I know how I look at things can be slightly warped...lol
It's not just wicked edge raping customers over the films....they all do. Look at kme or even jende the prices are ridiculously high....
I had justed wanted to share via my experience over the years. If I can save guys money that's great.. but at least try to get the info out there...then maybe said companies will realize the cats out of the bag so to speak and bring their prices to a more realistic level. I fully understand that business is business...but those prices are hidious at best.
When you can pay roughly sixteen cents per strip as opposed to three dollars the mark up is retarded
@@fldiverjc4496 Tell that to the pharmaceutical companies ripping people off for prescription medications. Everything is over priced these days. But all in all I agree with you, the prices should be less.
I want one of those worksharp systems. I also want the belt sharpening system from Worksharp. I will use the Worksharp knife and tool sharpener for bigger things like mower blades , axes hatchets and machetes.
I have both and use the Ken Onion work sharp for my convex blade needs.
Show us how to cut them bro
Hi I'm interested in one of your lapping bundles for my worksharp persicon adjust sharpener what is the cost
What’s your email address and I’ll send you the info?
Any idea when this sharpener will be back in stock?
I just got one from sharpening supplies .com for 49.99 USD. Try them.
@@jacknemo8021 Yeah they're website shows 3-4 weeks now
@@brysonhollar bummer, got mine just in time. All I can say is worth the wait as it is a good value for money. You do have to hold the base, but I do any way so....you could use a clamp I suppose.
What currency?
I wish you would of cut some phone book paper nothing like hearing the sound of a sharp knife going through that paper.
Next time I will cut some paper. I have some old videos of me cutting paper, people didnt like those so much. :)
Where are you sending the invoices?
Where can i buy a sharpener like this please?
Go to Amazon
@@paulmyers9620 i did, sold out, thanks
They are back ordered and are expected to get more in any day. My recommendation is to check Amazon daily or the Work Sharp Website, they have links to a couple suppliers there as well.
@@Sweetknives much appreciated and when I do get one. I'll contact you through dm on Instagram. My Instagram is warriorbuliwyf. I gave you a follow there
@@paulmyers9620 sounds good thanks
Is those even better to Sharpen like samurai sword Sharp?
Only if you are a King. :)
Do you still sell these strips?
yes.. just email me if you havent already, sweetknives2020@gmail.com
Just buy a wicked edge, with this you are constantly flipping the knife over and over cutting and pasting like it’s arts and crafts. Wicked edge pro cost twice the deluxe model but is well worth it. My 2 cents
A lot of folks cant afford the Wicked Edge so this is a great option for those folks. If you are able to spend a little more and want more of a professional sharpener, yes, the Wicked Edge will work great.
How do I order?
by sending email to sweetknives2020@gmail.com
Worksharp definitely needs a profile grinding stone for this system .
Their diamond 320 will reprofile powder steel but don't expect more than two knives worth out of them.
But thats not their purpose I get it ..For basic sharpening they work fine.
I'm also noticing their 600 grit don't last long at all .. The dust came off very fast on mine.
That said with a simple bit of rigging you can use their sharpener to reprofile blades esp non powder steel. . 1095HC and others will work awesome on this tool.
Watch for the "heavy duty" version soon just like the Ken Onion... It will have everything this one should of had but also strange design flaws???😏
These guys are the nintendo of the sharpener world and are hooking in users while giving them the next best thing in slow drips.
I freaking hate companies that do this cause they are purposefully dumbing down their product just enough to need updates which they say is through customer feedback...BULLCRAP.
I used mine for 10 minutes and instantly could see where things need improved . .. NO WAY their design guys miss this crap.
Oh well that's the free market for ya and I bought one just like the other ones 🤪 Just seeing a pattern here.