1968-69 Camaro Firebird How to install and adjust rear Quarter Glass By Scared Shiftless
HTML-код
- Опубликовано: 18 май 2018
- 1968-69 Camaro and Firebird Part 6 How to Install and adjust rear quarter glass with ease! Without this tip you can spend hours. Put the regulator in last. Use the 7 slots to your advantage. Knowing the tips and little tricks is very helpful. Watch Mark Boice with Scared Shiftless Rides and Wrecks explain and shows how easy it could be. It looks simple! However it could take several hours even with the tips and tricks!
Авто/Мото
Thank you for putting this video and the others out there for the 68 Camaro glass, I dismantled mine 4 years ago for a restoration. Just got all my glass done today, couldn't have done it without this. Awesome!! Thank you
Ive used watched these videos several times while doing a complete build of new and used parts from ground up. Couldnt have finished without these great sets of videos! Thanks
Your Welcome! Thank You for the comment! Mark
This is the best instruction I've seen for this job.
Thank you from San Diego Mark, this video, was instrumental for my install. KEEP THE VIDEOS COMMING.
Just put a new quarter window in my 68 Camaro. This was a huge help. Thank you.
well it did not take me 11:00 to tackle this,but with out this tutorial,i would have never have done it,took me 30 instead,thanks for all your videos,Thank You!
Thanks a bunch for this whole series. It was incredibly helpful for installing the regulators, tracks, and getting the glass aligned. Can’t thank you enough!
Thanks Mark for sharing. Incredibly valuable and pedagogical.
Your are true genius! Your videos are far better than any installation book.
Thank You
This video saved me a lot of time sir, and i thank you! My 68 has been apart for 5 years and now putting goodies back together.
Thank you so much for this helpful tutorial and for sharing your knowledge!
Went through the assembly manual 4 times and nothing about glass installation and to be honest was quite nervous! This made it very simple and quick!
Awesome Videos!!! Really appreciate how you show every step (no magic fades to being finished). Again GREAT VIDEO!!!!!
Thanks for making this video. I'm installing my quarter glass today
Excellent video. It was very helpful in the rear window component install.
You saved me so much time! Thankyou so much for putting out such a great video. The video was very informative with the step by step process
High FIVE! You just saved me a lot of grief. I have been working on the interior of the wife's '68 Firebird convertible, and finding those little rear windows to be a major challenge. I taxed my grasp of profanity considerably removing them, and expect the balance of the process to be smoother thanks to your skillfull presentation.
The wife and I are differing as to whose toy is cooler, the '68 Bird she inherited from her father, he having purchased it new during the Summer of Love, or my '59 Ford ton-and-a-half. Both are candy apple red and we refer to them as Little Red and Big Red respectively. Drop by my site for the latest on these two family projects, and thanks again! "Uncle Tony's Shop Talk"
Thank you for sharing this it helped me understand
Thanks again Mark! You are the SoCal Man!!!
AWESOME video!! Great job explaining it!
Great video. Thanks buddy
Installing mine this weekend on a 69 camaro. Great tips, thanks.
Tks for the video great detail
Procedure very helpful. Thank you. Roger
Thanks for sharing the info. Everyone needs to know that the Assembly Manual does not contain everything you need to know. There is also a Fisher Body Manual, that holds the info for door, deck lid, and window adjustments.
You ain't wrong on how much time it takes the first time. I put in a solid 5 hours on just one side. :)
Thanks for your time. Liked and subscribed
Thanks bud, Next time I'm in your area, I'll drop off some cold ones.
Great video! I'm down to all the details like windows and interior on my 68, and rely on videos like yours. Keep them coming. Also Would you be able to tell me what size tire and wheel you are running in the rear? It looks killer!
I did mine 15 years ago with no instructions. Although I got them to they line up well, they never operated smoothly throughout the whole range. Now I got another thing to ad this to my to do list.
Good stuff
thanks for the info my 67 needs rear regulator believe it or not its the one from factory can not complain
Thanks for all the good advice actually I'm working on a 67 comaro install all wind up glass . The vent windows are market the run channels have a rubber seal with a felt cover that was coming apart in the box.. the originals can't be used .dry rotted but I can make everything work correctly with them in the car. Or by pulling the aftermarket seal out of the run channel I see I can order separate run channel for each side any advice or suggestions would be greatly appreciated
We need you to do one on power windows..
Need Part #6 in the title please. Super info thank you
Nice to the te
How can you move the glass straight back about 1/4 inch? Its barely touching the weatherstrip.
great video, how about putting in a power window regulator ? does it go in after also? i can't get mine to fit in with the window there
You have to power jump it to get it at that angle he has the manual one at..
So I have been doing thees since the early 80's. Great job on the videos both door glass, and quarters. My question is have you found re-pop glass that actually fits well? I so what brand is it?
Bob at Classic auto glass is probably the best. However still not as good as the original.
@@MrScaredshiftless and here I was all excited thinking somebody found a good glass kit for first gen Camaro.
Is this way applies to 68 buick skilark ?
hi i need to know how is the quarter glass molding is attached to the glass, is there some type of adhesive nobody around here really knows and your so good on those windows i figured you would know. thanks scared shiftless
Originally it took glass tape. This is a rubber like materiel. It is the same material as used on the vent windows on many vehicles. 1967 Camaro has vent window. Hope this helps with your search. Great question! Thank You.
What about the spring on Q glass
What wheels are those?
It seems to me both videos, door and Quarter glass each assume the other is correctly adjusted, and you are adjusting one to the other. A sort of Chicken or the egg.
Where do you start when both glasses are going in new?
Let me answer my own question. After several hours, and sleeping on it, I think the best approach to adjusting the glass and quarter glass in the same session is to adjust the door glass against the front edge seal, and across the top. The adjust the quarter glass against the door glass.
Hello. Are you, or anyone else, also familiar with the 68-72 Nova rear quarter windows? I’m having a hell of a time getting mine to work. All new channel, new guides, new glass. I CAN NOT get it to even begin to roll down straight. HELP! PLEASE! ANYONE!
What’s the color called? And do you happen to have the color code?
Not sure what the color is or code.
The code is ...PICKYOUROWNDAMNCOLOR