Great video.. These do work with limited capacity.. Not true three phase as more like two phase with time limited three phase capacitor output.. Once the machine is up and running the three phase motor runs technically on 2 phase only once the capacitors are depleted of power.. Confusing I know but think of them as rechargeable batteries that recharge when the Clark PC is on standby. If like me you have a Lathe with a Dual Speed motor then this is of no use because the five wire harness in such machines has a blue neutral powered wire in your motor that has to connected to enable brake/stopping of the motor.. If you leave it disconnected then on powering off the motor it will run on for quite some time until it eventually stops.. NOT Ideal if you plan using a mill, band saw or in my case a lathe and certainly not safe in case of needed emergency stop. If however your machine has a manual brake system then you could use the Clark PC convertor with caution.. Bonus is you can plug n play using this convertor without severe wiring modifications to the machines safety switches i.e safety guards, opening doors etc that disable the machine when lifted or opened.. Pro's and con's to all these set ups..
Hi mate, Thanks for your explanation. I am in the process of getting a haas mini mill, which requires 3 pahse power, what do you recommend in such case? Thank you
IMPORTANT FOLKS ! Before we all get excited about having a 3 phase supply please read on. These converters don't provide a genuine true 3 phase supply, but will run 3 phase MOTORS .. They are unsuitable for heaters , welding machines and other such devices.. They are only suitable for motors. One phase they provide is the true single phase from your wall socket . Clever phase shifting circuitry provides and second and a third by charging up capacitors when you switch on and then discharging the current around the third winding on the 3 phase motor thus starting the motor to turn. By the time the capacitors have discharged that third motor winding is now doing nothing but the motor continues to spin on two phases ( the 'true' phase and second 'trick phase'.) The motor will run quite happily on this arrangement but obviously at a reduced horsepower due to one phase winding of the motor doing nothing.. They are good devices enabling you to buy up great value 3 phase powered machines that sell cheap on the second hand market when commercial users sell them on replacing them with new plant that can be put against tax.. If you didn't understand the science earlier, just remember that these static phase converters will ONLY RUN MOTORS.
@@inflationistransitory Yes, any resistive load. This will include any heating elements .. A static phase converter is only suitable for running 3 phase MOTORS. Nothing else.
Ive bought three face sewing machine last August, since then I’ve been waiting for few different commercial electricians. Non of them fond a solution. Im very very that i saw this video which i think fond me the exact thing im looking for since last year. I thank you.
... if i see correct, this is a transformer that steps up from 230 to 415 volt( loadless) ~400 with full load. Plus 30 condensers to create the 3rd phase... Isnt more easy to create as many machines have a 230v 3phase with just one condenser (~4μFarad). For many machines its enough to work, because the speed is in any case related to the 50 hertz... Better would be a device that creates 3P- 1N -1PE...?! But i guess you need a generator like for old elevators ( 1 1phase motor drives a 3 phase generator)...
Sounds fantastic. Thank you for the simple overview - I just discovered these and was very curious but thought "it can't be that simple". It seems it is! This changes everything....
Thanks you! Watching in 2021 and I got a 3 phase sewing machine which was perfect but at the time of purchase I didn't read the description, now I'm stuck with my machine and you just gave me the perfect solution. Now I have to find out if they ship to Italy and if I can afford it.
YOU ARE AWESOME I HAVE THREE MACHINES SITTING IN MY BARN BECAUSE I WAS TOLD I NEEDED A MOTOR GENTERATOR SET CONVERTER THIS MACHINE WILL BE SO MUCH EASIER TO USE THANKS SO MUCH
I really like the intro! In germany we don't have that problem, as basically every house already has one (if not multiple) 3 phase power outlets :-D Anyway, I enjoyed the video and look forward to your next one.
Hi Paul, I glad you like the new intro! I've got a bit more work to do on it! Your very lucky! I wish i had 3 phase power. In the UK It's very uncommon
Thanks for the video Sean. I'm building a new workshop next year so I looked into 3-phase power for possible future machinery. Cost to bring 3-phase to my home = $ 1,000,000.00 CDN (conservative estimate by an expert). Nearest source of 3-phase is 6 kilometers away. So ... that ain't gonna happen. There are always options.
Nicely done Sean 😁👍. I've lost count of how many great machines I've looked at buying but then been hit by the three phase demon 👹. This could be a solution. Thanks mate 😁👍.
HI Frank, yeah it's great getting old machine. (normally much better made). before buying i would get that the converter works with the types of motor in the machine.
Thanks for sharing this- I need the one in reverse I need a 380/3 phase to work in 220v single phase for my large mixer. I assume it would be in the same concept. 👍 Thanks a lot . I learn quickly. ✅
bloody hell, can't believe you watched my video! thanks Elliot! I'm a big fan of yours. I love playing tennis as well and that's how i found you on RUclips. but I would also love to see more Bear Grylls impressions... there absolutely hilarious.
If you just want to run only one three phase machine on one phase, you can do it by using a capacitor, instead of buying this converter. For example, I have a 3 phase water pump at home and I use a capacitor for it
Thanks for this video. It's simple and short. I have a 7.5kva 3 phase equipment but the highest Clarke has is the Clarke pc60 which is 5.5kva. How do I go about this please?
Hi, thanks for the info just I need help with a couple welding machines. I have an millet XMT 456 that uses 19.2 kw 3 phase. Please help, I don’t have 3 phase. Thanks
Yes. You can only have the power that a single phase line can bring you. When you don't overstep the limitaton, a solution like this might be ok, but it not a full replacement of a 3 phase line.
Hi Sean I’m having problems with my inverter. Keeps showing fault. But I have to get an electrician to clear the inverter. But on watching you video I like the converter but would this be a short term fix. Thanks Sean
Nice one I have a silent generator 15kv single phase and I have MO 1unit printing machine can I use your Machine to power my 3phase MO 1unit machine? And how much is the cost?
Has anyone used a phase converter to power a 3phase welder or plasma cutter and is it possible? Im just looking into this as im also limited to 240v. Any advice is appreciated thanks
Blue neutral wire on 5 pin connection is a powered wire for brake/stopping the motor.. The Clark pc40 or pc60 won't work in that setup.. Simply put you can only connect 4 wires.. If you leave the blue neutral disconnected then the motor will spin a very long time to eventually stopping when you switch off.. Not ideal on saws, mills, lathes etc with no manual brake stop..
Hi man, I'm not a electrician. I'm pretty sure it puts out proper 3 phase, it can power a lot of 3 phase machinery. But you might need to ask the company if your unsure on technicals
@@SeanEvelegh Its not true 3 phase.. the machine you have imitates it just enough to start and run 3 phase motors. Thats why the output is rated in HP and not kw.. you cant power 3 phase space heaters or welders etc .. Powering 3 phase motors is relatively easy when you got something like that.. welders on the other hand.. no even with stuff like rotary phase converters or static converters.. welders torch them over time
to be honest, three phase is for much bigger workshops as they have a bit more power and more energy efficient. so you don't need it, and I have since changed my table saw to a single phase one.
Would this work for a more powerful motor? Say you have a 5 hp 3 phase motor. Could you set this controller to 3 HP and have it run the 5 HP motor? I realize that the motor couldn't put out 5 HP, but would it still run at 3 HP? I have a 5 HP 3 PH motor but I don't need that much horsepower. If this unit would run the motor at 3 HP that would be just fine.
Hey mate, I know exactly what you are saying. however I'm not an expert so sadly I cannot help. I recommend emails clarke and the tool company would definitely be able to help.
That machine spinning up didn't sound like proper three phase. Motor should start much faster than that. Have a look at my 3.phase shredder here and hear how fast the startup is ruclips.net/user/shortsHuJwUg_Tjrg If you are really getting three phase from a single phase, it must be pulling one huge current on the phase. Not ideal. I'd just get proper three phase in the first place.
American electrical system is so inferior and outdated. In most European countries all buildings (even small homes and apts) get all three-phases 230/400V i.e. 400V between phases, 230V between phase and ground.
It's all about need here in the states. On a main road such that I live on, 3 phase is readily available. On a secondary or back road that my parents live on, single phase is all that's needed. Makes no sense to run extra lines to places that won't use it.
@@the_real_hislordship I can only speak for my region of my state, but as far as our power supplier is concerned, it's cheaper to run one single phase line than it is to run three lines on back roads. The setup requires different construnction on the poles themselves. I suspect it might not be so much of an issue if they just burried the lines like any sane person would expect. 🤣
OMG....Nooooo PLEASE Read any "old" electrical motor wiring hand book you can jst add a CAP and change windings on main input and just run on single phase 220V with capacitor......!!! Go On How Much Then?...plz?.
NOT TOO Mention that a 220VDc P/M Motor has 3Hp and runs on only 4AMPS @220VAc.....mmmmmm standard plug and 1/3rd the size and weight...pmsl...lol BUT...OK?.
![[TF2] The Russian Bear Trap](http://i.ytimg.com/vi/YFNSwz2_rOA/mqdefault.jpg)
Great video.. These do work with limited capacity.. Not true three phase as more like two phase with time limited three phase capacitor output.. Once the machine is up and running the three phase motor runs technically on 2 phase only once the capacitors are depleted of power.. Confusing I know but think of them as rechargeable batteries that recharge when the Clark PC is on standby. If like me you have a Lathe with a Dual Speed motor then this is of no use because the five wire harness in such machines has a blue neutral powered wire in your motor that has to connected to enable brake/stopping of the motor.. If you leave it disconnected then on powering off the motor it will run on for quite some time until it eventually stops.. NOT Ideal if you plan using a mill, band saw or in my case a lathe and certainly not safe in case of needed emergency stop. If however your machine has a manual brake system then you could use the Clark PC convertor with caution.. Bonus is you can plug n play using this convertor without severe wiring modifications to the machines safety switches i.e safety guards, opening doors etc that disable the machine when lifted or opened..
Pro's and con's to all these set ups..
Hi mate,
Thanks for your explanation. I am in the process of getting a haas mini mill, which requires 3 pahse power, what do you recommend in such case? Thank you
IMPORTANT FOLKS ! Before we all get excited about having a 3 phase supply please read on. These converters don't provide a genuine true 3 phase supply, but will run 3 phase MOTORS .. They are unsuitable for heaters , welding machines and other such devices.. They are only suitable for motors.
One phase they provide is the true single phase from your wall socket . Clever phase shifting circuitry provides and second and a third by charging up capacitors when you switch on and then discharging the current around the third winding on the 3 phase motor thus starting the motor to turn. By the time the capacitors have discharged that third motor winding is now doing nothing but the motor continues to spin on two phases ( the 'true' phase and second 'trick phase'.) The motor will run quite happily on this arrangement but obviously at a reduced horsepower due to one phase winding of the motor doing nothing..
They are good devices enabling you to buy up great value 3 phase powered machines that sell cheap on the second hand market when commercial users sell them on replacing them with new plant that can be put against tax..
If you didn't understand the science earlier, just remember that these static phase converters will ONLY RUN MOTORS.
When you say heaters, does this mean boilers in 3 phase coffee machines ?
Well said
@@inflationistransitory Yes, any resistive load. This will include any heating elements .. A static phase converter is only suitable for running 3 phase MOTORS. Nothing else.
Ive bought three face sewing machine last August, since then I’ve been waiting for few different commercial electricians. Non of them fond a solution.
Im very very that i saw this video which i think fond me the exact thing im looking for since last year.
I thank you.
Well spotted tool info...didn’t even know you could buy such a converter....thank you Sean 👍🏻
HI Stuart! I'm thrilled you found it useful! that's exactly why i wanted to make the video! see you in the next video!
... if i see correct, this is a transformer that steps up from 230 to 415 volt( loadless) ~400 with full load.
Plus 30 condensers to create the 3rd phase...
Isnt more easy to create as many machines have a 230v 3phase with just one condenser (~4μFarad).
For many machines its enough to work, because the speed is in any case related to the 50 hertz...
Better would be a device that creates 3P- 1N -1PE...?! But i guess you need a generator like for old elevators ( 1 1phase motor drives a 3 phase generator)...
I think you’re the only one who can help me bro , I really need to ask you couple questions if you don’t mind please .
Sounds fantastic. Thank you for the simple overview - I just discovered these and was very curious but thought "it can't be that simple". It seems it is! This changes everything....
Thanks you! Watching in 2021 and I got a 3 phase sewing machine which was perfect but at the time of purchase I didn't read the description, now I'm stuck with my machine and you just gave me the perfect solution. Now I have to find out if they ship to Italy and if I can afford it.
I’m having the same problem
YOU ARE AWESOME I HAVE THREE MACHINES SITTING IN MY BARN BECAUSE I WAS TOLD I NEEDED A MOTOR GENTERATOR SET CONVERTER THIS MACHINE WILL BE SO MUCH EASIER TO USE THANKS SO MUCH
Didn't know this was possible, opens up possibilities...like your intro
Hi Rob! Thanks for watching man! I'm very happy i showed you something new! and i'm glad you like the intro... it took some time to do!
I really like the intro!
In germany we don't have that problem, as basically every house already has one (if not multiple) 3 phase power outlets :-D
Anyway, I enjoyed the video and look forward to your next one.
Hi Paul, I glad you like the new intro! I've got a bit more work to do on it! Your very lucky! I wish i had 3 phase power. In the UK It's very uncommon
Thanks for the video Sean. I'm building a new workshop next year so I looked into 3-phase power for possible future machinery.
Cost to bring 3-phase to my home = $ 1,000,000.00 CDN (conservative estimate by an expert). Nearest source of 3-phase is 6 kilometers away.
So ... that ain't gonna happen.
There are always options.
Hey man! yeah exactly, that is way to much money! hopefully this was helpful. but you still can get powerful machinery with 240v 16amp!
Nicely done Sean 😁👍. I've lost count of how many great machines I've looked at buying but then been hit by the three phase demon 👹. This could be a solution. Thanks mate 😁👍.
HI Frank, yeah it's great getting old machine. (normally much better made). before buying i would get that the converter works with the types of motor in the machine.
Thanks for sharing this- I need the one in reverse I need a 380/3 phase to work in 220v single phase for my large mixer. I assume it would be in the same concept. 👍 Thanks a lot . I learn quickly. ✅
You need single phase from a three phase supply?
Isn't there a neutral on the supply?
Any phase to neutral will give you the voltage you need.
Thanks bro, you have eased a lot of my stress, thanks again.
no problem
Good work mate! You're very talented. Subscribed. Keep it up!
bloody hell, can't believe you watched my video! thanks Elliot! I'm a big fan of yours. I love playing tennis as well and that's how i found you on RUclips. but I would also love to see more Bear Grylls impressions... there absolutely hilarious.
Thank you I really needed this info😎👍
You can buy these smaller than a shoe box with variable speed control for under $200 USD.
Thats great. I love old tools
Hi Matt! thanks for watching! yeah good tools are normally made very well! And it's a lot of fun using them
Great shout Sean although I think that bandsaw is getting in your way maybe you should send it to me 😂
Hi Dave! glad you liked the video! Not the big one! haha at some point i'm going to need to get a bigger bandsaw! see you in the next video
If you just want to run only one three phase machine on one phase, you can do it by using a capacitor, instead of buying this converter. For example, I have a 3 phase water pump at home and I use a capacitor for it
tell me more please ???
Thank you so much
hi. thank you v .mutch i think this could help alot of people .i wish i could tern the clock back .lignator jack.
Thanks for in4
Hi buddy this is fantastic video and very very useful for me. Am in India and I wanna buy this product hence request you to share link to buy
www.machinemart.co.uk/p/pc-40-3-5hp-phase-converter/
I have a Hobart 3 phase DC welder. I wonder if this would work for me and make for smooth welding?
Thanks for this video. It's simple and short.
I have a 7.5kva 3 phase equipment but the highest Clarke has is the Clarke pc60 which is 5.5kva. How do I go about this please?
Mantap boss👍🏻
Provided you don't exceed the rating of the Phase Converter, could you run more than one machine off a Phase Converter, simultaneously?
Will this work with a 120v outlet in the US or is there a different converter available in the US? Awesome find my friend.
HI Nate. I don't think this one will. but I'm sure if you looked at dealers in your country there will definitely be a version for you.
@KelMaster Construction yeah they are a lot of money, but cheaper than installing 3 phase into your workshop
NO, you need 220v to get 3 phase power. 120v will not have enough amps to run it
@@JB-vc2wl America's 120v is actually one leg of a 240v, centre tapped supply.
You'll find 240v across the two end taps.
With this being 3.5hp max.. Would it power a bandsaw which had 4hp input and 3hp output?.... Bit confusing that bit
Hi, thanks for the info just I need help with a couple welding machines. I have an millet XMT 456 that uses 19.2 kw 3 phase. Please help, I don’t have 3 phase. Thanks
Does using the converter have any affect on the power of the saw?
Hi William, that's a good question. It persume it might a bit. but i haven't noticed an issue (yet)
Yes. You can only have the power that a single phase line can bring you. When you don't overstep the limitaton, a solution like this might be ok, but it not a full replacement of a 3 phase line.
Hi Sean I’m having problems with my inverter. Keeps showing fault. But I have to get an electrician to clear the inverter. But on watching you video I like the converter but would this be a short term fix.
Thanks Sean
Hi Allan, honestly I'm not an expert, I don't know, so I don't want to give bad advice. I'd recommend chatting to a electrician.
Hi Sean, I bought a pahse 3 saw 5 bhp and a Clarke pc40. Unfortunately it didn't work for me. What bhp is the machine you used the pc40 on. Cheers
Nice one I have a silent generator 15kv single phase and I have MO 1unit printing machine can I use your
Machine to power my 3phase MO 1unit machine? And how much is the cost?
Great video.
Would this work with a machine that has multiple motors that run at the same time like a cnc machine?
Sorry Mark, I don't know about that. I would contact Clarke or machine mart.
So this would work for a 3 phase Cnc mill?
I bought brother automatic industrial machine ,but motor is 3phase ,so can i use this phash converter ,if i i buy this product ?
Has anyone used a phase converter to power a 3phase welder or plasma cutter and is it possible? Im just looking into this as im also limited to 240v. Any advice is appreciated thanks
I have a 3 phase welding machine will it work
Hey im planing to buy a cnc machine but run in to 3 phase do i can do this with that
Could this power a 3phase car hoist?
ALSO WANTED TO ASK WHERE YOU GOT YOUR PLUGS AND RECEPTICALS FOR THIS MACHINE?
stop shouting
Once you have used a Wadkin nothing else will do.
i need it other way 3 phase to 1 phase
Does anyone one of a product like this with plug and play ability for the USA?
Anyone know if they sell these on the Australian market?
What happens if your machine has a neutral lead requiring a 5 pin plug?????
I WOULD LIKE TO KNOW THIS TOO
Blue neutral wire on 5 pin connection is a powered wire for brake/stopping the motor.. The Clark pc40 or pc60 won't work in that setup.. Simply put you can only connect 4 wires.. If you leave the blue neutral disconnected then the motor will spin a very long time to eventually stopping when you switch off.. Not ideal on saws, mills, lathes etc with no manual brake stop..
Does this work on USA as well?
I've heard that these don't put out "true" three phase and it's actually two phase, can you confirm this? does it matter?
Hi man, I'm not a electrician. I'm pretty sure it puts out proper 3 phase, it can power a lot of 3 phase machinery. But you might need to ask the company if your unsure on technicals
@@SeanEvelegh Its not true 3 phase.. the machine you have imitates it just enough to start and run 3 phase motors. Thats why the output is rated in HP and not kw.. you cant power 3 phase space heaters or welders etc .. Powering 3 phase motors is relatively easy when you got something like that.. welders on the other hand.. no even with stuff like rotary phase converters or static converters.. welders torch them over time
230v inverter will be more compact. This look way to big for that job
Bro on the video u plugged ure inverter on a 3 phase looking plug point .is that so ?
What he plugged it into, was a high current, Single Phase socket.
m.media-amazon.com/images/I/71Gbz2in6qS._AC_SL1500_.jpg
Mister Sean, could tel me where I can bay this ? Thank
MachineMart.com
Do you or anyone else reading this really think you need a three phase motor for a machine if the machine comes in either single phase or three phase?
to be honest, three phase is for much bigger workshops as they have a bit more power and more energy efficient. so you don't need it, and I have since changed my table saw to a single phase one.
Wish I had free phase power 🤦♂️ power bill keeps going up and up.
Hey Sean,
Can I use this converter to power a 3 phase large heat press for pressing images on clothes.
Hey mate, sorry I can't help you will that. I recommend phoning the company as they would definitely know the answer!
@@SeanEvelegh Thanks for the reply
@@thecarcleaner8364 my guess is yes, but I don't 100% know
What is free phase power ?
where did you find 20 amp plug equipment, cant find it anywhere?
its 16amp plug and socket not 20amp
@@verminwizard3303 The largest one requires 32 amps.
Is it suitable for EV charger point?
No, definitely not.
No way you can pull 22kw on a single phase.
Have a look at ruclips.net/video/qBXKqmtwNOI/видео.html
Is these converter are in higher ranges as to convert 5 HP motors ???
I think you might be able to get a bigger converter for that yes!
@@SeanEvelegh is bigger converter available in market ? I wanted to run bosch 5 HP machine on single phase ...
@@chetantikone6837 maybe the clarke 60 converter, mine is the 40.... I'm not sure though.
Howmatch
Would this work for a more powerful motor? Say you have a 5 hp 3 phase motor. Could you set this controller to 3 HP and have it run the 5 HP motor? I realize that the motor couldn't put out 5 HP, but would it still run at 3 HP? I have a 5 HP 3 PH motor but I don't need that much horsepower. If this unit would run the motor at 3 HP that would be just fine.
Hey mate, I know exactly what you are saying. however I'm not an expert so sadly I cannot help. I recommend emails clarke and the tool company would definitely be able to help.
That machine spinning up didn't sound like proper three phase. Motor should start much faster than that.
Have a look at my 3.phase shredder here and hear how fast the startup is
ruclips.net/user/shortsHuJwUg_Tjrg
If you are really getting three phase from a single phase, it must be pulling one huge current on the phase. Not ideal.
I'd just get proper three phase in the first place.
American electrical system is so inferior and outdated. In most European countries all buildings (even small homes and apts) get all three-phases 230/400V i.e. 400V between phases, 230V between phase and ground.
I'm in South Africa and I have three phase 400v too. Can't understand the US and UK being so backward.
It's all about need here in the states. On a main road such that I live on, 3 phase is readily available. On a secondary or back road that my parents live on, single phase is all that's needed.
Makes no sense to run extra lines to places that won't use it.
@@AndrewDeLong seems strange for long runs to have a single phase.
Three would be more efficient. But I guess it's economics 🤔
@@the_real_hislordship I can only speak for my region of my state, but as far as our power supplier is concerned, it's cheaper to run one single phase line than it is to run three lines on back roads. The setup requires different construnction on the poles themselves.
I suspect it might not be so much of an issue if they just burried the lines like any sane person would expect. 🤣
Sweet. Too bad I’m in America lol.
OMG....Nooooo PLEASE Read any "old" electrical motor wiring hand book you can jst add a CAP and change windings on main input and just run on single phase 220V with capacitor......!!! Go On How Much Then?...plz?.
NOT TOO Mention that a 220VDc P/M Motor has 3Hp and runs on only 4AMPS @220VAc.....mmmmmm standard plug and 1/3rd the size and weight...pmsl...lol BUT...OK?.
;
69th comment
congrats!
What the hell is "free" phase power? And never heard of a "free" horse power motor.
lame
Alright 'The Bat Prince'