Это видео недоступно.
Сожалеем об этом.
5 Things I Do to Have a Better Home Network
HTML-код
- Опубликовано: 15 авг 2024
- ►SUBSCRIBE: www.youtube.co...
►FOLLOW me on Instagram: / behfor
►SUPPORT My Channel: / behfor
My current Wireless Router:
►ASUS RT-AC68U: amzn.to/2DKiEV7
Related Videos:
►Wi-Fi 6 | The Latest Generation of WiFi [802.11 ax]
• Wi-Fi 6 [802.11 ax] Ex...
►Dual-Band Wireless Router is Now Single-Band!
• Dual-Band Wireless Rou...
►Which one is the best firmware for my wireless router?
• Which one is the best ...
►How to Extend your WiFi range using an Old Router [DD-WRT]
• Extend your WiFi range...
Disclaimer:
1-Please do not make any changes to your network or Internet connection based on the information in this video. I do not accept any responsibility or liability for any loss or damage of whatever nature (direct, indirect, consequential, or other) which may arise as a result of your use of the information in this video. This video is for educational purposes only. 2-This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This will help my channel, so thank you for using my links!
#homenetwork #wifi #wirelessrouter #router #wireless #behfor #it #tech #technology
So far my whole apartment has Cat5e cables which are enough for 1 Gbit/s but after planed renovation I am going to deploy Cat7 as futureproof setup. Also what I do, that I every 1st day in month scan Wi-Fi noise and decide, if my channel choice (1 / 100+104 for router, and 11 / 112+108 for additional AP) is still least crowded by other networks. Then I look for software updates for RouterOS (primary) and DD-WRT (for access point), if there is update I carry out update, if not, then I do planned reboot.
Also what should be considered is channel width. Many routers have by default 40 MHz width even on 2.4 GHz, which works like double sided sword. Access point picks more noise from already crowded 2,4 GHz and also contributes more to 2,4 GHz congestion. Please do not use more than 20 MHz width on 2,4 GHz. I even reduced width on 802.11ac networks to 40 MHz because we are using Wi-Fi mostly for phones, tablets, where maximal practical speed ~ 240-260 Mbit/s is
My next suggestion is, what can be connected using ethernet, then connect it using ethernet. Even my Chormecast 3 is connected using Ethernet and notebook that I use for home office is connected to ethernet. Wi-Fi is used then mostly by phones, tablets and notebooks that are often carried around the apartment
One of my winter projects was to optimize my home network. After watching your video I immediately found a CAT5e that I had between my cable modem and my router. I replaced it and I'm now doing a site survey to optimize my channels. Excellent video and it gave me a great starting point to get the most out of my network. Love the drum ... I chuckled every time you "played" it. Have a great holiday Behfor!
Very good video. Well presented with good info. Liked & Subbed.
Much appreciated! :-)
Another bullet point to cabling advice: use pre-made patch cables whenever possible, but definitely don't use ethernet cables that are terminated like the ones shown at 3:23. Those sloppy terminations will make your connection flaky and slow, because twisted wire pairs are untwisted for too long (yes, untwisting 1 cm longer matters) and the RJ45 jack is not fixed to the outer cable sheathing.
I just love your videos! Funny and informative! keep going
I have the asus ac88u, and Would love if you do a complete Merlin config video of the ac88u/ax88u. Can't find any decent tutorial!
You sound italian lol, sound funny cose I lived many years surronded italian friends
Amazing information and knowledge and the easy and clear way how to explaining. Best regards,
Glad it was helpful!
Informative, entertaining, and great editing. Well done.
Thanks! Glad you liked it 😀👍
Excellent presentation with very good graphics!!
Thanks so much! I'm very glad you liked it 😀👍
Thanks for the informative video. Love ur content. In fact last week I suddenly had issues with my fibre connection and referring to your guide was able to connect my spare phone as secondary WAN and minimize downtime. Not too mention that way my AiMesh nodes doesn't get affected as well.
Still waiting for the Onemesh/Tplink Archer A7 follow up videos
I'm very glad you found the videos useful, You're gonna see the OneMesh video soon but it's not gonna be the very next one though ;-) Thanks!
U can get away with even 10Gbps on cat5e as long as its less than a
45meter run of cable and its UTP
I enjoy your videos . Thanks for all the info you share. How about an article about "Creating a Captive Portal." I need to do one for my brother. Thanks....
Thanks so much, glad you like the videos :-) Thanks also for the good suggestion, I'll keep that in mind :-)
Hey Behfor can you get a Pace 5268ac that AT&T uses and do a tutorial on it trying to setup bridge mode. Supposedly it can't be done and requires something called DMZ and the connected router has to be on a completely different network IP address.
Hi, unfortunately I don't have that router right now, but hopefully one day! Thanks :-)
Could you do a full tutorial of the features of Merlin? I have the AC86U and have merlin installed but there are settings i want to change but don't know what it does.
Really love your videos you make everything simple .Do make a video on Merlin vs Duma OS if you can.
Thanks so much for the suggestion, I'll keep that in mind and see if I can do that, thanks :-)
Haha useful video with an entertaining drum roll, what else do you need in isolation? :)
Hahaha I know :-) Thanks!
Big Fan Really like your videos informative and funny. Keep up the amazing work !!
Thanks so much 😀👍
hello, can you advise me, I have internet from a local provider and I have an external unit Ubiquiti LBE-5AC-Gen2, I have to set my router as ap or otherwise, if I set it to ap, wifi 2.4 and 5 ghz will be more stable for me, the function will also work in this mode from Asus AiProtec because I currently don't know what type of connection to choose, if I take it logically the external unit works as for access to its already existing network or not?
I love your channel. Greetings from Indonesia. One question do you separate ssid between 2.4 & 5.8 so you can force your gadget to stay in one of them? Or broadcast as single ssid?
Thanks so much! Both cases are possible and it'll depend on which one works better for you! I personally use separate SSIDs because I use each frequency for a different reason. But using the same SSID and password will make the network simpler and it's up your device to decide which frequency band it should connect to. Thanks.
Actually, you can achieve >100Mbps with CAT5, the limitation goes by the Fast Ethernet port
Thanks for your video. I set up an ASUS mesh network based a previous video of yours. Do the nodes create interference as well?
Good question! Yes they do, because all AiMesh nodes use the same channels for the 2.4 GHz and 5 GHz and unfortunately there will be some level of interference. I actually talked about it a little bit towards the end of this video ruclips.net/video/ic0bgo_ueQ0/видео.html Thanks :-)
Regarding your suggestion to use Cat-6 cable, I have a 40 mgb service with my provider. Am I correct in assuming that Cat-5 or Cat-5e will be sufficient with my service? Is there anything to be gained by going to Cat-6 ? Love your work and have been subscribed after watching the first video. 👍
You're right, if you have a 40 Mbps service then as far as the internet, it shouldn't matter. However, if you also use cat-5 in the local LAN, which is most likely a Gigabit LAN, then you're downgrading the LAN speed from 1 Gbps to 100 Mbps. That's also something to keep in mind, especially if you transfer big files between devices and such. CAT 5e should be alright though 👍 If I were to buy a new cable though I would definitely go for CAT 6 because it's very cheap and doesn't make sense to buy CAT 5e anymore , thanks 👍
I don’t reckon I’ve seen a box of 5 for sale in close to twenty years.
I'm in a similar boat as my internet service is limited to 25Mbs. The few wired Ethernet devices I have are older printers and 15 year old computers running Linux. Technically, I'm always about 5 years behind, except for my operating systems.
Thanks for your useful videos. I've recently bought Asus RT-AX55 Router, I wonder how many devices can connect to this router, do you know smth about this? I'm using the router in my home and most of the devices support older wifi standarts other than WIFI6. Thanks.
Hi. One question. A cable cat 5e would be enough?
Lol...
A great story from Indonesia:
3 years ago, a national ISP changed all the landline telecommunication from copper to FO, so it means that all the house connected to its product must use a GPON wireless router.
Guess what?
Suddenly there were lots of 2.4 GHz signal, literally on every channels available.
The worst part, those wireless don't even connected to Internet, lol.
It was just there because the technician or the company didn't have any training about wireless noise.
The easiest way is to install the 5 GHz wireless router, but damn that signal can't penetrate brick well..
Interesting story, thanks for sharing 👍
Indihome? Ahaha
Thanks 👍
You're welcome 👍
thanks
You're very welcome
🙏
BUDDY! Are you Persian?
BUDDY! I am!
This should be renamed to Wifi Home Network
It should if one of the points was not about Ethernet cables which is used in non-WiFi networks as well!
@@Behfor Yes, but I was expecting Patchpanel, Switch, etc. info and not simple wifi
🇮🇷 💓
1st😁
Thanks :-)