Pc fans running at full speed No display FIX PART 1
HTML-код
- Опубликовано: 20 окт 2024
- #shorts If your PC fans are running at full speed but you get no display then check this series out to fix your pc problem!
Join this channel to get access to perks:
/ @maccoyzkie
Visit my amazon storefront▼
www.amazon.com...
SOCIALS▼
/ maccoyzkie
/ mkb_cult
/ m4coyzkie
/ m4coyzkie
#pc #nodisplay #fix
Watch entire series here ruclips.net/p/PLqHl1qasBnOGF8ptAoaykIuOJezZD0Zj7
Ok
Your device isn't going to overheat the moment you turn it on.
it will if your aio pump is not work or heatsink is not properly placed
@@MacCoyzkieaio punp no you would still get an image as the water need to heat up in the loop and even use in a heat sink you would probably get a display of something normally the BIOS. Splash screen and then probably an overheating warning
@@jacksalem6472 it depends if the motherboard & aio has that feature, some old pc don't
@@MacCoyzkiefor me my keyboard and mouse are showing light and cpu is also working correctly so what to do ? Even tho my monitor is working with other pc nd laptop ?
@@MacCoyzkieuhhh, no? Your CPU can run without any cooling or heatsink for a short while before overheating, it will not immediately do this. More than likely if this is an issue someone is having it’s because they need to re-seat a component. Ram or GPU in my experience is the problem
Make sure if you replaced the ram that you inserted the ram correctly or make sure no dust balls have fell in the slot before adding ram. I had a similar problem and that was my fix.
Just happened to me, fixed it by shutting off XMP / resetting bios
time to clear cmos
how
@@qripled295 here you go bro ruclips.net/video/S9hyEPTFR10/видео.html
Exact same issue PC doesn't boot until my PC resets itself meaning it boots up then running on 8gb ram instead of 16 then when I go back into the bios and reset the bios my 16 gb ram is working but when I put on xpm boom no display, fans running on max and PC restarting itself until it resets its bios again
@@RN_SX Hmm, I turned XMP back on 3 weeks ago and it’s been working fine for me same sticks. You might want to ensure they’re properly slotted into the mother board, or maybe get a single 16gb stick and test that out. Christmas sales will pop up soon.
I just recently got my motherboard completely changed, got rams changed and got my pc cleaned because of a crash, no signal issue. Everything started working fine again but a few days later while in a game suddenly the screen went no signal and fans started spinning fast but still could hear the audio in The background. I had to close the pc and wait a few hours then pc would startup normally again but 5 minutes later it goes no signal and fans start spinning fast as again. Same thing happens. The pc works, the windows is open in the background but it just goes no signal with fans spinning at high speed. Everything seems fine. What is the problem here? Is it possibly the PSU?
your old motherboard might still be working, have the psu tested using a tester like this ruclips.net/user/shortsYrC3PlflLq0
Hey man, got yours fixed? Im currently having the same thing, it will happen when i am playing high end game. Its been months that i have this problem
i have the same issue, i got a new psu installed today as i assumed that was sthe problem, the pc runs a lot quieter and better now but it still black screens. i do NOT feel like getting a new Gpu.
@@christiandk09 most likely not the gpu, it’s happening to me i’ve tested it w 3 other gpus not sure what to do now..
It’s most likely something is overheating so try putting new thermal paste on stuff and if it doesn’t work take it down to the repair shop
I started having this problem, every time I would play heavy games or do a furmark gpu test my gpu immediately crashed with fans spinning 100%. I also got an error ”nvIddmkm” on windows event viewer. Deleted old drivers with ddu, but nothing worked. I had to always force shut down my pc every time it crashed. My gpu had been sagging so I suspect that could have been the issue. I got an rtx 4070 super and so far it has been working great with no issues and no more crashing, so at least for me my gpu was faulty or broke from the sagging if this helps anyone
you can try using one like this ruclips.net/user/shorts9BvLqs0SnaI
hi, for some reason i only get NO display once a week or so, kind of weird. and ive noticed when i manually press the on and off buttom on my monitor, i get Display and everything works fine. any tips or solutions to this? this never occurred on my old pc so i dont think is my monitor (just build this last month)
if you still hear the game music or whatever sound you got things running, then the display goes black its probably a monitor cable (hdmi/dp) or the monitor itself is the problem. try your pc with a friend or relative's monitor to check
thank you for the feedback, but this only occures once i turn on the pc, not while using it
@@MacCoyzkie
My pc goes dark and all fans start to go nuklear turbo. It happens on some games(it happens in old and new games) please help me man im goin insane
you need to update windows first then try to update the gpu driver. if it still the same try to ddu the current gpu driver, here's how ruclips.net/video/SvIJhcxZTsA/видео.html then install a freshly downloaded gpu driver after
@@MacCoyzkie ill try it when i have a few minutes and raport the outcome thank you for the response
@@MacCoyzkie done that, still the same. I think my card is wasted
@@StaryBrudnyLis187 perhaps the game requirements are too much for the system
@@MacCoyzkie nope, I don't think that Dungeons and Dragons Online is 2 much for my 2080 rtx ti hehe
In my new PC build, the boot drive suddenly wasn't detected. To fix this, I removed the CMOS battery to reset the system, which resolved the drive issue. However, now I'm experiencing a problem where the display goes black, the fans start spinning at full speed, and there's a slight crackling sound coming from the PSU.
that doesn't sound good, the crackling sound from the psu is concerning. what's your psu model name?
@@MacCoyzkie The PSU in my build is a DeepCool PX850G. This is my first PC that I assembled myself last week, and it has made a slight cracking sound since the beginning. I resolved the other issue of a black screen and fans running at full speed by replugging the PSU cables. Also one of the cables was touching a fan, so I adjusted it. However, the minor cracking sound persists.
@@sourabhshukla8625 I also have deepcool psu and im not sure what it is but mine also do those sounds. the reason i ask the model name is to confirm things, if its from an unknown brand that could be dangerous but deepcool psu are just fine so no need to worry about it. run some stress test on your pc to check the stability since all is working now
@@MacCoyzkie I'll go ahead and run some stress tests to check stability as you suggested. I appreciate your advice!
This is absolutely not true How the hell do you check the temperature if the computer is not working most likely that’s because of a CPU problem or funky ram ( the best way to fix it is to pull them out and then put them back in for the ram maybe in a different order)
I just replied something similar on another comment, but for anyone having this issue, ignore the guy that uploaded this short. You don’t need to reapply thermal paste or anything like that 🤦♂️
Your CPU can run without a cooler or heatsink on it for a short time before overheating. You can try it right now, take your cooler out and power your pc on. (Obviously don’t leave it running for very long because it will overheat quickly but it can and will boot like this)
Reseat your GPU and RAM. In almost all scenarios that’s gonna be the problem
@@bloodsausage6635 by reseat do you mean like just take them out and put them back in or did you meant to say reset? In that case how do you do reset them ?
Hi brother, I need your help..
The problem with my Laptop is that is turns off the very next moment I turn it on. I noticed that after letting the (restarting) process repeat 20-50 times, my PC does start. But again after shutting it down and turning it on, the same problem persists.
Pls suggest any tips for a repair (I tried all basic solutions but each of them failed)
i made a video for that specific problem, check it here ruclips.net/video/bzV4WBuZdLU/видео.html
For Me Im Just Playing Game And Suddenly Its Freeze Itself And Turning Off When I Turn Back On Its Blank Screen No Display
can you try this out ruclips.net/video/STEsMGJGw78/видео.html
So I bought a MPG MSI Z790 edge wifi motherboard a couple days ago and a i7-12700k CPU abt a month ago. Once I turn on my pc it only and always stays on the red light cpu debug led. Everything is plugged in correctly and tight and I’ve put the right amount of thermal paste. I’ve watched your videos on how to fix it which is clearing CMOS and removing RAM sticks 1 by 1 but none of those methods have worked. I’m supposing the CPU itself it broken? The CPU socket on the motherboard ISN’t broken bc it’s a new motherboard lol. I’m planning on buying another CPU too see if that fixes the problem, but if you can help me figure out another way to fix this problem without having to buy another cpu please lmk! If you can’t that’s totally fine.
is this the reason why you bought MPG MSI Z790 edge wifi motherboard? if the i7-12700k doesn't work in the old motherboard then yes this could be the cpu. usually you need to test it with a working compatible pc to check, which is you can only do that at a local shop. unless you know someone with the same specs like your pc and ask them to try your cpu in their rig.
@@MacCoyzkie I originally had the MPG MSI Z690 edge wifi when I bought the cpu and my pc was working just fine. The only reason I bought the Z790 is because I had 2 ram slots that were broken on the Z690. So I returned it and bought the Z790 and now, like I said doesn’t get past the cpu red light debug LED.
@@RlyMxtrix ok, how about you update the bios first. make sure the firmware version is compatible with your current cpu. if after the update it still does not work i think you should use Rma
My cpu ryzen 5 7600 rx570 gpu.. Temp go cpu 90 % and gpu 88 when playing game but my display trun off but cpu on Full speed fan.. What is the problem can u tell me?
that's overheating bro, try opening the pc case side panel for more airflow. if its still shutting down try to replace the thermal paste
my brand new PC just started doing this, and neither cpu nor gpu has gone over 55 degrees even under full load. I looked really good under my GPU, and the PCIE bridge cable is broken... The actual slot that my 4080 is slotted into is snapped in half, and some of the pins are halfway pulled out. Gonna go ahead and assume that may have something to do with it haha.
definitely bro, since its new use warranty
@MacCoyzkie oh absolutely. I am getting the cable replaced Tuesday since the gpu is perfectly fine. Oddly enough, I found if I run the gpu fans at 65% and keep max temp under 50 degrees, it won't kick off.
its not over heating
check part 2
i need help..
so my pc sometimes jus randomly blackscreens, the monitor turns black (completely turned off no windows running in the background) but the pc is still running..
do u know the cause of this? and how can i fix this
copy paste this link ruclips.net/video/dusz5P8GMGU/видео.html this video might help
My PC starts at fans full speed and no display on the screen at startup. My PC is room temperature. Hasn't been on in several years so it's obviously not overheating.. any tips?
dirty pc causes overheating too
Probably some failure preventing the system from initializing, rather than heat.
@@user2C47 yes, usually the gpu.
I have a fix that worked for me. If you have a gpu installed turn of your of your pc then remove the gpu and boot it back on and it should turn on
I need help bro, sometimes my pc just black screens and fans go to full speed, even when im just watching youtube, and i have monitored the temp and its well bellow overheat level. What do i do?
if your pc is dusty i think its time to clean it. we have a way to check the temps of the cpu and gpu but there is no way we can see the temps of the vrm and other pc parts that are dusty
@@MacCoyzkie iv alr dusted it, like 4 months ago or so i changed the chasi and i dusted everything with my older brother, theres something else wrong
@@DENTIC can clear cmos for now to have the system run in default settings ruclips.net/video/S9hyEPTFR10/видео.html
Why my pc after install gpu no display black screen
i made a tutorial for that issue, copy paste this link ruclips.net/video/pwgg8Vp2NNk/видео.html
I've got one issue. My pc struggles to launch and then when it does goes into bios and says launched jn safe mode when it is not enabled
try clearing cmos ruclips.net/video/S9hyEPTFR10/видео.html
it's all about the Ram
😊
Same Problem for me, how to fix it ?
@@mr.miyagi4255
It's maybe Software failure, reinstall windows
Reset bios settings
Consider Checking your caples too
When i have mmy 6600 xt plugged i get not dusplay even if its plugged into the motherboard but if i tske the gpu out the motherboard will display
watch this to get it fixed ruclips.net/video/pwgg8Vp2NNk/видео.html
@@MacCoyzkie I'll try it in the morning thanks
@@MacCoyzkie thank you so much God bless you 🙏it worked. Un installing worked
@@dankoakovic9623 Glad it worked bro!
This can also be the result of hardware failure, such as bad memory, preventing the system from initializing.
yes that can also be
Like me. I tried my gpu in another system and it doesnt work. But when i get mine to finally boot and do system restore it works fine for some time then it doesnt
@@guanedits6349 If you mean the suspect GPU works again in the first system, it might be a contact issue. I've had multiple GPUs become intermittent, where they would quit until reseated, and sometimes took a few tries.
@@user2C47 no that isnt my issue. I didnt not reseat my gpu and i worked randomly...it stayed on till i was able to do sustem restore. I can also mention i used to get a BSOD "Critical_process_died".
Every time i do system restore and apply windows updates my pc shuts down again
@@guanedits6349 The 'CRITICAL_PROCESS_DIED' stop code is related to important programs (like the kernel) crashing, usually not GPU-related. If it's able to display a blue screen, the video card is probably working.
My top 2 suspects would be memory issues, or failing to load files from the boot drive. Both seem to be relatively common.
For the memory, try reseating the RAM sticks. If no change, try putting them in one at a time, or in one slot at a time. If the issue only occurs with one particular stick or slot, you've found the issue.
To check if it's a filesystem issue, try checking the SMART data, paying particular attention to reallocated and uncorrectable sector counts. If either is nonzero or increasing, the drive is toast and you need to back up anything important *immediately.* To check for corruption, from an elevated command line, run 'sfc /scannow'. To check if it's a bad update, try using System Restore and _not_ updating.
can it also happening on psu ?
yes
I had the same issue. The solution for me was with the cable from the pcu to my 4090 card. One of the connectors were loose. Once it was snapped on, I stopped having the black screen of death.
nice gpu bro!
I've just gotten a BRAND NEW pc TODAY. and I've had this problem five times. I need help.
you build it or is it prebuild pc? what's the pc specs?
@@MacCoyzkiei got a prebuilt stg aubron i7 3060 16g ram i have the same problem took ojt ram stick put it back in different slot nothing works i used different cables too
@@fuijma6457 shutdown the pc and unplug it from any outlet, then do this next. you need to copy paste this link ruclips.net/video/S9hyEPTFR10/видео.html
will this ruin my pc? if i mess up taking the cmos out@@MacCoyzkie
@@fuijma6457 what it does is it will reset the bios to default, meaning it should work normally if all pc parts are compatible & not faulty
nah, the only way to fix it by having an air conditioner in your room turn on your while gaming, having a big casing for good air flow, use full modular psu cause non modular psu cable will interupt air flow and lastly use liquid cooling
thats how you fix this problem by becoming rich
I literally just took it out the box still not working
what happen before the pc problem started?
@@MacCoyzkienothing
It’s brand new I plugged everything up then the monitor it’s been saying no signal for 3 days I checked ram
@@BheAvin is this a prebuilt pc or you build it yourself? Again let's check the basics first ruclips.net/user/shorts-IMdGQKLwrg
bro i really need help my pc aint turning on but its cpu is hot
how did the pc problem started? is this a new build or was a working one?
@@MacCoyzkie hey i fixed the pc it was dust and also the gpu wasnt put correctly TY
We have same CPU 🎉🎉
😀👍
Bro 5° temp and 4 din bad on kr rha hu 😂
This is what happened to minw
i hope it works but if it doesn't check the entire series
I was up late gaming last night and my GPU temp was 35-40 so no overheating or anything I turned off my PC and this morning my fans spin but my GPU not displaying and not detected by device manager i tried an old one and it works which means the slot is fine, is my GPU dead ?
try to place back your gpu again and clear cmos after ruclips.net/video/S9hyEPTFR10/видео.html
if still does not work have your friend try your gpu in their pc, if still does not work in their pc it might be dead already
@@MacCoyzkie i gave it to my friend it worked after couple restarts and he gave it back yesterday and it worked fine on the first time and today also it boot at the first time magically it's fixed 😆 and thanks for the advices too i tried them when my gpu was at my friend's house
@@abdelmagh8418 no problem bro, glad its all good now