Computer Turns On But No Display - Led Light On Fan Spinning - HARDEST Troubleshoot?
HTML-код
- Опубликовано: 23 июн 2021
- When a computer turns on but no display on monitor appears, although the led light is on and fan spinning can be observed, this means the computer may have failed the POST(Power On Self Test). If this happens before a successful POST, one or more of the following will be at fault; Power Supply Unit, Motherboard, Processor, Ram, Graphics Card Unit.
CASE: IONX KZ16
PSU: Corsair TX750M
CPU: Ryzen 9 3900x
MOBO: Asus B450m-k
RAM: 16 GB (2 x 8GB RAM)
GPU: Palit GTX1080
DRIVE: Sabrent 512GB SSD
In this troubleshoot a pc video, HealMyTech teaches you how to eliminate each component one at a time and fix your NO POST issue.
However is this happens after a successful POST, i.e no display on monitor, then the issue could be one or more of the following: Video cable, video post, monitor. Watch this troubleshoot video for more details:
Computer Turning On But No Display - Pt 8 Troubleshoot A Monitor • Computer Turning On Bu...
Affiliate Product Links:
AMD Ryzen 7 3700X (8 Cores up to 4.4GHz, 32MB Cache)
UK: amzn.to/3vuexHW
US: amzn.to/3uwcAJs
Memory: 16GB Corsair Vengeance LPX 3200MHz (1x16GB)
UK: amzn.to/3yIfkqx
US: amzn.to/2RVsobv
Hard Drive: Seagate FireCuda 510 SSD 500GB M.2 NVMe & Seagate 1TB BarraCuda
UK: amzn.to/34nVPFS
US: amzn.to/3hWriXK
GPU: NVIDIA GeForce RTX 3060 Ti 8GB *
UK: amzn.to/3us8OAP
US: amzn.to/3ftKR7Y
Power Supply: Corsair 650W CV650
UK: amzn.to/3c0pUzk
US: amzn.to/2SEsSTl
Motherboard: ASUS PRIME B450M-A II
UK: amzn.to/3uugkeH
US: amzn.to/2Tqm6Bh
Cooling: Antec A400 RGB Cooler
UK: amzn.to/2SAYHfU
US: amzn.to/3yFxo4R
Case: Onyx
UK: amzn.to/34p2uiW
US: amzn.to/3i0hoo4
Canon EOS 1300D UK: amzn.to/2h8SZvw
Canon EOS 1300D US: amzn.to/2xplQW1
Boya BY M1 Lavalier Microphone UK: amzn.to/2xHslo4
Boya BY M1 Lavalier Microphone US: amzn.to/2y4Ydze
Zoom H1 Recorder UK: amzn.to/2w14L0W
Zoom H1 Recorder US: amzn.to/2xGyqkB
Mastech Digital Multimeter MS8268 UK: amzn.to/2y5xnXC
Mastech Digital Multimeter MS8268 US: amzn.to/2xa7ng8
HealMyTech Custom Amazon Affiliate Links:
UK Amazon Affiliate link: www.amazon.co.uk/?tag=healmyte...
US Amazon Affiliate link: www.amazon.com/?tag=healmytech-20
Subscribe to my channel: HealMyTech
/ healmytech1
Connect with me:
Email: contact@healmytech.com
Twitter: @healmytech
Instagram: HealMyTech
Facebook: / healmytech-17391424063...
Thanks for watching!
#nodisplayonmonitor #troubleshootacomputer #computernotturningon 
Наука
I am aircraft mechanic. We do the same thin g for troubleshooting, use known working parts to swap out till you find the issue. Saves millions of dollars a year. Thanks for the video.
My pc fans are running and my pc is on butmy keyboard and mouse aren't lighting up or working nor is the signal on my monitor
Did you got any solution I am also facing same issue
i’m facing the same issue any solutions?
@@calixerastro motherboard and processor?
@@Sathish_vizag i5 13600k and gigabyte B660m
@@calixerastro did check motherboard any damage ?
Figured mine that it was either the bios settings or the static. Fixed mine by removing the gpu, then the cmos battery to reset the settings for five-6 min, hold the power button for thirty sec to drain the static, and finally plugged everything back. GPU now displays.
IMPORTANT: (Make sure to have done the unplugging method above before proceeding) Also make sure to understand the BIOS configuration for the display. Sometimes, PCI-E (Display output for the GPU) gets interchanged with the iGPU (Display output for the integrated GPU of your CPU; most Intel CPUs have this) or the other way around. To check if that's the case, you can try plugging your monitor to the iGPU instead of the GPU or the other way around and check if it turns on. If it does, then there's a possibility that your BIOS is not properly configured to show display through your other display output. You can find it in most BIOS under 'Display Configuration' or the likes. Hope it helps!
This fixed mine thank you for sharing
it fixed mine to be thank you so much
Cannot believed that worked lmao. Thank you for bothering to comment this
@@naturalcauses1695 sure, glad to help!
@@blank4700 please bro can you explain i am having same problem how did you do that what do we have to do exactly first remove GPU and CMOS then hold power button for 30 second and then wait for 5-6 min and plug back that's it ? Or anything else pls reply
Good videos, have troubleshot multiple computers and your process is spot on what I do as well. Great work, great information.
If the motherboard's the issue, then try removing the cmos battery for 15 minutes or using the screwdriver to touch the cmos pins for 15 seconds to short circuit it. What that will do is reset the cmos (BIOS). That helped when my PC wouldn't post cuz of me being an absolute dumbass for messing with the XMP profile.
Short circuit bios pins? Are you trolling?
@@khushisingh-sj8wi he’s not trolling, with the pc off and unplugged there’s two little pints that if you connect using a screwdriver it’ll reset the cmos
Hey man i have the issue in the video right after i got a new motherboard and i went into the bios to enable xmp and after that my pc stopped posting do you think the cmon reset will work?
@@waternaso what do I do?
@@FunnyKaden555find two pins somewhere on your motherboard it’ll have writing next to it called CLR_CMOS turn your psu off and get a screwdriver and place it in the middle of the pins and wait for 15 seconds turn pc on and your cmos will be cleared
I actually switched my hdmi cable to the older cable and it worked. It was all about the bios system settings. It was not setup to detect pci-e or hdmi on the motherboard. Just the standard regular old vga cable fixed the problem for me
Same here. After a cpu upgrade, the PC turned on fine, but after some "cable management" in my ancient pc case (during which i did reset the BIOS), i couldn't get any display, even tho every part seemed to work as it should. Eventually (i'm not sure if i read it somewhere in a comment or if it was sheer desperation) i swapped the HDMI cable and plugged the GPU via the VGA one and BOOM, pc booted no problem.
@@sunseth1384 yeah i hate this problem, this evening i spent hours fiddling in front of a bit impatient people who's probably knew better than me, i knew there's something wrong with the motherboard or the bios but wtf can i do when resetting bios didn't work and nothing is broke? but out of all thing, changing display cable fixed the thing.
i probably didnt really clear the cmos or something, shit is weird, sometime restarting it about a dozen time will solve itself like nothing happened.
Oh man! Thank you thousand times!!!
I switched my dp cable to hdmi and it worked!
I suspected the board to be the culprit in facebook simply by knowing that the chipset was a b450 type, but I didn't actually think that it would be faulty though. One thing is for sure there would of been no other way to know for sure, without swapping it.
So, you've changed the motherboard or you managed somehow to fix it?
Hi guys one thing that you should check before doing any action is your motherboard cables connection, try to replug each cable at be sure that's well inserted, that was the issue that I faced pretty stupid 😫😫
Dam that actually worked 💀
I love yoy
yes, all cables, from ssds to other, its sily like that haha. Thats the fisrt test that everybody should do.
Hi, I have two motherboards that stopped working on the same day, It's a little weird. One gives one long beep and the other one long and 2 short. Is it possible that the power supply killed both? The power supply is otherwise not used.
Hi, i bought a new GPU BUT no booting and only 1 beep every few sec and i really think the Graphics card not detected by the BIOS (already updated) or motherboard (vostro260) !
any tips ?
Mine stopped showing images after stopping an overclock. I got the Alienware r10. The OC is the system preset so youd assume its safe. Literally tested overclock to see the difference. To go back to normal clock it did a restart aaaaaaand no signal. Resat the ram and gpu. Monitors work fine and the pc boots except it runs the rgb like for 5 seconds, goes black, repeats. Doesnt sound any beeps for system errors... Im confused af.
true . having parts is key for making PC diagnosis
Pc was working fine, once I put in the 3700x on a b450 board. No display unfortunately, I updated the bios before installing the new cpu
Today I replaced the pads on my MB and GPU heatsinks, but had forgotten to plug the CPU cable in after reassembly. I panicked after getting no image and thought I had short circuited my graphics card. So I found the cable while watching your video, and now my PC works again lol!
Thank you for spending 5 mins talking about the specs of that PC... So useful.. it's almost like I searched "how to hear random shit that has nothing to do with what I'm looking for"
Lmaoooo
I need help! I’m finished my first PC build and the test outside the case went well, the bios showed up on my motherboard and it was dandy! BUT now that it’s inside the case and everything is still running, I plug in my DP cable into the GPU and into the monitor but now the monitor says it’s receiving NO signal from the DP cable. I’ve got no idea what’s wrong
Yo i have the same issue right now , since you commented 1 month ago im guessing you solved the problem can you please tell me how
@@hamadkd7017 just finished my first build, after 5 hours still same problem as you
And how you fixed this guys
@@hamadkd7017 Hey! The issue fixed itself. Idk how, but after 18+ hours it started working. That’s not useful but I’d say leave the plugs in and come back to it. Hope everything works out
Thank You so much for the trouble shooting information. The same issue described here is the same issue. And this happened a day after a windows 11 update too.
It just happened to me yesterday on that damn unwanted windows 11 update
Thank you, I found your videos extremely helpful during my pc build.
This helped a lot
Dude i wanna thank you. That eraser move worked amazingly with my computer. Its showed no signal and i did as you said. And now my pc is up and running thx for your help
Thank you very much. I was experiencing this exact problem and the video helped me a lot.
helped you how? you bought another mobo?
What if the MB is so faulty it blows your test cpu or other test parts as it did in the original PC ? For instance when the power on the MB is shorted or something ?
I recently build a new PC and was getting the boot and display lights, the graphics card was connected via display port and Dvi and still no image. I was getting desperate só I finally plugged a hdmi cable and it finally worked, I don't know if it is a driver issue but I still can't acess the Bios screen if I have the monitor connected using Display port, I tried to update the Nvidia driver to display port 1.4 but get an error evertytime.
I just also check the processor then it works after since I already did the other solution, this really helps. Thank you
What was broken in the motherboard?
My pc was working fine till recently. It was working on 2 X 8gb ram. Now it only boots on 1x 8 GB ram with no issues on any of the 4 slots and boots silently. When I boot with 2 X 8 GB ram, there is a noisy fan sound and no display and after a few seconds, the pc goes into a boot up loop. I've test both rams individually in all slot and they work. I've even swapped out the CMOS battery. Please help can't figure it out
one of your ram is faulty. you need to run memtest individually to see which one is faulty
Test o ln tlother slots
What if my system posts even after trying hard to get this motherboard to post and then after some time it crashes in windows 50-50 chances to crash?
CPU- Core i3 6100
MB - GA-H110M-s2
SSD- Kingston A400
Ram - Kingston 4gb DDR4 2400, Hyperx 8gb DDR4 2400
GPU - Hd 7870
Psu - CM MWE550 Bronze
Motherboard was not powering on earlier, light and fans used to turn up for a sec and nothing after one spin. After some time it was spinning continuously like no power to cpu but never post. And after some ram adjustment and replacing rams it did post and now I'm facing crashes and sometimes the same no post but posts after turning on in sometime
I have the same problem, but in my case B550M and also not a single usb port is working.
Am I going to have to buy a new motherboard?
I need help , when my uncle transferred my ram to the new pc to test out if the new one ram is faulty. Then when he put it back on my pc , my pc doesn't display anymore even tho the system is powered on. The cpu ez debug light is blinking white light in few secs in startup then a hold white light after those seconds , we tried cleaning the ram and the ram slot , put in diff slot , and still doesn't work. So we tried resetting the bios , check the cpu if it has bend pin , the cpu is ok but still not working.. Sorry if my english grammar is bad.
I have this same issue right now, did u find a fix?
He changed the motherboard with a new one and it worked, for those who are wondering and are frustrated with their gpu not working, saved you 14 mins!
Thanks my dude, it seems to be motherboard with the one I am working on for the client. It is a good thing I can get another used one for less then $10. This is now two times you saved my ass, first being with a fried power supply testing
The issue with my motherboard is that mine has a button labelled as CLR_CMOS2 instead which seems unique from other mobos, i havent seem this with other motherboards. (MSI X470 Gaming Plus). What i did was just shut down the computer and unplug the power cord that connects to your computer and flip the switch, once thats done. I pressed down on CLR_CMOS2 for 15 seconds or so and let go and plugged back everything and it worked.
Update: I had the same issue again, i had it two more times and fixed it the same way i explain above. Its kind of annoying and im concerned about what's wrong. Can you suggest akhi pls what the issue might be?
Hey my man I hope you got your problem fixed. But for everyone reading your comment from now on let me say that if you're facing this issue frequently and you're solving it frequently by resetting cmos, you should replace the battery.
Thanks for the video. I'm currently experiencing this issue. I moved my pc from basement to 2nd floor and now it spins+lights up but no display on monitor. I tried another monitor, gpu, other RAM and different slots. I'm at the point where it's either the cpu cooler, the cpu itself, or the motherboard pcie slot. I'm really regretting not taking the AIO and GPU out before moving it.
Did you end up fixing this issue? Having the same issue after moving.
@@Morvellius yeah turned out to be the motherboard pcie slot. Luckily my gpu was fine and it was not too expensive a motherboard but still, unfortunate. I wish you the best lmk how it goes.
Hi there i have watch some of your videos on PC repairs, especially the one that says PC turn on LED light on, fan spinning but no display on monitor. Please i have the same problem on my computer and also there is a steady white light on the motherboard around the that says VGA debug something i can really remember. Is there any way you could help me. Please.
i have the same problem, with the difference that one out of every 20 times, or so, that i turn on the pc i can acces the bios. can you please tell me if you were able to fix it, and if you could, what did you do?? at this point i dont know what to do, please 🙇♂
Hi there, no the PC is still not fix, actually when you turn on the computer, everything seems to be working normally, the fans are spinning, led lights are on, but there is no display on screen, and also mouse and keyboard are not responding, then i notice there is steady white light on the motherboard where it's written CPU. Is there any way you could help
@@chebonaventure6382 i’m having the same problem literally did you ever find a solution?!!?
@@chebonaventure6382 hi bro, did u fix ur problem ? Because I'm having the same issue here, can u please help me?
hello, i have a brand new the x670 aorus MOBO, and it has no video, what do you recommend ?
Hi, hope you are doing well.
I got the same issue with my Dell Inspiron (i7 4790 processor). It was installed in an i3 casing previously. I bought the Gamdias Athena E1 Elite ATX Micro Tower Gaming Case (1 ARGB Fan) (1 Black Fan). And my PC was working fine but when I swapped it to new case, my PC stopped giving the display.
My PC bios got corrupted by swapping. So the technician did new bios but it still didn't gave display.
I took my PC to a new technician and he just plugged out the power button with the wires from the previous casing and shoved it in the new casing and my issue got solved. Now my PC has duel power bottons. Turns out that the jumpers and the system security from the previous casing were the only way to make my PC function again.
that´s weird
@@dexzero I know and later my motherboard died...
I have this problem but im not really sure if its the same. Heres the issue:
Problem: No display but with power just like yours.
Issue #1: Gpu(connected) = No display with power and fan is spinning but keyboard and mouse not turning on
Issue #2: Gpu(disconnected) = No display with power and fan is spinning but keyboard and mouse will turn on and I can see the light of capslock led and numlock led.
My question is what would be the cause of this problem? Is my mobo good because it shows that if my gpu is not connected my keyboard and mouse will turned on? Or my psu is bad and doesnt give enough wattage?
Also I dont have iGpu. Im using ryzen5 2600 so I cannot tell if my pc is booting up to bios when the kboard/mouse is turning on.
My gpu is good tho because the Tech tested it and I saw it myself.
I have the problem that the gpu fans starts to spin fast and the display turns of while I am playing games
I have a Lenovo laptop which switches on, when the screen lights up it has the Lenovo logo with preparing automatic repair. Then another screen appears headed choose an option. The only one that takes me forward leads to another screen: Automatic repair. However, this like the rest leads back to the first screen: preparing automatic repair!
What can I do?
I am very suspicious it's my motherboard causing the issue. It had been repaired once for the same issue. But now, I decided to buy a new motherboard. I'm done dealing with shit. Good video by the way.
I installed a new gpu and the pc wont boot up I unplug the power from that gpu and it turns on any idea would a low wattage power supply cause this? Or could the gpu be dead?
i have an orange light when i turn my pc on, but i can use the pc properly and display shows, am i going to have any problems later if i continue using my pc with an orange light on in motherboard ?
I recently bought asrock b450m hdv 4.0 Mobo, kingston fury 8gb ddr4 ram,I m pairing it with ryzen 5600g, but the system is not POSTING and i can't see any display or the boot menu. I tried updating bios through instant flash, but failed. Kindly help
Hey guys if anyone sees this! Just put the usb stick in it with windows and it probably will work. It worked for me!
I tried to overclock my RAM. My Omen 30L powered off. Then it powered on and I heard 3 beeps. It powered off then on again followed by 3 beeps.
The system is in but I don't see anything on my screen. How do I fix please?
I just have this problem ..i just get a3070before just use intel.uhd770 (13700k) .
After installing to the mobo it turns on normaly.. but after i install the driver ..and start gaming it suddenly off and no boot no screen at all.
So i switch back to my uhd 770 intel at the moment is works just fine.
Is this because of my PSU not meet the req ?
I have Antec 700watt 80+ Bronze.
I need help thank you verymuch.
Thanks.
Greetings,my problem is that my pc boots but I get vga light and 3 beeps,any idea?
Msi mpg b550 motherboard
Thermaltake 630watt psu
2 rams hyper x 16gb
Gtx 3070 gpu (I Also checked with another)
M2 Samsung ssd
I tried to add more speackers via SPKR connecter but after 3 tries the sound faded I think I broke the ac any tips??
If it still not showing anything try pressing (windows icon+ctrl+shift+b) while the pc is still running
Then turn it off by pressing the button
Turn it on
It's gonna ask you for boot by pressing f1 (don't boot anything) press shift+alt+delete
It helped me when nothing else did (I seriously tried everything) gl
Mine was different. didn't boot and had video card not detected beeps (1 long, 3 short), so I just brought all my stuff on the floor, which was cables, a monitor, and the PC altogether, and it boots. I also unplugged all the power cables and pressed the power button to discharge the PC before that. If you don't have a budget for anything else, it could be a heart attack.🤕🤕😄😄
If my computer going to post after turning off my psu, and when I restart it didn’t go to post- failure is my psu? So when I switch psu my computer have going to post after 4 save+reset in bios, on fifth restart it didn’t go to post.
Hi friends, I've been desperately experiencing the same issue, but my PC turns on, screen turns on too, but after a while it loses signal. Could you suggest where to look for the issue?
Possibly overheating of your GPU... try using the onboard graphics.
First things first to ever try when you get this problem is to unplug the powercable, then remove the battery on the motherboard becuase many MANY modern motherboards get fucked up then move around the PC and somehow the motherboard loses its "memory" or something.. 19 of 20 times its its so simple atleast.. cheers!
my pc turns on but the led lights don’t work and the screen is straight black but the ram i’m trying to install is brand new i’ve tried everything from all types of videos and comments and nothing is working
you ever fix it mine just like this
@@xaysfiles same man If anyone knows anything please help
@@junetheartist_ had too replace my cpu
@@xaysfiles I’m taking it in for repair tomorow - they said it’s a power supply issue so hopefully that solves it all - is yours all good now yeah?
when my pc is on some times it randomly black screens and restarts is there a way to figure out what part this is
Probably the PSU
i have a board msi X470 Gaming plus max, i recently bought a GTX 1070 amor Oc when i switch the pc on after 10-15 seconds the screen shows there's power because the no signal disappear but it stays black when i put back my 1060 it's working just fine
Msi x470
Ryzen 5 1600
2x 8Gb ddr4 klevv
700w antec psu
the 1070 is working on my friends pc with 650w psu also antec
at this point i tried so many tricks I found on RUclips but I never got to get the 1070 to display
My PC has a red and orange light when I turn it on and not display. The lights go away after like 5-10 minutes and the display turns on. Everything works fine once there is a display but obviously it's not supposed to be like that.
Hellow i have that same issue but i replace my gpu and its open but wont turn off
Oh dam was literally about to give up and just put my components in another pc. But it just booted up. So technically this video worked 👍.
but why would the motherboard go from working to not working because of the swap? I assume the dude was careful and didn't break anything.
Am I out of luck if I don’t have spare working pc parts
pc on , fans spin no keyboard light or mouse cpu light on motherboard trouble shooted the motherboard and ram could it be not enough thermal paste?
I had this happen to mine when first built. It was running off the i-gpu which had no drivers.
That's not exactly the same issue then...!
@@HealMyTech1 actually its the exact same problem. no display showing and all lights powered on. My worst fear was I fried the mobo but no, that's not what happened.
How did you fix it???
How did you fix your I-GPU problem?
that board shouldve never been paired with that cpu without active cooling on the VRMs or after market heatsinks applied those VRMs cant handle the core count and power load without overheating. He'll just have the same problem as before. Buy a bunch of old or defective boards for their heatsinks theyre usually the exact same hole spacing
Change new ram, still not working.
Change power supply, still not working,
Reset CMOS, still not working.
New Motherboard, still not working..
How about CPU ?
If CPU problem, you still can boot ?
it won’t boot in most cases
Graphic card
Ty
I just had the same problem on an older machine. Cleared the CMOS using the jumper and the graphic output came back.
Can someone plz help!!! Have a Msi tomahawk B450 gaming motherboard and is giving me 3 beeps, I replace the, motherboard, to a Msi B450 tomahawk Max 11, Rams, MSI a750 power supply, and processor which word for a bit and went back to shutting down & those 3 long beeps, took out the gfx card and it still beeps can someone help me????? PLEASE
Few days ago I decided to clean my PC, so I used a blower (I turned off the power and I also didn't touch any equipment, I didn't unplug any wire from GPU, CPU, mainboard etc...) after I finished with the cleaning I came to turn my PC on but it went off right after I turned it on... so I decided to test few things, like I detached the RAMs and changed their places and I also switched the power outlet (instead of using multi outlet I connected PC straight to the outlet) so the thing happened was that PC stayed on for a longer time (few more seconds) but it still went off and turned on again by itself... it's more like a restart loop... rn I connected the monitor but I don't have a screen at all not even mainboard logo and literally black screen...
Just had this problem after clicking update and shut down with windows 11. Turns on no display please help.
Use timestamps please. Other than that, great video and thank you. Your reaction to the successful post test, that's how I am too lol. I loved that.
No cursor on my screen , it’s pitch black, it says auto adjustment in progress and it doesn’t show nothing else
The easiest way I did was to check the beep sound when I unplugged all the RAM. Without RAM there would be long beep:
1. If the beep does not exist (you must make sure the speaker buzzer system of motherboard is fine, some motherboard failed to beep at all or your buzzer is broken/reversed) then it must be either the processor or the logic/Super IO motherboard (which is hardest) and after changing the processor to known working & compatible one still does not sound beep then it is clearly the motherboard issue which require advanced electronic test such as MOSFET and voltage output.
2. But if there is a long beep then most likely just VGA (Graphics Card) or RAM issue. Some motherboards (not all) will generate unique sound if the VGA is failed. Try using onboard or switch to another VGA. If the problem persist try replugging RAM to different slot or change the RAM to known good one (borrow one if you don't have).
If you are a technician usually you have something like "PCI Tester PC Analyzer Diagnostic Card" to show the current code that the motherboard is currently stuck at.
PS: I'm a PC technician for 8 years.
Hey brother, I got a specific question. When I turn on my PC the moniter and my mouse flashes on and off and the PC stays on but the moniter and everything else won't turn on. Do you know the fix?
great video
Can a bad motherboard work one gpu but not another
My pc have no signal with my graphic card i just tried the hdmi and my motherboad is beeping when the graphic card is installed on the motherboad. When the graphic card is not there the pc work just fine and i have display
Yesterday my pc ok, i tried to format but wrongly changed boot disk from bios when u can actually just clik esc or f8 to change boot to pendrive, after that bios i restart pc and it wont connect anymore even i pull off the pendrive, cleaned my ram, removed cmos, remove gpu, removed 1 ssd, still nothing.
i7 13
3060
32gb ram
All light on
Gpu fan spinning
i have a problem with my acer laptop it stuck at the acer logo screen please help
Bro im facing the same problem after im swap a gpu.. so im have change old gpu and put new mobo and psu but still the same
I have this exact same issue with my new build but don't have spare parts to test, ryzen 7 3800x with bf450 board, swapped ram, took mb battery out and put back in, motherboard and gpu light up and all fans spinning, just won't post, do you think it's the new motherboard? It seems exactly the same as this
Oh I also plugged a speaker into motherboard and I get no beeps at all when turning on, also the build won't shut down when I long press the power button, I have to switch off by psu power button
did u find the solution today ?
@@djsyks1 fixed ? Help
@@CRX_ARMAAN ended up sending mb back and buying a different one, worked straight away with new board, maybe the board I sent back needed the bios updating, I'm not sure but was defo the motherboard, maybe try updating the bios as that's the only thing I didn't try
@@djsyks1 🤣 i tried but didn't work ☹️ I use boot drive you can update bios with it without display
I have a Acer Aspire f5 572g 57pv laptop and after trying to overclock my laptop and hitting f10 in bios to save and exit, my laptop got stuck in a black screen every single time I try to boot it, no logo, no bios no nothing, just a black screen, I have tried to cmos reset by removing the bios battery, I tried it 3 times, longest time I waitted before putting it back in was 1 and half an hour, I don't know if this is because I have a bios password (yes ik the password I just need to enter bios to reset it but there is no display), I tried looking for cmos jumper but couldn't find it, please help 😦
my problem is that i changed some settings in the bios and when i left bios it was just black screen. I turned the pc off and back on and it did the loud thing that it always does when it boots on but it did it infinitely PLEASE HELP!!!!
fixed it! :) i just reset the bios
@@ho_rth I did that to but my bios won't reset
@@carsonschnell1181 what do you mean? did you take the battery out of the bios and wait for like a minute or few?
@@ho_rth ya
@@carsonschnell1181 oh.. sorry idk how to help you maybe something else is wrong? i am not good at this either
okay, so what if my pc has all fans running no rgb on them are turning on, my cpu aio has the fans spinning but the cyberpower logo isnt showing anymore and my gpu is working as normal but nothing will boot onto the screen and jo lights on mobo are displaying, very very confusing trouble shoot
only thing i can think of is the motherboard because i have no further way to test the ram etc but everything was running yesterday and today the system has given me these issues wont boot at all but power is being transfered through the system
Did you try to clear cmos before you just told the guy he needed a new motherboard
What’s that switch in your hand
My keyboard, monitor and mouse dont turns on, but the pc do, when i took off the gpu the keyboard and the mouse turns on but my cpu cant show display, so i dont know if the problem is the power supply or the GPU, another thing is that the GPU have a white led so i guess there is the problem
Mine is the same, but it restarts and goes back on again (It does this all the time) Its annoying cuz i lose a lot of work. Any Fix???
I have this exact problem, but my computer will turn on after around boot 5 attempts. Every time I try to use my pc, the fans run but there is no display, but it turns on after multiple tries, but it deletes my bios settings almost every time, and I have to restart again if I try to open some select apps such as games or fl studio.
It’s ur interface
@@prodgroovyCHU elaborate?
My TV says no display after Windows loads, Gigabyte splash screen appears, Windows loading animation spins, then as soon as it is done loading I get No Signal.
Any help would be much appreciated.
Thanks in advance.
can someone help
i recently got a new 4060 ti gpu
and i tried every troubleshoot known in this world except for bios update
im afraid to update bios because i heard it will ruin ur motherboard
i have a problem while im on my computer gaming and chilling and all of the sudden it just goes on no signal i still hear the sounds of the game and i can still talk and everything just the screen is on no signal i tried another cable first i had displayport now i have hdmi my pc is up to date with all the drivers and stuff so what can i do next its a new pc to specs is amd ryzen 5 and rtx 3060 twinx
Is the problem fixed?
@@abhilashdethroy5389 nope….
Do a video if the GPU fans are spinning really fast but there is no display signal, thats my current issue right now, I really hope you could fix it.
Have u put the pcie cable on your gpu?
@@pitkassim7006 I have...could that be the problem?
@@heyitsleyy if its not working, u need to troubleshoot it
1. U can try insert your gpu in other pc and try turn it on, if the display show up as usual, that gpu should be no problem
2. If u dont have other pc, try integrated graphic on your mobo, if the integrated graphic shows display, your gpu or gpu slow might have some problem
3. If u already try your integrated graphic and still no display, try change your display such as your tv, if your tv show up display, then your monitor might be problem, u need to try both integrated and gpu, to more comfirm, u try using ur pc on other monitor.
Point no 2, gpu slot, not gpu slow
@@pitkassim7006 same issue my pc turns on when i put hdmi in motherboard bt doesn't detect GPU bt gpu fan is spinning wht shud i do
So I have this same problem with my pc but I was just doing my normal pc business then I got a screen freeze i was loading into a game of g mod which can be a very demanding game and I’m only using a 3200g r3 apu after about 2 mins of waiting for the freeze to stop I decided to turn off my pc and after I waited 45 seconds I attempted to boot my pc up again but it did not turn on after about 7 minutes it turned on by itself and showed no signal with a red light on the motherboard I read the manual and it meant something was up with my cpu I bought it new from Newegg about 5 months ago and had no problems. Did I just put to much stress on my cpu and gpu? And is there a way I can fix it?
I'm pretty sure I'm having this exact same issue but with my 5600x, my 3080ti is still confirmed working so it's between the cpu and motherboard
put in new power switch but not reading hdd what is wrong??
My pc CPU led on but VGA,dram,or boot led not working and monitor keyboard mouse always off
We check CMOS battery, professor ,ram clear,all pluck ok...
What's doing now ?
I was just playing roblox and then suddenly out of nowhere the screen started flickering and it just froze nothing was working not even to restart button on my cpu case so o just restarted and then when i logged in the screen started flickering again i swithed off the power supply and turned it back on and since then my pc shows no hdmi signal from you device SOMEONE HELPPP MEEEE 🥺
One of the most common problems is a dead/or dying CMOS battery. When I have any POST problems, I insert a new battery. If the battery has gone SOUTH, you might see a message informing you that the system clock needs to be reset. Also, I keep a few new button batteries attached to the inside of my PC, just in case.
I had a CPU issue a few days ago. Same thing as in the video. RGB and fans turned on but no display. Thing is my GPU RGB wouldn't turn on which made me doubt if it was the CPU or the motherboard. A blue electric spark appeared in my pc before it happened, so anything was possible. So I just went to a pc store and got a compatible motherboard and CPU and I explained my issue and that I needed to do some testing. They told me I could return the hardware if it was in perfect state. I was still under warranty for my own components, but I didn't want to wait. That's how I did it if you don't have component, albeit a expensive solution. But you do get your money back in the end. Found out it was the CPU and returned the motherboard. Now I sent my old CPU for repair, but I still kept the new CPU. (Secretly did a slight cpu upgrade too, because it was actually a bottleneck anyway) So I got my money back for the motherboard and now I'm waiting for a replacement for my old CPU and will sell it after.
Cpu 99% of time cannot be repaired unless an smd capacitor was shorted or pins was broken
Hi i needed an help when ever i start a game on my pc start's makeing weird noises i think it's coming from the hdmi port can you please help
Not enough info, You need to start troubleshooting. Have you checked out my troubleshoot series?
@@HealMyTech1 it makes noise from the hdmi port side where the grafic card is located and now my monitor says moniter going to sleep while the system is turned on it happens.in editng software and games but when i start my system it makes rhe noise
I just installed amd driver software and installed driver after restarting there's no display I have amd rx570