Это видео недоступно.
Сожалеем об этом.
How to make corona virus protector at home / DIY / Arduino projects
HTML-код
- Опубликовано: 20 мар 2020
- #Arduino #coronavirus #covid19
The coronavirus is currently one of the most common diseases worldwide.Even the World Health Organization has warned that it is very important to keep the distance between humans to at least 1 meter.
In this video I explained how to make corona virus protector at home.If you want to make it at home just do step by step and fallow my video and never give up.
this channel to share exciting videos of Arduino projects,Electronics and electrical easy diy projects to share with you I hope this projects will be helpful for you to create something new .
subscribe my channel for exciting videos in future so that you never miss my exiting upcoming video
SUBSCRIBE LINK:-
/ @slideas1
Programming code:- Arduino :-
www.mediafire....
Music Credit: NCS ►
Ship Wrek & Zookeepers - Ark [NCS Release]
NCS: Music Without Limitations
NCS Spotify: spoti.fi/NCS
Free Download / Stream: ncs.io/ark
Syn Cole - Feel Good [NCS Release]
NCS: Music Without Limitations
NCS Spotify: spoti.fi/NCS
Free Download / Stream: ncs.io/feelgood
coronavirus
coronavirus protector
coronavirus china
coronavirus symptoms
coronavirus like
coronavirus in humans
coronavirus 2020
coronavirus test
coronavirus made of
coronavirus death rate
coronavirus caused by
coronavirus in dogs
coronavirus incubation period
coronavirus hku1,
coronavirus usa,
coronavirus mortality rate
coronavirus outbreak
coronavirus 19,
coronavirus cure,
coronavirus cdc
coronavirus deadly,
coronavirus map
coronavirus usa,
coronavirus nyc
coronavirus florida
coronavirus italy
coronavirus michigan
coronavirus illinois
coronavirus new york
coronavirus by state
coronavirus stimulus check
coronavirus vaccine
coronavirus ohio
coronavirus nj
coronavirus cases by state
coronavirus china
coronavirus cure
Patta bn
Thanks bro
I need that unuseable box
Will this work with solar power instead of battery?
Yes
Super bro
Thanks bro
Pls send me the link for buying this product
Please tell me how you bye this material like ARDUINO NANO , ultrasonic sensor
ebay and aliexpress online order.....
Thank you
It is really or not
Jo chij order Hua Hai vah Kitna Din Laga Hai aane mein
Please be first
sir please make video for code and give full Information please sir this is my project of inspire so please make video on this code how to copy
#define trig 12
#define echo 11
void setup() {
pinMode(trig,OUTPUT);
pinMode(echo,INPUT);
pinMode(5, OUTPUT);
pinMode(13, OUTPUT);
Serial.begin(9600);
}
void loop() {
digitalWrite (trig,LOW);
delayMicroseconds(2);
digitalWrite (trig,HIGH);
delayMicroseconds(10);
digitalWrite (trig,LOW);
long t =pulseIn(echo,HIGH);
long cm = t/29/2;
Serial.println(cm);
delay (200);
digitalWrite (13, HIGH);
delay (500);
digitalWrite (13, LOW);
delay (500);
if(cm = 0 ){
digitalWrite (5, HIGH);
delay (500);
digitalWrite (5, LOW);
delay (50);
}
else {
digitalWrite (5, LOW);
// delay (50);
}
}
Thankyou
Nice idea bro keep it up
thank u soo much bro...
Good Job Man Very Nice but do you know where I can get the Ultrasonic Sensor Box
Amazon
Or 3d printer
Observerlein ppl I can’t find it on Amazon can u send me a link pls
I can send you a link to the 3d printer :D
www.amazon.de/TRONXY-aufger%C3%BCsteter-Installation-Filamentsensor-Vollfarb-Touchscreen/dp/B07RKNLVWX/ref=mp_s_a_1_9?dchild=1&keywords=3d+drucker&qid=1589657893&sprefix=3d+d&sr=8-9
Please make a video on non contact thermometer.
Good work❤️👍👍
thank u
Plz make video on termal thermometer.
I want to make it plz reply about this 🙂🙂
Can I use 9volte battery?
@@renusrivastava4452 yes of course
@@renusrivastava4452
Thanks for the request I will try
sir without app
Super
Thanks
so it beeps if you get less than 6 feet from a person, or wall, or floor, or chair, or sink, or door, or desk, or dog, or ceiling, etc, etc, etc, etc? #FailOfTheYearAward
Please give me a science project for related to covid 19
Are u using telephone junction box for. Ultrasonic sensor??
yes
good idea, but how to charge the battery again?
Thanks for commenting
Additional supply Re-charge the battery or use the arduino usb port
how to enter code from phone beause i dont have Laptop sir please give me reply
Copy and past
Bahi apna number de sakathe ho
Bhai mane aap ko sab.. Kiya h may aur karava sakata ho pahale apna no. To de do aap se kam h
Instead of soldering directly to the board why don't u just use female to female (jumper wires)
Just to save space as the box takes up less space.thanks
Sir iski requirements available krvao
Where do you by the this thing like sensor please please give me the link please please
Sorry for the delay in replying, you can order these sensors online (ebay or AliExpress)
I have requirements u want to buy
@@sairamreddysrinivas3520 not now when I want then I will tell you
@@slideas1 bro do you want to buy
Please put this video into tamil translation sir
Bro can I use hw battery instead of phone battery
Any phone battery can be used bro...
Requirements where available
I have u want to buy
So when I tried opening the code it said it had a virus in it so what’s the code lol
//SL IDEAS
//ruclips.net/channel/UCsa_AZGA//nWCcgYGkkGd_r4w/?sub_confirmation=1
#define trig 12
#define echo 11
void setup() {
pinMode(trig,OUTPUT);
pinMode(echo,INPUT);
pinMode(5, OUTPUT);
pinMode(13, OUTPUT);
Serial.begin(9600);
}
void loop() {
digitalWrite (trig,LOW);
delayMicroseconds(2);
digitalWrite (trig,HIGH);
delayMicroseconds(10);
digitalWrite (trig,LOW);
long t =pulseIn(echo,HIGH);
long cm = t/29/2;
Serial.println(cm);
delay (200);
digitalWrite (13, HIGH);
delay (500);
digitalWrite (13, LOW);
delay (500);
if(cm = 0 ){
digitalWrite (5, HIGH);
delay (500);
digitalWrite (5, LOW);
delay (50);
}
else {
digitalWrite (5, LOW);
// delay (50);
}
}
Bro can I use nodemcu instead of Arduino
Yes of course.....
@@slideas1 bro nodemcu coding tell bro
Please please please🙏 give me the link please
Can you briefly tell about this project
Bro I tried but not working
Re try bro it is really work.....
Please be first
hadd hogayee
That is the most stupidest idea I've seen in a while
Dang Chill Dawg
can you plz give codes in text here in comment because the codes in mediafire are not opening plz do this i will reccomend your name to my friends else notplz
//SL IDEAS
//ruclips.net/channel/UCsa_AZGAnWCcgYGkkGd_r4w
#define trig 12
#define echo 11
void setup() {
pinMode(trig,OUTPUT);
pinMode(echo,INPUT);
pinMode(5, OUTPUT);
pinMode(13, OUTPUT);
Serial.begin(9600);
}
void loop() {
digitalWrite (trig,LOW);
delayMicroseconds(2);
digitalWrite (trig,HIGH);
delayMicroseconds(10);
digitalWrite (trig,LOW);
long t =pulseIn(echo,HIGH);
long cm = t/29/2;
Serial.println(cm);
delay (200);
digitalWrite (13, HIGH);
delay (500);
digitalWrite (13, LOW);
delay (500);
if(cm = 0 ){
digitalWrite (5, HIGH);
delay (500);
digitalWrite (5, LOW);
delay (50);
}
else {
digitalWrite (5, LOW);
// delay (50);
}
}
@@slideas1 really thank you the project is working now but there was a problem in your codes I have to customize them then only they were working
My only pleasure is that you get this knowledge............
thank u for reply & good luck to u
@@harditsingh8881 the costamize code give me please
@@miniatureworld6509 ruclips.net/video/1Wm9KHlBGz8/видео.html