Yeh, it wasn't an easy product to cast lol 😆 especially because I don't think I cast it right, but it worked, and it did the job. It wasn't bad at all, hehe. Thank you, babe ❤️
That was very well done Donna, and the results from your mold are gorgeous. I’ve had not great success making Molds, I’m going to keep trying. I just need something to make a mold from lol x❤️ Thank you x
I just get little things crystals etc from temu for a couple of £ and cast it. Most things are cheap as chips and you don't waste too much of it doesn't work out. I always think casting depends on the silicone you use as the teeperts seems to be the easiest one I've used to far. And then BabeDino Brand isn't pretty good to. It just depends on what you are trying to cast. I'm sure you will get there with practice. Thank you so much, Lesley❤
Looks great, i've wasted so much silicone trying to make moulds then I recently bought one of these housings from Temu and it's made so much difference, It's plastic and quite tough, also has plastic connectors that slide over the joins to keep them together instead of clips. It was only about £4 so i've just ordered another one incase I need a bigger mould.
Oh, never wasted loads of silicone due to ones that didn't work. Haha, annoying isn't it, but the housing definitely does make a difference. I'll have to have a look because the one on the video is flimsy. Thanks for that. Also, thanks for watching and commenting, Evelyn ❤️
Donna, I'm confused....what do you mean by blocking off the pearl so the resins don't cure together? What did you block it with or what/how did you do it? Also, great job! I had already bought a slew of these crystal figurines of animals and flowers, including this same clam to make my own molds too lol. I guess great minds think alike!! 😁💖
I put a thin piece of silicone inside the pearl hole just to cover the entrance because i didn't want the resin in the pearl to cure to the clam shell. So the silicone acted as a barrier. So the little pearl was not connected to the clam upon demold. I did this because I wouldn't have been able to demold it due to the way I cast the clam. Does that make sense??? I just used a very thin piece of silicone that I cut from the moulding that you saw me doing when I took it out of the housing. I inserted the silicone with some tweezers. I've bought a few things like the clam shell to cast, but i just haven't done any for a while, but I need to try the rest, Gaga. Yes, great minds think a like.
@@dandaresin Yes Donna that cleared it up. I missed the little piece of resin. My daughter was doing tiktok dances in my room while I was trying to watch the video lol.
@LorE_aka-midwestmemaw8555 lmao lol thank you. I actually would of forgotten.. I need one more reminder tomorrow and can buy tomorrow night lol 😆 I appreciate the daily reminder. I'm surprised anyone even remembered to remind me 😂😂
@@dandaresin I wish I could remember my own shit! LOL. But I got your back!! I'll remind you on tomorrows video, if I remember 🤣🤣🤣. I so enjoy your videos and humor!! Thank you for being you!!! 🫶
BTW, I can't wait to make a mold, I have everything but I can't find what I want to make a mold of, I'm always talking myself out of different items 🤣🤣🤣
Beautiful with the opal flakes!
Thank you so much ❤️
Brilliant clam Shell mold making tutorial 😍😍💜💜
Thank you, as always, Ms Sudha ❤️
Super cute!!! I really love the effects of the flakes!
Thanks Michelle. It's not perfect by any means but it's practice ain't it 🤣 them flakes I could bathe in them lol 😆
@@dandaresin I agree with you about the flakes! If there were a lotion with them in it, I'd wear it 24/7! 🤣
@@michellegarza9541 haha lmao lol 😆
How gorgeous is that! Love it so much
Thank you so much Kym ❤️
That turned out really pretty!!!!
Thank you Denise ❤️
Hi beautiful results 😍 the opal flakes look amazing thanks for sharing ❤❤❤ xxx
My pleasure, Michelle. I appreciate your support ❤️ xx
Love your clam ❤ its beautiful and i think the effect looks perfect 👌
Thank you so much Ms Tammy my friend ❤️
That turned out really good, well done 😊
Thank you so much 😃
Turned out great! ❤
Thank you, babe ❤️
They look pretty identical from where I’m standing. I need to try that silicone. Thanks for sharing ❤❤
Oh, it's a fab silicone for sure. Best I've used yet, lol. thank you so much, Mary, as always ❤️
Ouuuu very pretty shell with pearl😍😍 Not bad at all for the first try Darling!
Yeh, it wasn't an easy product to cast lol 😆 especially because I don't think I cast it right, but it worked, and it did the job. It wasn't bad at all, hehe. Thank you, babe ❤️
Turned out really pretty! ❤❤
Thank Karen ❤️
That was very well done Donna, and the results from your mold are gorgeous. I’ve had not great success making Molds, I’m going to keep trying. I just need something to make a mold from lol x❤️ Thank you x
I just get little things crystals etc from temu for a couple of £ and cast it. Most things are cheap as chips and you don't waste too much of it doesn't work out. I always think casting depends on the silicone you use as the teeperts seems to be the easiest one I've used to far. And then BabeDino Brand isn't pretty good to. It just depends on what you are trying to cast. I'm sure you will get there with practice. Thank you so much, Lesley❤
Nice
Thanks
Looks great, i've wasted so much silicone trying to make moulds then I recently bought one of these housings from Temu and it's made so much difference, It's plastic and quite tough, also has plastic connectors that slide over the joins to keep them together instead of clips. It was only about £4 so i've just ordered another one incase I need a bigger mould.
Oh, never wasted loads of silicone due to ones that didn't work. Haha, annoying isn't it, but the housing definitely does make a difference. I'll have to have a look because the one on the video is flimsy. Thanks for that. Also, thanks for watching and commenting, Evelyn ❤️
Donna, I'm confused....what do you mean by blocking off the pearl so the resins don't cure together? What did you block it with or what/how did you do it? Also, great job! I had already bought a slew of these crystal figurines of animals and flowers, including this same clam to make my own molds too lol. I guess great minds think alike!! 😁💖
I put a thin piece of silicone inside the pearl hole just to cover the entrance because i didn't want the resin in the pearl to cure to the clam shell. So the silicone acted as a barrier. So the little pearl was not connected to the clam upon demold. I did this because I wouldn't have been able to demold it due to the way I cast the clam. Does that make sense???
I just used a very thin piece of silicone that I cut from the moulding that you saw me doing when I took it out of the housing. I inserted the silicone with some tweezers.
I've bought a few things like the clam shell to cast, but i just haven't done any for a while, but I need to try the rest, Gaga. Yes, great minds think a like.
@@dandaresin Yes Donna that cleared it up. I missed the little piece of resin. My daughter was doing tiktok dances in my room while I was trying to watch the video lol.
@@ResinateWithYou OK perfect. Haha lol. My little one is like that always tiktok dancing lol 😆
🫶
❤
@@dandaresin Don't forget pigment paste 😉🤣🤣🫶
@LorE_aka-midwestmemaw8555 lmao lol thank you. I actually would of forgotten.. I need one more reminder tomorrow and can buy tomorrow night lol 😆 I appreciate the daily reminder. I'm surprised anyone even remembered to remind me 😂😂
@@dandaresin I wish I could remember my own shit! LOL. But I got your back!! I'll remind you on tomorrows video, if I remember 🤣🤣🤣. I so enjoy your videos and humor!! Thank you for being you!!! 🫶
BTW, I can't wait to make a mold, I have everything but I can't find what I want to make a mold of, I'm always talking myself out of different items 🤣🤣🤣