I’ve been having stuff installed in my vehicle for years. And I kid you not every time I always had something go bad. I stopped going to audio shops and started doing diy.
Anything worth doing is worth doing right, and doing yourself. Besides, any extra you would be spending on labor can be put toward higher-end equipment.
Thee are a lot of bad places to go to, trust me, once you find a god shop that is fair and does quality work like us, you won't touch your car anymore.
Imagine paying all that money for "quality" parts, only to have a dude throwing boxes around for views. If youre doing that in front of a camera i sure would hate to see what you do when someone's not recording.
I came in for this comment. He obviously does the equipment no favors by slamming it down like that, but the impression it gives to an observer is probably more damaging to the business.
@@audiolux6009nobody wants to bring their vehicle in for warranty work all because of a disrespectful “installer” throwing their brand new, paid for equipment around. You have no defense for this. Lol warranty 🙄
The speakers and amps he already had where good you just sold Him unnecessary stuff to make a sale you could of just re done the install right with the amps and speakers he already had !! It was horrible install but you did more then what was necessary!!
No feet can reach these amplifiers, shorter run to signal and batteries, easier serviceability and dirt isn’t really anything that is flung on the amps under the seat in most situations. This comes from over a decade of us using this method, so we ask you to trust us :)
Hope all the extra comfort features were to his liking before you took away his ability to change them with that new headunit. No reason at all to replace the headunit on these just needed a better line output converter and wiring.
@@squarebodyseth5986 haha OK what features can he not change in his Silverado? The Maestro RR will retain all the features. Including, backup cam, steering wheel controls, all your HVAC controls (through the head unit) and any other settings you could do through the factory radio. Also who tf wants to keep a POS factory radio.
The amps stacked was bull shit but them wires were purposely made long for easy in an out of the amps an the wires looked well managed....nice try tho trying to add to the list of bullshit instal
We are going to disagree, wires long would mean improper disassembly and laziness to have a near tuck install. Amps don’t need to move in and out obviously. Once they are set properly in tune, really, no reason to touch them, regardless, you are entitled to your opinion, and to assume that it was a completely fine, install without having seen it.
![The [ULTIMATE] Silverado Stereo System - Sony AX7000 + Kicker: Interior Build Pt. 3](http://i.ytimg.com/vi/Y_RJmZl34Uo/mqdefault.jpg)
![The [ULTIMATE] Silverado Stereo System - Sony AX7000 + Kicker: Interior Build Pt. 3](/img/tr.png)
I’ve been having stuff installed in my vehicle for years. And I kid you not every time I always had something go bad. I stopped going to audio shops and started doing diy.
Anything worth doing is worth doing right, and doing yourself.
Besides, any extra you would be spending on labor can be put toward higher-end equipment.
Thee are a lot of bad places to go to, trust me, once you find a god shop that is fair and does quality work like us, you won't touch your car anymore.
Imagine paying all that money for "quality" parts, only to have a dude throwing boxes around for views. If youre doing that in front of a camera i sure would hate to see what you do when someone's not recording.
I came in for this comment. He obviously does the equipment no favors by slamming it down like that, but the impression it gives to an observer is probably more damaging to the business.
Your mind would be blown if you seen how fedex and dhl handle all this stuff lmfao what buddy did was nothing
:) the items are still working in this clients car and he still has warranty with us. Maybe we know what we are doing, maybe we just are lucky.
@@audiolux6009nobody wants to bring their vehicle in for warranty work all because of a disrespectful “installer” throwing their brand new, paid for equipment around. You have no defense for this. Lol warranty 🙄
The speakers and amps he already had where good you just sold
Him unnecessary stuff to make a sale you could of just re done the install right with the amps and speakers he already had !! It was horrible install but you did more then what was necessary!!
I’m not sure I’d let you do my install after seeing you chuck and slam those audio boxes
I thought the same thing and actually couldn't get through the video because it was so unprofessional...
You do realize the boxes were probably empty lol
products still working fine to this day. nothing gets hurt here :)
Did the customer take it to a 3rd shop?
There was no need. Satisfaction and quality was achieved :)
@@audiolux6009”did the client watch this video?” is the real question lol
Drywall screws holding the 3" down. LMAO ... 3:14
Right!
No wire ferrule's
drywall screws holding in speakers.
I am not generally for bass knobs but I like that idea. I like my radio to be able to control the bass.
Thats about what mine looked like before i took it in to get done at a shop 😂
Tad rough on the new equipment. Geez!😫
Dude just yeets the DSP on the table 🤣
😂😂😂😂😂😂
😂😂😂😂😂
Do u guys have a full video of everything u did
Need a dual alternator bracket for a 2020 Chevy Silverado 2.7
I'm going through this now with a Ford edge
Thats some Serious shit right there.. Nice job
I bet the owner did the installation lol
Looks like they went to Bobs car audio in Torrance Ca.
Good place to mount amp so it can be kicked and get dirt on it and inside of it. Why not install it behind rear seat on back wall
No feet can reach these amplifiers, shorter run to signal and batteries, easier serviceability and dirt isn’t really anything that is flung on the amps under the seat in most situations. This comes from over a decade of us using this method, so we ask you to trust us :)
I’ll bet the customer installed it
What state are you guys located?
San diego, ca
I'm taking my whip there. I know they going to do some dope work. I'll return here to tell yall how it goes 💯
We are looking forward to it!
How can I get in touch with you I have a 2018 Chevrolet Silverado I like everything that you put in that truck
Reach out to our direct line. We are open Monday-Friday from 9am to 6pm. Our shop line is 6198203778
So how do you get the factory bose to send a frequency below 30hz?
Ill pay you for this answer
You probably can't. You can boost it if it just rolls off. An Epicenter is probably the only answer.
@@caseyturner8773 with a factory amp bypass and aftermarket Audio Control amp with AccuBASS.
How much for a setup like that ?
if you want a setup similar to this, the range is around 5-7k on average
Where ya at bro I need some work done
9551 mission gorge rd santee CA
What's the link for the speaker on the dashboard
I wire everything myself and if I dont like it i changed it myself.
What does something like this cost ?
So wyd about the under seat ventilation? It’s going to be fine in the summer but the winter your going to be blowing +80° air on that mf
Would of taken it to a 3 rd shop after all the new components being thrown and slammed on the table smfh
haha 😂
Are the mids and highs hooked
Up to the head unit or to an amp ?
Hope all the extra comfort features were to his liking before you took away his ability to change them with that new headunit. No reason at all to replace the headunit on these just needed a better line output converter and wiring.
Hmm never heard of Idata Maestro RR, huh?
They dont do the job for what im talking about, learn the vehicle before you spat out nonsense.
@@squarebodyseth5986 haha OK what features can he not change in his Silverado? The Maestro RR will retain all the features. Including, backup cam, steering wheel controls, all your HVAC controls (through the head unit) and any other settings you could do through the factory radio. Also who tf wants to keep a POS factory radio.
No Bose?
The Bose system Chevy puts in there trucks hit so hard 💯🤷♂️
@@TheTexan99 lmfao
Ballpark figure on $$ of this install?
Ranging from around 5k-7k depending on certain choices of components and of course personal preferences
5k to 7k ouch that seems to high
Way too high
You could get better quality for roughly 1k, plus doing your own labor!
What brand 6 by 9 did you use
The amps stacked was bull shit but them wires were purposely made long for easy in an out of the amps an the wires looked well managed....nice try tho trying to add to the list of bullshit instal
We are going to disagree, wires long would mean improper disassembly and laziness to have a near tuck install. Amps don’t need to move in and out obviously. Once they are set properly in tune, really, no reason to touch them, regardless, you are entitled to your opinion, and to assume that it was a completely fine, install without having seen it.
Rath Glen
Hahaha thats kustom I just did the same truck this weekend but I installed 1 high n low adapter with a passive eq 9 band sounded bad as
Ruthie Villages
😆😆👍👍
Yawn