Sweet BJaysus...... full backswing from a man balancing on his haunches while in flip flops! If all his mates still have 2 arms, someone should sign him. Hand eye coordination and balance......100%.
Interesting work. It would be better if the whole rivet was yellow hot then inserted. That way the rivet expands into the hole and contracts when cold giving a much better stronger joint.
Yea that's how it was done. Watching old films on RUclips of the guys building the Empire state building you see a forge on each floor and one guy would pitch a hot rivet up to the riveter and he'd catch it in a metal basket, put it in the hole with tongs and air hammer it home.
You need to grind off the mushrooming of that stamper tool, it will break off and can shoot off like a bullet, it happened to my dad, he had a shard of meddle in him for 20 years, not safe, but nice technique 👍🏻
Nice job. This is just a thought you might want to trim the boogers off your mushroom punch so they don't fly off and hit you in the face just a thought.
Those men one with the torch and other with the hammer they work for years and they know put ribets for long time skills learn for years of "practice" on working!!!! Congratulations good work, hard economical in Pakistán, no easy life, give blessins.
Nice job , hope the rivets hold well and not like the Titanic ship's ... the punch holder can use an extension so he can save his hand..... you wouldn't know when he wins an argument with the guy with the hammer...😄
When I was a kid in the early 60's, my dad and I were eating a sandwich. He started picking a callus he had in the palm of his hand and dug out a sliver of steel that he said must have come from a chisel 5 years prior.
Not even tidy , most of the old ship yards wouldnt have accepted those rivets , they were only hot at the end ,,, real hot riveting has the rivets glowing so they pull in tight as they cool , not just so the head snaps easily. At 4:00 the guys sitting holding the '' hot rivet '' laughable, not incredible.
Not only that, but the rivet has to be hot inside the hole so when it is upset, it expands to fill the hole completely. Just mushrooming the head is not good riveting.
Holding that mushroom headed riveter with bare hand is totally dangerous and not safe... Provide a holding tool or handle for that riveter ... So "Safety first"... Then do any work...!!!
They should really put a handle on that riveting tool. Also grind the mushrooming off... 30 min job could save someone's hand for the rest of there life.
Worked in large maintenance departments for 50 years and never saw any one hot rivet. Another lost trade. I know that the ship yards switched from hot riveting to welding for faster assembly and more dependable. Guess same for all steel i beam building construction.
Judging by the size of that frame it’s a big truck! Those rivets are not big enough especially the way they OVERLOAD the trucks, trains, motorcycles hell even bikes!!
Yeah, god forbid that people are entitled to a fair living wage and a safe working environment. I'm sure you'd agree to work under those conditions and for their pay.
@@christopherlee627 OSHA has NOTHING to do with pay. And as far as a safe working environment, yes that should be an option but you should not be forced to wear anything you don't want to.
You got the oxygen turned up so high it's trying to cut the rivet before it gets evenly heated ... Back off that oxygen just a touch and it'll heat up faster an more even instead of blowing metal off of it.
These are the trucks other videos show that the axel pulls out when they pull it out of the ditch! That’s not near as strong as the rivets that didn’t hold the Titanic together!
И ведь промажет, иного не дано! Металл для ручек дефицит, а рук много, фиг с ними, с руками, следующие найдутся. А вообще, чистой воды дифференциация по мозговому признаку.
That isn't proper hot riveting. The entire rivet has to be glowing ornage hot, then inserted into the hole and then hammered over. Otherwise, the shank of the rivet doesn't shrink at the same rate and as such, in due time the rivet will fail or the riveted parts will move.
No good just heating the end and bashing it over. The whole rivet needs to be hot, so when it cools it contracts and squeeze's the joint tight. These rivets will come loose very quickly.
That’s True! That’s why back in the day you would see Cherry Red rivets getting tossed from Heater to the riveters! Once that rivet cools it ain’t going anywhere!
Ditto - I have done this in shipbuilding where you couldn't get an air jack in, but for regular accessible work, orange to red rivet heat minimum with air jack or lever holdup. The whole rivet needs to be hot to cool/contract and bring faying surfaces more tightly together.
this is not amazing. This technique has been used for more than a century, it has been used in the construction of skyscrapers in the United States, on bridges and more. It is called hot riveting.
Авто/Мото
Trust: 100
I know! 😬😱⚒️
LOL, no shit!!!!!👍
For some reason accurately swinging a hammer like that comes natural if you don't try too hard. You will hit where you are looking.
110%
Sweet BJaysus...... full backswing from a man balancing on his haunches while in flip flops! If all his mates still have 2 arms, someone should sign him. Hand eye coordination and balance......100%.
Interesting work. It would be better if the whole rivet was yellow hot then inserted. That way the rivet expands into the hole and contracts when cold giving a much better stronger joint.
Yea that's how it was done. Watching old films on RUclips of the guys building the Empire state building you see a forge on each floor and one guy would pitch a hot rivet up to the riveter and he'd catch it in a metal basket, put it in the hole with tongs and air hammer it home.
@@rickdaystar477 yep, still happens today with riveted boilers.
I reckon a big boxful of nuts bolts and washers and a 3/4 drive impact gun it would’ve make the job a lot quicker
@@rickdaystar477 air hammers on a skyscraper in 1930s NYC and sledge hammer in 21st century Pakistan...
@@rickdaystar477 just watched that video my uncle done the same he had his own fordge and everything he used to do rivets on equipment and trucks
Feels like resting an apple on my head and waiting for a good sniper 😂😂👍 damn.
You need to grind off the mushrooming of that stamper tool, it will break off and can shoot off like a bullet, it happened to my dad, he had a shard of meddle in him for 20 years, not safe, but nice technique 👍🏻
That's true friendship hold a spike while your buddy swings a 20 pound sledge at your head and arm!
Or unsafe work techniques. Hope osha don't see this.
But if the hammer man misses his target I m telling you that man will lose his arm for ever ..nice job done dangerously
Nice job. This is just a thought you might want to trim the boogers off your mushroom punch so they don't fly off and hit you in the face just a thought.
Yup.. and they will..
What they really need to do is to wear some safety gear ie boots gloves and safety glasses
It makes for a larger target
I squinted when he was swinging that hammer lol makes me nervous
I agree 100%, that's the only flaw in their process, everything else is safe 😅✌🏼
Oh my gosh! I used to cold rivet and hot rivet when I was younger. Lol. This video took me back to the 80’s.
Must admire the dedication of these workers to keep things going.
It's a pretty safe technique, almost impossible to hurt the worker, hahahaha
Those men one with the torch and other with the hammer they work for years and they know put ribets for long time skills learn for years of "practice" on working!!!! Congratulations good work, hard economical in Pakistán, no easy life, give blessins.
Nice job , hope the rivets hold well and not like the Titanic ship's ... the punch holder can use an extension so he can save his hand..... you wouldn't know when he wins an argument with the guy with the hammer...😄
No ppe, rivet set mushroomed , just waiting to send a shard of steel into one of them! Glad I live in Canada 🇨🇦
That guy holding the header has nerves of steel.
Great job as always. Learn a few tips from you Warriors.
I sure these guys can build a killer 50's kustom truck.
I believe I would want a long handle on their button head shaping tool.
Привет из России. Молодцы. Только берегите себя соблюдайте технику безопасности.
что нельзя ручку приварить
I love the sandals and socks on the hammer man.
Very good results using minimal equipment. Kudos to the man wielding the sledge hammer for his near pin-point accuracy.
Not removing the burr's off that mushroom punch can easily take out your eye, or cause serious injuries it happened to me ones split my right ear.
Same here thats the fist thing I noticed when brought into frame
When I was a kid in the early 60's, my dad and I were eating a sandwich. He started picking a callus he had in the palm of his hand and dug out a sliver of steel that he said must have come from a chisel 5 years prior.
If Homie gets that hammer handle caught in his dress someone is losing a paw. 😂
Поражаюсь над доверием к мужику с кувалдой)))
Я бы не доверился
As good as he is with the hammer I think I would weld an extension on the dolly, one miss and his hand is crap
I love those safety shoes they wear Lowe's your feet to breathe, gas it must be expensive he turns the torch off every time
Now that's what trust looks like!
They must be great colleagues / friends trusting him like that.
Can you trust your work mate with that hummer? What if He misses or the Hummer slips. Good luck
Вот оно настоящее братство, чувствовать руку товарища
hi weld a handle on rivet head maker guy with sledge might miss ??
Torch tip too close to metal. Losing efficiency. Torch flame hottest at tip of flame.
По ходу у Пакистанцев имеются запасные руки. 😀
Да походу что паки, что индусы - это целые страны запаски для кого то
Ага, такой безстрашный)))
That's what I call trust ladies and gentlemen.
Not even tidy , most of the old ship yards wouldnt have accepted those rivets , they were only hot at the end ,,, real hot riveting has the rivets glowing so they pull in tight as they cool , not just so the head snaps easily. At 4:00 the guys sitting holding the '' hot rivet '' laughable, not incredible.
Not only that, but the rivet has to be hot inside the hole so when it is upset, it expands to fill the hole completely. Just mushrooming the head is not good riveting.
More amazed by the sledge operator!
This video was riveting.
How Profound
He trusts him wayyy to much 😳😳
Без руки можно остаться
Супер.👍Желаю здоровья и удачи
Great job. Simple tools. But got the job done. Getting the job done is the most important thing, and they did it.
Hhhhhhhhhhhh6
Next video: 3 guys with at least eye patches because the metal beard on the punch exploded!
Holding that mushroom headed riveter with bare hand is totally dangerous and not safe... Provide a holding tool or handle for that riveter ... So "Safety first"... Then do any work...!!!
You have to heat the whole rivet if you want the contraction that holds everything tight.
Производство рамы? Хочется емко охарактеризовать одним словом.
Мы так не сможем никогда. Я - слесарь, мне знакома подобная работа.
Почему не сможем?
@@kirgrinev руки жалко))
They should really put a handle on that riveting tool.
Also grind the mushrooming off...
30 min job could save someone's hand for the rest of there life.
Vocês são ótimos trabalhadores!
It's always amazing to see what is allowed in third world country with out all the OSHA BS we have in the states.
Já pesou se o cara da marreta erra ?
Kkkk tá louco, eu não teria coragem pra colocar minha mão aí na hora que o homem fosse bater com a marreta.
Worked in large maintenance departments for 50 years and never saw any one hot rivet. Another lost trade. I know that the ship yards switched from hot riveting to welding for faster assembly and more dependable. Guess same for all steel i beam building construction.
Judging by the size of that frame it’s a big truck! Those rivets are not big enough especially the way they OVERLOAD the trucks, trains, motorcycles hell even bikes!!
It’s great to see places in earth where OSHA can’t get in the way of getting work done affordably and timely.
I agree, but I still wouldn’t want to hold that rivet set.
Yeah, god forbid that people are entitled to a fair living wage and a safe working environment. I'm sure you'd agree to work under those conditions and for their pay.
@@christopherlee627 OSHA has NOTHING to do with pay. And as far as a safe working environment, yes that should be an option but you should not be forced to wear anything you don't want to.
No gloves, no goggles, no boots, no handles, no hand.... no problem. Can't pay me enough to let someone swing a hammer near my hand. Crazy
Прикиньте он кувалдой промахнется. Я бы рычаг какой приварил к этой клепалке, чтобы по руке случаем не получить
С каждым ударом сердце в пятки уходила. Отмороженные.))
respect too these guys
Tá doido, quantas pessoas já perdeu o braço nesse trabalho aí? É só soldar um cabo nesse pino e trabalhar
Noway I'm doin that on a Monday noway
Sure wouldn't want to be the guy hold that punch 😳
Put your hand were ever you want but.... always keep a clean tip
Working in their pajamas without any safety gear… 😂
Curious as to what you are making rivets from
Mild steel would work
براپرچ زدن پرچ چند سانت از شاسی باید بیرون باشه
Kinda worried they are building the chassis to a carnival ride.
You got the oxygen turned up so high it's trying to cut the rivet before it gets evenly heated ... Back off that oxygen just a touch and it'll heat up faster an more even instead of blowing metal off of it.
These are the trucks other videos show that the axel pulls out when they pull it out of the ditch!
That’s not near as strong as the rivets that didn’t hold the Titanic together!
Were it is located
Как промажет и капец руке, к этой штуковине приварить ручку надо.
Аллах дал , Аллах взял
@@человекдождя-щ4ж на Аллаха надейся, а сам не плошай
И ведь промажет, иного не дано!
Металл для ручек дефицит, а рук много, фиг с ними, с руками, следующие найдутся. А вообще, чистой воды дифференциация по мозговому признаку.
New guy holds the punch.... wtf u can think of that but not something to hold it??!!??!!
У горелки самая высокая температура находится на конце пламени ,а он её приткнул думает так жарче🙄
Так задача нагреть ,а не отрезать
Раньше это было сплошь и рядом, все было на заклёпках, при высшей цивилизации, теперь же это новинка, диковинка 😅😄😃
Подожди скоро и не такому удивляться будут, интересно сколько рук уже отбил этот молотобоец, нет бы держак какой приварить
Ну ,а так то рамы на грузовиках и сейчас на хаклёпках
Good lord get a handle for that punch
I mean these guys are boss, but I feel there is a better way. I hope they guy holding the punch gets paid the most
Автоваз ,ручная сборка
That isn't proper hot riveting. The entire rivet has to be glowing ornage hot, then inserted into the hole and then hammered over. Otherwise, the shank of the rivet doesn't shrink at the same rate and as such, in due time the rivet will fail or the riveted parts will move.
เยี่ยมมาก
Сначало норючку закрывать следует потом кислород
И на кувалдой по руке, ручку приварить к клёпальнику безопасней будет
Should not even be using cutting head on torch. Rosebud tip.
Very wise procedure and NOT the safest way to go about it
Something tells me the guy holding the arbor, doesn’t want to be going a$$ to mouth, minus a hand to eat and wipe with.
one wrong wack
the guy's hand is gone
or a debris would fly off that drift and hurt somebody
És mui corajoso muito bom
OSHA?
just like Mr. Ford used to do
Which mr ford
saan tayo makabili nga revits
Bags not holding the punch....
No good just heating the end and bashing it over. The whole rivet needs to be hot, so when it cools it contracts and squeeze's the joint tight. These rivets will come loose very quickly.
That’s True! That’s why back in the day you would see Cherry Red rivets getting tossed from Heater to the riveters! Once that rivet cools it ain’t going anywhere!
I was thinking the same thing. I used to do rivets the correct way.
Ditto - I have done this in shipbuilding where you couldn't get an air jack in, but for regular accessible work, orange to red rivet heat minimum with air jack or lever holdup. The whole rivet needs to be hot to cool/contract and bring faying surfaces more tightly together.
The mushroom flair on that set down tool makes me cringe for the love of God grind those off
If he misses with that hammer,bye bye hand🖐️
Esto que es?😄😄😄
Not sure how that can work since you are not backing up that rivet at all. I suspect its not a rivet at all but a bolt
The guy inside the frame is using a screwjack to support the bottom of the rivet
What a primitive unsafe work environment with no personal protection equipment. These guys must routinely suffered some very serious injuries.
That will be those new sock looking steel toe protectors then..........
this is not amazing. This technique has been used for more than a century, it has been used in the construction of skyscrapers in the United States, on bridges and more. It is called hot riveting.
Africaaaa
Proof that steel toe boots are overrated. Omg
Just curious why this is “incredible”
Qué confianza ... Ojalá no le pifie
Address