The New🔥Veto TP3B Pouch🔥 Reactions & Review!!
HTML-код
- Опубликовано: 21 авг 2024
- I give my reactions and a review to the brand new Veto TP3B Tool Pouch from Veto Pro Pac. It has one glaringly obvious difference from previous Veto tool pouches.....it stands upright! The new Veto TP3B tool bag includes the polymer base that allows other larger Veto bags to stand upright, as well as withstand a wet/snowy ground when set down. Join me as I give my first impressions, opinions, and initial tool loadout of this slick little HVAC, Electrician or other technician tool pouch! *EDIT ~ There was actually in fact a tape loop strap included with the bag, it was hidden at the bottom of the box with the warranty info......my bad Veto!!
Join the 🔥NOTIFICATION SQUAD!!!🔥 consider subscribing and hitting the "bell" icon for a heads up when new content drops!
My personal troubleshooting bag load out www.kit.co/akhvac
My personal Vaccum kit in a bucket setup www.kit.co/akhvac
My personal Recovery kit in a bucket www.kit.co/akhvac
My pocket HVAC EDC (everyday carry) www.kit.co/akhvac
My HVAC Bearing, Hub and Pulley Removal bag www.kit.co/akhvac
My recommended HVAC books for technicians www.kit.co/akhvac
How I track my RUclips analytics and optimize my channel!!
www.tubebuddy....
CONTACT ME DIRECT----- akhvac@yahoo.com
FOLLOW ME ON SOCIAL MEDIA
Facebook: / akhvacproductions
Instagram: / akhvac
Twitter: / ak_hvac
HVAC Vehicle Layouts Facebook group: / 141116779808715
20% off ALL purchases from SolderWeld!
www.solderweld.us and use the promo
code "AKHVAC" at checkout
DISCLAIMER: This video and description contains affiliate
links, which means that if you click on one of the product
links, I’ll receive a small commission. This helps support
the channel and allows us to continue to make videos like
this. Thank you for the support!
Gotta make a correction! The bag DID have the tape loop strap, it was hidden at the bottom of the box it came in. My bad VETO!
What do you all prefer? Open top pouch or closed?? Let me know👇👇!!!
AK HVAC I prefer my women topless, not my tool bag.
What is the actual name of jumper cables? I’m trying to order mine online as an apprentice and I can’t find anything
Daniel Robbins jumper wires, not cables. Try that. You can type alligator end jumper wire and you should get a result.
AK HVAC Pfft... I use jumper cables. Yeah... they're a little big, 1/2 inch wires, 4 inch jaw. Sometimes when I'm jumping R to Y I'll rip off a few relays and transistors. Not they work great for 24VAC any way. (That's a joke, don't try that new kids :)
I’ve been using the regular mb and I’m looking for something different, what Fluke meter is that ? Thanks
A MB2 with a hard bottom would be the game changer. Make it happen Veto!
I agree!
I definitely agree....
Daniel AGREED....
I am a Licensed Journeyman Electrician. I can see a bag like this working perfectly for me as my EDC pouch I wear all day at the hospital 🏥 I work at. This might fit the bill. Us electricians like having Open Pouches. I have the Veto MCT bag but I don't use that with my Day Job. This was a really great video to see this pouch. Thanks and God bless 🙏.
Jeff
I strongly agree with your idea of MB2 having a hard bottom. Had not thought about that until you mentioned it.
Im not a fan of the metal clip On the TP3B. I prefer the composite clip on the MB bags because they dont scratch wood and equipment cabinets when you hang the bags from the handles and the clip rubs on stuff. As well as the composite clips don’t wear the edge of your pockets or belt out. And they clip better onto the D rings of bigger veto bags.
The pill container is a great idea ! Using the belt loop for your jumpers , and non contact voltage tester !
Veto should offer a buy back program. I bought an MB and they come out with an MB2. I buy an MC and they come out with the MCT Now this! I use an open type bag, the CLC 1526. It holds everything I use. If they would offer a hard bottom on their bag it would be the best out there to me.
I've been carrying an MB2 for about 3-4 years doing high rise work in Chicago. Nothing can replace it. I get to climb, jump, crawl all without worry. I couldn't do that with this. Not with an open top. And attics, where you want a compact bag, no way. I'd be buying new tools every week.
THIS! Oh my god this. The only way I go now in attic is Snickers work trousers with closed pockets, i just bung in what i need to the pockets, close em and go crawling!
Not a fan of open top bags. Hopefully veto puts the plastic bottom on the mb2. I love the weekly pill container idea. I’m gonna go get some of those today 👍🏻
Thanks for the review video! I agree that if Veto comes out with an MB2 with hard bottom that legions of guys will buy it. I love my MB2 and is my go to bag everyday and yes it does suck that it tips over because of how tall it is. The nice thing is that all the tools in the center pouches with the zipper and flaps don’t fall out but my tools in the side pouches do and it’s a pain having to pick them up and put them back in. Looking forward to one day having a MB2 bag that solves that.
Wow I’m a service commercial electrician I think I’m in love !
I got my TP3B a couple of weeks ago now and have been using it this week to save dragging my heavy “tech lc” with me when I only need a few small tools while connecting up electrical db’s. I have been hanging it up right beside the panel where I am working and it has saved me (& my back) from several hundred crouches.
It has had a small Bosch impact driver, 2 or 3 screwdrivers, knife, couple of rolls of tape, knippex grips, pliers, 6” cable shears, side cutters, cable marker application needle, 2 sharpies and a biro. There was still space to spare as the front Velcro pocket was empty as were a couple of tool pockets. The downside was that it does still fall over, especially with the impact in the forward tool holder (where AK had his meter in the vid) Ideally the hard base would be slightly larger so it protruded further forward.
Quite surprising how many tools it swallows up given it’s size. Probably the best pouch of it’s size on the market.
Another great video man ! I love my TP4 but like you said , my biggest complaint as well is that it falls over a lot. But that is now fixed with these hard bottoms which is awesome. Keep up the good work bro !
Close with hard bottom, yes make that happen Veto. As always, awesome info. AK. Keep'em rolling. 👍🏼🤙🏼
I use my TP4 with a shoulder strap as my main diagnostic and small job bag. Veto is coming out with a hard bottom version of the TP4 in the near future. I will be buying it.
when is the tp4b coming out thats gonna be next level up, i was always bitching about the bottom and tilt over issues glad to see company that listen to the end users thumbs up mando a vid on troubleshoot bag for basic calls Thanks as always mad editing Big Thanks Dude keep them coming 👍👍👍😎
I finally bought a TP3 at the beginning of the year, then a month later I saw they were coming out with THIS...DOH!
Same thing happened when I bought my MC back in 2016 - they came out with the MCT within a month, lol
I've only been using my TP3 during the slow months and for Maint. Checks so far this year, but haven't had a huge problem with it falling over - I usually just lay it on it's back if i'm on a rooftop unit or in an attic OR hang it off of the disconnect when working on a Condensor.
I think the MB2 is gonna get her man back. ❤️
Look forward to the future review! I'm really still feeling my MB2 so far my primary go to with the tech LC is the big back up
The only issue is , it will be a snow / rain magnet , would be much more in love if it had a removable flap .
The tension will keep you out of the clubhouse for sure, have Tp3/Tp4 but keep overloading them, can't help myself, attached Klein's curved/padded strap and works great.
I am waiting on the tp4b and see what kind of room I can get out of it. Great video as always. Devil dog 👍.
Good small service bag! NOW to get Veto to just send me one! Lol thanks for review man!
Great Review AK. I put a Shoulder strap on my MB2 and my old TP3. . I hope the come out with A Hard bottom TP4 .
I've seen on Instagram that they are aiming to release the hard-bottom TP4 in Fall of this year or maybe early 2019
I've currently got an MB-2 and an MC. I use my MC everyday as my go to service bag, but I like the idea of this bag, might have to give it a try!!
Wow man your vids are getting better. Thanks the review
Thanks for watching man👍👍!! Appreciate the support🍻
Always look forward to your vids. Great looking product mine is coming. Totally agree do a hard bottomed MB
I love the Mb2, the hard base would be a much needed upgrade. nice review looking to see how it withstands the test of time.
Hey Andrew. How y'all doing? How about the hard bottom on the MB2. I like having the tool bags with the ability to close and not leave the tools exposed. Great video. Have a great week. God bless.
Blaze Eisner thanks for watching Blaze! I always preferred closed too as well
Wished I had held out, just bought a tp4 two weeks ago. Hard bottom is where it’s at. Get some electrical tape to hang off the side and your set.
that was awesome Andrew, I predict veto is going to sponsor you soon .the only thing missing is the electrical tape strap!
Gecko HVAC dude it was there! I screwed up, it was loose in the bottom of your box after checking again! Made a note of that in the video description, unfortunately I had already posted the video before realizing👍
That's a relief! I noticed on their website it says it comes with a tape strap so I was a bit confused after this video
Why does Veto keep doing this to us ? Every time I break up with them , here they come back with something new , then I have to go crawling back ... dang them !!! lol ... good vid ...
Good review , nice bag ! The issue I personally have with any open topped system , is vulnerability to rain and snow . I’m thinking of getting a second MB2 , as a service tool bag , my first one is chock full of meters and accessories .
Love the Mb2!! Still my all time fav
Thanks for the review. I use a tp3 and mb2. I really like the hard bottom on the tp3b guess I’ll be spending more money.
I got mine free and I love it love it love it.
Good Video Brother. Great Idea using the pill container. I'll have to try that.
Dang! As you were loading that pouch with tools, I thought you were taking them out of mine. Almost every tool is the same thing I carry. I’ll get that pouch next. I have been happily using some pouch I got from menards. But it’s getting holes in the bottom. Normal wear.
Ditto MB2 bag with hard molded bottom. Good video thanks
😁...5:12.....awesome ....whole editing...awesome review ...
Thanks for watching man👍👍!! Appreciate the support🍻
I look forward to getting mine in the mail
I just wanted to let you know there is another pocket. You can open the flap where you can hang your tape measure.
Yes sir thank you, I had totally forgotten to open it during the filming👎
I like it , thanks for the review AK!
The mb2 I think is a better bag. But the way you have it set up looks interesting.
I saw a post from veto that MB hard bottom is in the works. There's also a picture of the TP4 hard bottom on their instagram. I'm rocking a fieldpiece hs36, it doesn't look like that would fit well in a TP bag...
Another note, is the klein slide drive multi still too new for most people to have found one? It isn't at any suppliers in my hood yet. I've also noticed that Klein has taken their multi-bit that fits into an impact off the market - just after I realized that it exists. I hope it comes back, I'm tired of having a rattling pocket full of bits
How has this bag treat you AK? The bag looks nice
I carry the Veto MC in my truck and a clc zippered top bag about the size of the Veto MB. The clc just has the pocket layout that works perfectly for the tools I want to have with me at all times and it stands up on it's own. But the material around the zipper is starting to get hung up making it difficult to zip after about a week of use, annoying. Been on the fence about the Veto MB but I love my MC and know the Veto quality. I was thinking if they made a smaller version of the MC that would be cool tool. Im gonna give the clc a couple more weeks but I will probably end up with the mb bag.
Lmao at the Mickey Mouse bit and the MB2 creeping behind the bigger bag. What is that Wiha driver that you have?
Michael Martinez I bought a whole insulated Wiha driver set a few years ago. Love them. The one in the video was the thermostat sized flathead. Thanks for watching👍👍!!
AK HVAC thanks man I’m checking them out on Amazon. Your videos are top notch, I’ll keep watching!
Do you think just adding a hard bottom to the mb-2 will keep it from tipping. I kind of think they would have to make it a little thicker to offset the height. Not necessarily a bad thing in my opinion as long as they don't go crazy.
Great review. Veto does have the spring special right now and if you buy some of there larger bags you are able to get the tp3b free.I am torn right now between the tech mct or the tech Mc. I am leaning towards the tech mct
Cory Desormeaux I have the Tech MC, it’s two inches shorter than the MCT, otherwise practically the same. 👍
Go bigger, you can always put less tools in. You can't make your bag bigger.
I bought the techpac camo because I like the backpack style and got sick of the weight always being on one shoulder
Veto TP3B looks durable ..Don't take lip, of that hack in the Van.
Just got mine the other day haven't put it to use yet
pretty sweet.....til the rain comes
Definitely a concern...I've never had an open top bag for that reason till now.
AK HVAC they could add a top cover and it would be perfect. basically the mb2 with a hard bottom
No one likes to get their tools moist💦😹Great vid AK👌
Jon HVAC, this wins HVAC internet today.😁
Looking forward to seeing how it holds up
Question can you fit a 12 volt drill in the bigger pocket
👍👍
After time do you still use this bag? Referred back to your video and am considering one.
Jim Thorpe its a great little pouch, but gave it away and am currently using the TP4B instead as my daily “small bag” 👍 both are great choices, but I just wanted a tiny bit more room
@@AKHVAC AK, thanks so much for your quick reply. I saw your earlier vid on the mb2 and thought that that looked a bit bigger and more usable. I'll check out the TP4B. I want to again thank you for all you great vids. Your not only a talented tech, but your persona and personality are excellent for teaching and portraying great videos. I have 17 techs in the New Orleans area and forward many of your vids to them on a weekly basis. Its nice to see someone embrace their trade. Your enthusiasm is contagious and it helps me motivate my guys. If your ever in NOLA, please look us up! Cya you later!
Can you fit a 12 volt impact drill inside or attach to side
Which meter are you carrying in this bag Andrew? I know it's a fluke but just wondering?
Denver Baker It’s a Fluke 902👍
The bag with the wig was creepy lol
Wish it was not an open top.
Rob HVAC not something I’m used to either. We’ll see how it works out! Thanks for watching dude👍 hope you’re good Rob!
Where do I get the solderweld hats???
Derick Kenny www.solderweld.us Try using my “AK HVAC” promo code for 20% off! (I know it works for all the brazing products, never had anyone try it with the hats). Let me know if it works for you👍!
it looks like the flap you clipped your tape on opens up. or am i just seeing things, you didnt show it open
Michael Markham yeah it’s a small pocket up front, forgot to get into it👍
ok awesome it was driving me crazy man lol i was sitting next to my wife and i was like what about the front pocket, what about the front pocket. i even looked up the bag and the description didnt mention it. It was driving me crazy thanks for clearing that up. i am going to buy the bag and give it a try but its not available for delivery until late june early july. thanks again AK
@@randomrefrigeration4564 same!
update please 2020
I think I could come up with an aftermarket flap , and the mod would’nt be a warrant voider , totally reversable !
Anybody know where I can preorder this online in Canada?
I believe it is out of stock at this moment
AK HVAC damn, thanks for replying
Hey man. Can you message me? I’m trying to find where to buy this bag. Can you send me a link?
Hey buddy I checked and looks like the bag is out of stock temporarily, I'd check back on their site or Amazon here soon
😂😂😂😂
hard Top Bottom? LOL
Hilarious