You're a good business man, and a great person at heart. You treat your employees as if they're your family. That's not something a lot of people have these days. I look up to you a lot
Anel's long-screw damage looks like a really painful reminder of one more thing to avoid. Thanks for the visuals, I did not predict that it would be as graphic, but it is still very educational and to the point.
I got it right! As soon as you said, "No green light," I thought, "Check the one wire circuit!" I feel empowered by your content. Thanks. I'm actually learning this stuff.
I just wanted to say thanks for all these videos Louis. I don't work on computers at all, but I do use troubleshooting (of a kind, not electronics) everyday. I have learned more on how to troubleshoot with out loosing hair and teeth than anything I was taught in school. I cannot express how much I appreciate that.
Honestly the best troubleshooting methods I learned were in the Navy, it was electrical but it applies to mechanical and control systems as well. You start by asking what the symptoms are then you start at a high level and ask what functions are involved in this. then you identify a point somewhere in the middle where you can test if it's giving the expected output and you test there. From there you rule out the known good side and split the unknown side in half to try to identify the faulted circuit and you just keep repeating until you get to a component. From the component you work outwards confirming there's no additional damage. An important note is that you should never test anything without an articulable reason, at that point you're just guessing instead of troubleshooting
Classic shorted MLC cap. I've done 3 or 4 videos on those, nasty, they like to release the magic smoke. And those stupid schematic net names on the line instead of having a branch off line to make it obvious it goes somewhere else.
I will always try to hear someone out if they have good advice as long as they genuinely seem like they are trying to be helpful and informative. I don't care what other ideologies they hold.
I have no idea why I keep watching these videos..love the bike ride through New York, love the real estate videos, love the board repair videos. I will never do board repair, but love just gaining an understanding of anything that interests me. But today, to hear Louis explain how political affiliation is not important to gaining an understanding of what interest you, that is the reason I keep watching. To continually hear how people continue to dislike someone for who they support politically just amazes me; they are so influenced by what others think and they build a hatred of people for their own lack of open mindedness!
Love your most recent videos relating to real estate, its not really something i need to know, but i love seeing those videos and seeing that there is honest people out there, that actually cares, and are just waiting to get their prime time.
You're a good man Mr. Rossmann. You remind me of the owner of Comstar, Kevin Flounders, my telecommunications vendor for 25 tears. He's one of the most honorable people I know. Best wishes to Anel. He seems to know that calm seas never made a good sailor.
Hey Louis , the repair thing only applies to domestic products like washing machines and tumble dryers . The wording states "Appliances ". The manufactures will only have to supply repair shops , not individuals . Its a start but not what everyone wanted . The manufacturers talk about liability but you can take a washing machine apart and electrocute yourself without access to parts so that is a nonsense. There was something in the article about the fact that some products break when just out of warranty , theres a surprise . One little chip with a countdown timer built in and away you go
Your points about Scott Adams having good advice for you even though he has views some may disagree with is like saying the Thriller album sucks now that we know M.J. OD'ed to death.
are u watching the Microsoft Surface event right now? big change.. they are making their laptops modular and repairable! also their keys will have more travel. looks like they really learned Apple's lessons XD
Anels case: Watch out for double billing (medical bills), and some people from the other side of the case may be stalking Anel (taking pictures etc.) to prove he’s “faking”. A Relative of mine went through the same thing in a car accident case. Record all injuries and future problems that can occur from said injuries (pictures, x-rays, written documents etc.). Make duplicates of all documents DO NOT GIVE ORIGINALS. It’s during this time allot of creeps come out of the woodwork.
Every time you started doing christmas things I started twitching because I've seen both the local walmart, and lowes both putting christmas crap out as of two weeks ago.
Paul Daniels flex boardView is worth the $139.00USD i played with the trial version and bought it... the licensed / registered edition is awesome the software is the best I've found repairing consoles is a hobby... mainly when someone tries to remove the chip and put it in different console if the modded one breaks down.. don't try to move the chip from one broken console to another people think they need to solder the wires to the same place on a ps2 or ps one .. before they check the functionality of the used console...
Well said Lewis! How can anyone be so arrogant as to dismiss someone's accomplishments or teachings because they have different political beliefs from your own! This is America! Anyone can like or dislike any politician they chose without fear of reprisals! I watched a 65 year old school teacher throw a drink on another lady just because of the political shirt she was wearing, never thought I would witness things like this in my lifetime.
I can understand that viewpoint in general, but Trump is a bit of a special case. At this point, Pro-Trump/Anti-Trump is not just about liking or disliking a politician. It has become a fundamental, nearly irreconcilable division between two separate perceptions of reality. If you think up is *that* way, and the other guy says "no, up is *this* way" (and points in the opposite direction), would you take their advice on anything?
@ Mike. About resistor colour code. None on surface mount. Worse, 0603, 0402 and 0201 are too small to have anything written on them. M. Multimeter is your friend. That and proper labelling of you storage.
That new right-to-repair law in the EU only applies to appliances (for now). It's a good step in the right direction, but only a small one in the grand scheme of things.
Just an update on the repair bill they are working on in the EU right now. It is intended to make devices repairable at all and make spare parts available at all. Sadly I think it means it is sufficient for the vendor to have spare parts available for their products and their repair facilities. And right now the bill is also mainly on larger appliances, the ten years are intended for like dishwashers, washing machines etc., For s aller Things it is 7 years I think. Not perfect, but still better than scrapping a broken device after 3 or 4 years because no spare parts are available
It's the 20th video I see. I don't like Apple, I would never buy an Apple product, I'm studying computer science and I would never work on electronics or hardware of any kind, but I found your videos interesting on finding how things work (it's like debugging a programs code but with circuits 😂) and I personally like your POV topics that you talk about 💪💪💪
It's interesting to hear Louis say he's not in it for legal changes and now he's hiring lobbyists. Understandably the conditions have changed with the megacorps just trying to make third party repair essentially illegal. It's just you never would have guessed that's where he'd end up testifying in front of state legislatures and hiring lobbyists and such.
Surface mount components sometimes (or used to?) have numbers indicating value and color coded for type. black with 100 would mean 100 ohms, black with 4.3k would 4,300 ohms. Yellow is caps, and were numbered in microfarads.
As long as the real estate agent is on-site, you can bring the architect/designer to take measurements without having a signed lease. At least that’s how we architect-y people do it here in Texas. Manhattan law might be different. Were I closer, I’d gladly draw up some plans for you.
My first response when you told us what the MacBook wasn't doing was actually *sigh* "check PPBUS_G3HOT" and I'm pleased to know I was on the right track there.
Looks like you could have just connected pins 1 and 2 on that diode after ripping the pad. They are normally connected together on the board anyway and it looks like there is no trace running anywhere else from that pad.
That diode is rated @ .3 amp, circuit had .4A so it sat on the charger overnight after it died. Might say something about not leaving a none working device on charge in future videos.
Hi, love the channel. Do you by any chance know how to get Touch ID working on a MB Air 2019 after swapping the logic board? It seems disabled for security reasons maybe since it’s repaired by me, a non authorised repair. Apple should be able to reset it but of course is unwilling. Thanks in advance
Louis you miss a bunch of Superchats. you should get a system that lists them in a queue, maybe a machine near your desk that would print them out on paper tickets.
Ultra He did... Tl;dw DO NOT BUY ONE! And I think this would include the 2019 models, because they're the same as the last few ones... except for minor details. The main problems still hold up... Which is sad because the 2019 macbooks look like pretty good value.
LordvanDarc sadly I need a new laptop and also need a mac for ios development so i was hoping to kill 2 birds with 1 stone... maybe will get a normal laptop and a used mac mini instead?
Ultra i'd say get the base Macbook Pro, it's great Value and you have 4 years of warranty on the keyboard.. Or do as I did, buy an old(er) Macbook like a 2012-2015 11/13" Air...they start at 250$ I think. But I'm not into iOS development so I don't know how much power you need to work comfortable. But videoediting works fine even on my 2010 white Macbook :D cost me 150$ ^^
Love your videos, Watch them as often as I can. Next time I make it back up to NYC I would love to drop in and say hello. I have been an Apple/Mac user since 1986. Needless to say I am a diehard Apple fan. Recently I have been in the market to buy a (used) MacBook Pro. But now watching your videos, I am scared shitless to do that. I'm looking at a mid 2012 15" MacBook, MD103LL/A . Tell me if I'm absolutely crazy to buy this.
There is one common issue on that 2012 15", the chip that provides power to the GPU comes desoldered from the board, and then when intensive tasks occur, then the Macbook will shutdown.
That's great news about Anel, glad to hear that he's getting better so quickly. P.S. Is Australian software written upside down? And if you tip it over do the electrons fall out?
I have a weird problem with my macbook pro 13 Mid 2012, it turns on and detects hard drive, and works fine if I remove the bottom cover by unscrewing the screws, and as soon as I put the cover back, it show that Folder icon with ? when i turn it on.
am I missing something, or that jumper wire is completely unnecessary? the diode package has two diodes inside sharing the output, and their inputs are just commoned together to increase the current capacity, as you can clearly see both on the schematics and on the board itself during the first try. It was enough to just put a solder blob between the pins or run a couple millimeters of wire.
If I recall correctly, people came to Australia from England a looooong time ago and created a british colony and here in Sweden we're taught the british English in school so therefor we also pronounce the words solder (not sodder) and aluminium (you say aluminum, but I don't know where that comes from) different since that's how the british English is written. www.languagetrainers.com/blog/2016/06/27/how-and-why-british-australian-and-american-english-are-different/
He scratched sorry into this man's board, as an apology for scratching his board. The absolute mad lad.
Better that than to download the Bieber video "Sorry" to the owner's desktop afterwards... 😜
we have a nux fan
"Sorry =(" actually :3
It's ok as he also burned it and had to add a jumper wire because the second blow burned down a pad. The board deserved that apology.
Somebody watches MTG Originals...haha
You're a good business man, and a great person at heart. You treat your employees as if they're your family. That's not something a lot of people have these days. I look up to you a lot
I found the Alan phonecall very wholesome
Anel's long-screw damage looks like a really painful reminder of one more thing to avoid. Thanks for the visuals, I did not predict that it would be as graphic, but it is still very educational and to the point.
@@TheLeathal0ne find more Apple PPbuses so that Louis can relax at home with his GF
@@TheLeathal0ne was there actually sth of your PPBus visible/perceptible on the xray? Thought this thing only shows bone(r)s (pun intended).
I got it right! As soon as you said, "No green light," I thought, "Check the one wire circuit!" I feel empowered by your content. Thanks. I'm actually learning this stuff.
I just wanted to say thanks for all these videos Louis. I don't work on computers at all, but I do use troubleshooting (of a kind, not electronics) everyday. I have learned more on how to troubleshoot with out loosing hair and teeth than anything I was taught in school. I cannot express how much I appreciate that.
Honestly the best troubleshooting methods I learned were in the Navy, it was electrical but it applies to mechanical and control systems as well. You start by asking what the symptoms are then you start at a high level and ask what functions are involved in this. then you identify a point somewhere in the middle where you can test if it's giving the expected output and you test there. From there you rule out the known good side and split the unknown side in half to try to identify the faulted circuit and you just keep repeating until you get to a component. From the component you work outwards confirming there's no additional damage. An important note is that you should never test anything without an articulable reason, at that point you're just guessing instead of troubleshooting
Classic shorted MLC cap. I've done 3 or 4 videos on those, nasty, they like to release the magic smoke. And those stupid schematic net names on the line instead of having a branch off line to make it obvious it goes somewhere else.
I will always try to hear someone out if they have good advice as long as they genuinely seem like they are trying to be helpful and informative. I don't care what other ideologies they hold.
at the very least, you will hear another reason why something is wrong...
I have no idea why I keep watching these videos..love the bike ride through New York, love the real estate videos, love the board repair videos. I will never do board repair, but love just gaining an understanding of anything that interests me. But today, to hear Louis explain how political affiliation is not important to gaining an understanding of what interest you, that is the reason I keep watching. To continually hear how people continue to dislike someone for who they support politically just amazes me; they are so influenced by what others think and they build a hatred of people for their own lack of open mindedness!
Love your most recent videos relating to real estate, its not really something i need to know, but i love seeing those videos and seeing that there is honest people out there, that actually cares, and are just waiting to get their prime time.
@16:45 Very smart advice right there. If only more people could take that kind of approach with information.
Wait, I thought this was a commercial real estate channel. I want my deposit back.
You beat me to this!
@@cornelious2 I'll beat you with a deposit calculated by the last three months rent of a 10 year lease, pal.
Look at this guy, expecting a security deposit back
What the hell? Why is a NY real estate/cat channel doing repairs?
You're a good man Mr. Rossmann. You remind me of the owner of Comstar, Kevin Flounders, my telecommunications vendor for 25 tears. He's one of the most honorable people I know. Best wishes to Anel. He seems to know that calm seas never made a good sailor.
Thanks Louis! Sometimes I assume things also even though I know better! Glad to hear that Anel is getting better.
Great to hear the call from Alan, and giving him the Rode mike really helped his vids!
@25:30 ... Louis lets the smoke out. Oops! Very impressive that was not edited out but used for a teaching moment. Thank you Mr. Rossmann.
Hey Louis , the repair thing only applies to domestic products like washing machines and tumble dryers . The wording states "Appliances ". The manufactures will only have to supply repair shops , not individuals . Its a start but not what everyone wanted . The manufacturers talk about liability but you can take a washing machine apart and electrocute yourself without access to parts so that is a nonsense.
There was something in the article about the fact that some products break when just out of warranty , theres a surprise . One little chip with a countdown timer built in and away you go
Best wishes and a speedy recovery Anel!
I just replaced my phone micro USB socket with an automotive heat gun so basically we're in the same business
Seems to me that it would be harder to charge using an automotive heat gun ;)
@@cornelious2 actually yes, because the tips, flow and heat are not adjustable but that was all I had.
@@westsenkovec it was a joke the way you wrote it could be read that you took out the USB and put in a heat gun.
@@cornelious2 Yeah, that was my initial reaction too. Thanks for pointing out the multiple interpretations. 😎👍
Let me show you some fantastic buildings we have to lease
Got to love the MacBook schematic how they split lines.
When you have a short, always check you removed it. Something Luis often does.
"When you have a short always check you remove it " . does that apply to midgets and dwarfs as well ??
Not politically correct , i know
25:30 For some Apple Smoke
Because of how my brain is wired I now want applewood smoked bacon...
Obligatory "Don't breathe this"
25:25 "Fire"
Humming Christmas Music? It's not even Halloween yet! I'm TRIGGERED! LOL
This channel is the equivalent of your dad telling you about his life philosophy while fixing your bike.
The Paul Daniels jokes never ever gets old
Your points about Scott Adams having good advice for you even though he has views some may disagree with is like saying the Thriller album sucks now that we know M.J. OD'ed to death.
that cap was between the U7100 and ground with the diode between power and the vcc of U7100.
so good to replace it also
are u watching the Microsoft Surface event right now? big change.. they are making their laptops modular and repairable! also their keys will have more travel. looks like they really learned Apple's lessons XD
This was a very nice video, but i need my real estate/new space fix
Congrats louis on the 978k. Keep it up!!!
Keep up, 987k.
@@ChannelReuploads9451 i read it so quickly i messed up
A Reddit and Subaru sticker in one. Interesting combo
I'm sure it's the snoo for a subara subreddit
Snoobaru
@@craterglass imposibru
And that on a macbook Oo
Hope Alan gives Louis a part time realtor job. 😃
i agree, Louis has too much free time.
Board repair on the Rossmann Real Estate channel?! No way! :P
But seriously though it'll be nice to see you in a space bigger than a small shed.
It'll be another year or 2 b4 they are in there
Anels case: Watch out for double billing (medical bills), and some people from the other side of the case may be stalking Anel (taking pictures etc.) to prove he’s “faking”. A Relative of mine went through the same thing in a car accident case. Record all injuries and future problems that can occur from said injuries (pictures, x-rays, written documents etc.). Make duplicates of all documents DO NOT GIVE ORIGINALS. It’s during this time allot of creeps come out of the woodwork.
Every time you started doing christmas things I started twitching because I've seen both the local walmart, and lowes both putting christmas crap out as of two weeks ago.
Paul Daniels flex boardView is worth the $139.00USD i played with the trial version and bought it... the licensed / registered edition is awesome the software is the best I've found repairing consoles is a hobby... mainly when someone tries to remove the chip and put it in different console if the modded one breaks down.. don't try to move the chip from one broken console to another people think they need to solder the wires to the same place on a ps2 or ps one .. before they check the functionality of the used console...
love alan for asking for advice on YT
Can't decide what I prefer, Macbook repair, or Mr Clinton.
this no briner mr clinton lol
Well said Lewis! How can anyone be so arrogant as to dismiss someone's accomplishments or teachings because they have different political beliefs from your own! This is America! Anyone can like or dislike any politician they chose without fear of reprisals! I watched a 65 year old school teacher throw a drink on another lady just because of the political shirt she was wearing, never thought I would witness things like this in my lifetime.
I can understand that viewpoint in general, but Trump is a bit of a special case. At this point, Pro-Trump/Anti-Trump is not just about liking or disliking a politician. It has become a fundamental, nearly irreconcilable division between two separate perceptions of reality. If you think up is *that* way, and the other guy says "no, up is *this* way" (and points in the opposite direction), would you take their advice on anything?
*At **31:08** initiate slow clap* I'm reminded of a wooden plaque my grandmother had hanging on her wall, "The hurrier I go, the behinder I get."
@ Mike. About resistor colour code. None on surface mount. Worse, 0603, 0402 and 0201 are too small to have anything written on them. M. Multimeter is your friend. That and proper labelling of you storage.
I have made a note of this video and the timestamp so when I make a visit to NYC, I can pull it up and accept the challenge. =D
That new right-to-repair law in the EU only applies to appliances (for now). It's a good step in the right direction, but only a small one in the grand scheme of things.
Just an update on the repair bill they are working on in the EU right now. It is intended to make devices repairable at all and make spare parts available at all. Sadly I think it means it is sufficient for the vendor to have spare parts available for their products and their repair facilities. And right now the bill is also mainly on larger appliances, the ten years are intended for like dishwashers, washing machines etc., For s aller Things it is 7 years I think.
Not perfect, but still better than scrapping a broken device after 3 or 4 years because no spare parts are available
I wonder if a mini-split A/C would be better: no ductwork. But it would probably cost the landlord more, so I don’t think it’ll happen
got to love the union state red tape
Aussies say 'SOLDER' because they are doing their best with the Queens English. Pronunciation is everything.
We say Solder, because the american way is too much like 'Sodemy'.
@@ChannelReuploads9451 I thought it was due to the fact it is spelled solder
@@alexku8452 So Louis would say 'Sodiers', refering to the Armed Forces ?
@@alexku8452 Solder, Sodder.
What is that video where you captured the pch fart, was that board repaired by Paul?
All the best to Anel. 🍕🍕🍨🍻
It's the 20th video I see. I don't like Apple, I would never buy an Apple product, I'm studying computer science and I would never work on electronics or hardware of any kind, but I found your videos interesting on finding how things work (it's like debugging a programs code but with circuits 😂) and I personally like your POV topics that you talk about 💪💪💪
good work as always
It's interesting to hear Louis say he's not in it for legal changes and now he's hiring lobbyists. Understandably the conditions have changed with the megacorps just trying to make third party repair essentially illegal. It's just you never would have guessed that's where he'd end up testifying in front of state legislatures and hiring lobbyists and such.
Yesterday I replaced a charging port in a samsung laptop with a heatgun and flux thanks to your videos!
Wow! You mentioned Tekserve! 😂 R.I.P Tekserve!
Your videos are Always interested:)
Surface mount components sometimes (or used to?) have numbers indicating value and color coded for type. black with 100 would mean 100 ohms, black with 4.3k would 4,300 ohms. Yellow is caps, and were numbered in microfarads.
I hope Anel recovers well, I understand how frustrating it is to have an injury that makes it difficult/impossible to walk. It's pretty fucked.
Considering the mentioned EU law: According to a BBC article, "the rules apply to lighting, washing machines, dishwashers and fridges." :(
The lesson: always check if shorts are gone after removing a short.
if you never wear shorts then this isn't a problem.
@@tohopes damn 300IQ'd
I have pants that I can unzip the legs.
yes, occasionally people may wear more than one pair! ;P
As long as the real estate agent is on-site, you can bring the architect/designer to take measurements without having a signed lease. At least that’s how we architect-y people do it here in Texas. Manhattan law might be different. Were I closer, I’d gladly draw up some plans for you.
My first response when you told us what the MacBook wasn't doing was actually *sigh* "check PPBUS_G3HOT" and I'm pleased to know I was on the right track there.
Alan is awesome.
Looks like you could have just connected pins 1 and 2 on that diode after ripping the pad. They are normally connected together on the board anyway and it looks like there is no trace running anywhere else from that pad.
Alan cameo. Nice.
LMAO that was the best intro I have seen in awhile!
I am wondering, where that racing video go. Cant find it anymore on your channel.
Is it just me or do some of the videos on youtube have absolutely no audio and i haven't found a fix for it yet. Any ideas?
That diode is rated @ .3 amp, circuit had .4A so it sat on the charger overnight after it died. Might say something about not leaving a none working device on charge in future videos.
i found a 3 day old black kitten ages ago. it was smaller than a mouse. i named him panther. he grew to be uuuuge and attack my gfs ankle every day!
That is the Fukushima of diodes.
forgot to resolder the resistor left from the cap where the diode blew. that works without it?
Is it wrong to want to take a tooth brush to some of the boards you show before beginning the repairs in some spots?
Fire happens @25:15
Christmas time !
can you link Allen's channel? I want to see it grow.
ruclips.net/video/YgEoBGK0cTc/видео.html
Best to Anel. Are those screws Pentalobe?
You need to run for office Louis! Seriously!
Great stuff
PPBUS!!!!
Also are those screws to keep the pelvis all together?
0:19 lmao
what kinda sticker was it i couldnt understand
The reaction when he fucked up with the hospital sticker in his shirt
@@heccerda whats the point of hiding it here while it's still up on the streaming channel?
@@Nebbia_affaraccimiei Many more people watch it here. Me included.
OMG a board repair vid? You took a break from your realty explorations and dealings =)
You didn't meter to see if the short was gone? Oh well, entertaining smoke was had.
Hi, love the channel. Do you by any chance know how to get Touch ID working on a MB Air 2019 after swapping the logic board? It seems disabled for security reasons maybe since it’s repaired by me, a non authorised repair. Apple should be able to reset it but of course is unwilling. Thanks in advance
You probably have no chance if you have replaced something tied to the motherboard . Most likely the same set up as the iphones
If you don't have the Touch ID sensor from the new logic board, then you can't get Touch ID back on your Macbook.
Louis you miss a bunch of Superchats. you should get a system that lists them in a queue, maybe a machine near your desk that would print them out on paper tickets.
I answer every single one in the livestream, but many of them have 20 minute answers I can't include in an edited video.
Get well, Anel. (rhymes) You're gonna be a wealthy man. Your injury is worse than mine was.
The magic smoke!!!
Has louis given recommendation on macbook pro/air currently on sale?
Ultra He did...
Tl;dw
DO NOT BUY ONE!
And I think this would include the 2019 models, because they're the same as the last few ones... except for minor details. The main problems still hold up...
Which is sad because the 2019 macbooks look like pretty good value.
LordvanDarc sadly I need a new laptop and also need a mac for ios development so i was hoping to kill 2 birds with 1 stone... maybe will get a normal laptop and a used mac mini instead?
Ultra i'd say get the base Macbook Pro, it's great Value and you have 4 years of warranty on the keyboard..
Or do as I did, buy an old(er) Macbook like a 2012-2015 11/13" Air...they start at 250$ I think.
But I'm not into iOS development so I don't know how much power you need to work comfortable. But videoediting works fine even on my 2010 white Macbook :D cost me 150$ ^^
Yes... don't buy them! If you do need a Macbook, he recommends MacBook Airs before the Retina refresh... MacBook Pros from 2013-2014.
hihi217 thing is I need quad core cpu so airs are out entirely. 16GB ram also. Ssd also.
Love your videos, Watch them as often as I can. Next time I make it back up to NYC I would love to drop in and say hello. I have been an Apple/Mac user since 1986. Needless to say I am a diehard Apple fan. Recently I have been in the market to buy a (used) MacBook Pro. But now watching your videos, I am scared shitless to do that.
I'm looking at a mid 2012 15" MacBook, MD103LL/A . Tell me if I'm absolutely crazy to buy this.
There is one common issue on that 2012 15", the chip that provides power to the GPU comes desoldered from the board, and then when intensive tasks occur, then the Macbook will shutdown.
Watch louis' video about what macs he suggests and what's wrong with what model
please check out the new surface laptop, they now have a modular design
Did you leave your helmet at his place the way women do "the leave behind" after a date?
Please relay our best whishes for a fast recovery to Anel. From some guys on the internet completely unkonwn to him, but still...
That's great news about Anel, glad to hear that he's getting better so quickly.
P.S. Is Australian software written upside down? And if you tip it over do the electrons fall out?
It's not upside down, but the code does go backwards like their toilet flushes
I have a weird problem with my macbook pro 13 Mid 2012, it turns on and detects hard drive, and works fine if I remove the bottom cover by unscrewing the screws, and as soon as I put the cover back, it show that Folder icon with ? when i turn it on.
runs perfectly when completed.
Please don't make fun of australians because i am one and i like your videos.
Does Anel have insurance coverage either personally or via your employer benefits? If not then can he cover his hospital costs in the short term?
Wow fire 😱😎
30:02 hmm... Mysterious looking thin silver metallic type thingy I guess you can say "jumper wire" from a cap to unknown? Or is that just me?
am I missing something, or that jumper wire is completely unnecessary? the diode package has two diodes inside sharing the output, and their inputs are just commoned together to increase the current capacity, as you can clearly see both on the schematics and on the board itself during the first try. It was enough to just put a solder blob between the pins or run a couple millimeters of wire.
If I recall correctly, people came to Australia from England a looooong time ago and created a british colony and here in Sweden we're taught the british English in school so therefor we also pronounce the words solder (not sodder) and aluminium (you say aluminum, but I don't know where that comes from) different since that's how the british English is written.
www.languagetrainers.com/blog/2016/06/27/how-and-why-british-australian-and-american-english-are-different/