I picked up this tool to adjust the rear Rock Guards and it works great! Try it out for yourself if you don't want to build a makeshift tool like I did in the video. amzn.to/3gFyC6P
thanks for the recommendation about the micro driver set. I was able to easily install the rear rock guards no problem without taking off the rear wheels.
Heyy remember me i was the kid walking with a friend and u gave me ur channel and ur channel is awesome its really dope and coool keep grinding my dude👍
That’s what I thought about the entire time before install but I haven’t heard anything. You can be extra careful and can probably avoid it going through but it goes through fairly easily.
Getting pinned doesn't do anything but puts your comment at the top. I'll pin this comment so you can see for yourself but I usually use the pinned comments to post updates so will remove this pin later.
I picked up this tool to adjust the rear Rock Guards and it works great! Try it out for yourself if you don't want to build a makeshift tool like I did in the video. amzn.to/3gFyC6P
thanks for the recommendation about the micro driver set. I was able to easily install the rear rock guards no problem without taking off the rear wheels.
Glad to hear that!
Awesome detailed video. Thanks for posting!
You're welcome!
Heyy remember me i was the kid walking with a friend and u gave me ur channel and ur channel is awesome its really dope and coool keep grinding my dude👍
Lol talk about clutch. Thanks a lot for the support bro!
Where does the center pin fall to? It looks like they fall into a close area and will make some noise when driving. Thanks
I haven’t taken the entire area apart so can’t verify but theoretically you are correct. However, I’ve never noticed any extra noise.
Thanks for the video. After tightening all 3 screws, I have a gap at the bottom, just a bit less than 1/4 of an inch. How do you get rid of it?
I don’t know the situation so I can’t say for sure. I would assume either tighten the screw more or add a spacer.
So, I can’t get the rivet pin in no matter what I do for fronts. Do you have any tips? The rears were easy and I didn’t need to get the wheels off.
I showed how I did it so can’t speak for any other way.
Ohhhh ok thx for the statement and its alr i just wanted to see what it does but thx
No problem bro 👍🏽
So does the part of the rivet that you pushed through stay rattling within the body panel ?
That’s what I thought about the entire time before install but I haven’t heard anything. You can be extra careful and can probably avoid it going through but it goes through fairly easily.
Is the a slight gap on the back ones on the bottom
What?
@@HaiTran I installed mine and its not flush from the side view is that like yours
I would say mine are flush.
Ofc np keep doing ur thing and never stop doing videos they awesome👍also can i get pinned? I never have been pinned before and idk what it does
Getting pinned doesn't do anything but puts your comment at the top. I'll pin this comment so you can see for yourself but I usually use the pinned comments to post updates so will remove this pin later.