I've Changed the Magnet of RX135 in RXG and improved my bike performance and solved the knocking issue as well For this solution and your hard work on the channel and deep knowledge providing through this medium is excellent 💯💯💯 Thankyou so... Much for 2 stroke enthusiast and guide 👏👏👏👏👏
Happy to hear that.Actually there are very few who learn frm other experience and try what is been suggested on technical basis. I appreciate your move. Thanks for writing ,this will help many others 🍻
I have bought a Swiss coil plate for my RXG. It's charging coil and pickup coil readings are 265 ohms and 29 ohms, respectively. Bike does not start with this coil though starts with old coil. What is the problem? Please inform me.
Problem with my rx 135 :- At any gear position, when I go over a certain speed (say 10 - and high) and close the throttle, she behaves very weird. I mean the deceleration is not smooth at all. It gives heavy jerks as if someone is pulling and then pushing the bike while the throttle is closed. So to get rid of this, I pull the clutch and then it gives a momentory relief. And this continues untill she comes down to 20, plzz suggest solution,
As per ur vedio i did that chenges ie replaced magnet of RXG to 135 but when i closed throttle completely while running the bike jerking cames( jhatke marti hai) and when pull throttle that goes.... And also humming noice in ideal, even replaced clutch bell with new one please provide the solution
TQ Sir karliye difference Aaya very good idea Lekin Ek request hi apse lite proper voltage available Nahin Hai kya karne se light fuse Nahin hoga aur accurate rahega
Very thoroughly explained brother. Thanks for clearing the doubt I have 1996 first lot rxg in stock condition. I have not opened my engine since last 24 years but have the problem of jerking. After watching your video I am gonna replace magnet coil and CDI kit. God bless you brother. Can you share your mobile number
Of late i am loving ur Rx Videos ..very informative & to the point...My Rx 100 magnet plate is company fitted..now its weak..what can i do ..pls suggest..Thanks in advance
Thanks for loving effort. . Regarding the magnets ,there no option other than replacing it. We hardly have people who charge the magnets, if you're able to find one that will be .
@@MotoTravelRide tnx for the reply ..which coil plate should I go for as OE is near to impossible .. Can I change it to some other Indian Bikes coil plate?
No swapping possible with modern date motorcycle . Usually nothing happens to the coilplate magnet unless it is un-necessarily tampered . May I know the reason why you're looking to change coilplate?
@@MotoTravelRide my mechanic is saying the current to spark plug is weak..battery,plug,wiring, cdi,ignition coil,engine condition are all okay,no starting & idling problem
When everything is okay then hows he saying spark is weak 🤔?? CHANGE mechanic itself.😉 If there isn't any problm, then it means everything is perfect. Don't worry 👍
Sir mere pass yamahaRXG hai mai apni RXG ko Yamaha ko Rx135/ 5 speed me canward karana chahata hu or iska pura part kaha milega or kitne paise lagege .....???
CDI, RR UNIT, COIL SET, MAGNETO, WIRING(to match the connectors) ,bulbs. Rewinding the coil is also an option but only if done by sm nicest electrician.. Btw of which year is your rx100??
Hi bro i have RXG I am not facing problem in low speed and bike starting But my bike is missing on high speed when i take it in high speed it drop power and if i take it slow down it will run normally Please give me solution on this 😓
Hello sir I have RX 135 4 SPEED 2001 MODEL there is Problem in My RX 135 is At any gear position, when I go over a certain speed (say 10 - and high) and close the throttle, she behaves very weird. I mean the deceleration is not smooth at all. It gives heavy jerks as if someone is pulling and then pushing the bike while the throttle is closed. So to get rid of this, I pull the clutch and then it gives a momentory relief. Give some solution
Bro, To reduce the vibrations heavy plate has been added to the magneto, otherwise, both magnet spec are same. For knocking please check the ignition timing, retard timing may give knocking, please check the piston you might see damages bkos of knocking
Hi, I m having Yamaha RXG in which I have observed one thing. When I start Bike thn from Magneto side I get its rotation sound but when I press Clutch thn this sound goes off and only engine sound comes. How do I remove this Magnet Sound without pressing Clutch ?
Hi... first of all check magnet for any physical damage or loose magneto or stator. and at same time while the magnet side cover is removed check the pulley mechanism of clutch on the magnet cover . I suppose it should be the worn out clutch pulley making sound as magnet has got nothing to do with the clutch in no load condition.
sir , I have a Yamaha RXG bike of 1995 model . I use rx100 aftermarket silencer with rx100 muffler . Everything is ok of engine . My problem is that i don't find clear exhaust note . what is the problem ? No leakage in silencer . Can you make a video explaining all the things related to RX bike sound ?
Sure...but rxg or rx135 can never give beat like rx100..and in your case sir ,there is aftermarket silencer...so it's a big impossible thing. My advice- get a 2nd hand original rx100 silencer,You'll get clear sound.
Well correct me if I am wrong but rxg never existed in 1993... April 1 1996 was a deadline for new pollution norms so last rx 100 was sold till march 1996 which followed by its succesor rxG where G stands for Green / Environment. So RxG came In the year 1996 .
Thank you brother... that wasn't the motive of this video still For your query -. Magnet cdi clutch bell assembly primary gear rpm gear Needs to be changed
I have rx 135 4 speed and when i wash it its creating problem in starting because of just ignition coils washed both side of connections 1- spark plug side wire 2nd is ignition coil’s second connection which is connected to main wire cable. What is solution? Please help me I’m exhausted with this problem 🥵🥵 Thanks for making all informative videos!!!
First of all ,Thank you for understanding the work. Use rubber sparkplug( available in hero honda cbz, extreme, karizma)cap to avoid water inside the sparkplug side. 2nd at the ignition coil side terminal- use some PVC sealant to avoid water seeping inside . Better to cover the sparkplug end with plastic when you're going for a pressure wash.
Take a test ride of the bike which you're buying.. Best way ride it slowly (around 30-40) on top gear. Agar knocking nahi hogi thn you'll be able to go smoothly jaise baki sabhi rx chalti hai.
I've Changed the Magnet of RX135 in RXG and improved my bike performance and solved the knocking issue as well
For this solution and your hard work on the channel and deep knowledge providing through this medium is excellent 💯💯💯
Thankyou so... Much for 2 stroke enthusiast and guide 👏👏👏👏👏
Happy to hear that.Actually there are very few who learn frm other experience and try what is been suggested on technical basis. I appreciate your move.
Thanks for writing ,this will help many others 🍻
How much will it cost
Hello sir,, i have rxg, what can I do, to resolve knocking problem
You can follow and msg me on Instagram with your queries -
instagram.com/abhi_rxd?r=nametag
I have install rx 135 4 speed magnet fly wheels. Now no problem. Very helpful video
Very happy to hear that.. enjoy the ride .
No bro it's not use.....
Again the same problem will be repeat.
Plz Do a video on Different Between rx 100 & rx 135 magnet coil plate
Ha bhai rx100 or 135 me difference batao. Or 6v to 12v ke bare me bhi
Bhai do a video on 135 4 speed and 5 speed clutch assemble
Thank u soo much sir..i have the same issue with my rxg..now i got the solution.. 👍👍👍
Varun bhai I want to talk plz send your ph no
Thanx sir .. u are sugesting in very good way and ur suggestion helping me for maintaining my rx135
happy to hear that.
Thank you so much sir for this wonderful video...I have rxg now I can convert into rx 135 thanks a lot
If you don't have any problem ,then there is no point of converting it to 135...
@@MotoTravelRide sir am facing lot off problems in my bike like jerking pickup loss and engine noice even torch .....
And One more thing sir do you have any idea how inbuilt catalytic silencer for nice and harmless sound
Nice video. Thank you. Rizwan from Mumbai
Hai,,, i don't think that there is any benefit of changing the cdi... both are having same same btdcs....
can we use Rx135 magnet and RxG 12v cdi ? is that any issue?.
is primary gear responsible for idling?
does using rx135 magnet in rx100 give the beat?
but chain difference any problem
Sir pls do comparison btn rx 135 & 5s
Very helpful video thanks bro 😍
Happy to help
Brilliantly summed..
RX 135 kha magneto Rx 100 me laga sakta hein kya?
I have bought a Swiss coil plate for my RXG. It's charging coil and pickup coil readings are 265 ohms and 29 ohms, respectively.
Bike does not start with this coil though starts with old coil.
What is the problem? Please inform me.
im having same problem, bike almost start. but never actually start. have you solve it?
@@Moipuia23 Problem solved. The pickup coil was of RX100. I,e 20 ohms. Pickup coil for RXG should be more than 80 ohms.
@@akhtarhusain836 i have just check the swiss and the old one with multimeter, and you are 💯 Correct. Thankyou very much Boss
👍👏@@Moipuia23
Problem with my rx 135 :- At any gear position, when I go over a certain speed (say 10 - and high) and close the throttle, she behaves very weird. I mean the deceleration is not smooth at all.
It gives heavy jerks as if someone is pulling and then pushing the bike while the throttle is closed. So to get rid of this, I pull the clutch and then it gives a momentory relief. And this continues untill she comes down to 20, plzz suggest solution,
Hey, pls msg me on Instagram. Need some more details of the prblm
Even head light is different size, my headlight back cover has more depth compared to rx 100 back cover
As per ur vedio i did that chenges ie replaced magnet of RXG to 135 but when i closed throttle completely while running the bike jerking cames( jhatke marti hai) and when pull throttle that goes.... And also humming noice in ideal, even replaced clutch bell with new one please provide the solution
Thank you for providing this information🙂
Which is RXG OR RX135 4speed or 5 speed
TQ Sir karliye difference Aaya very good idea Lekin
Ek request hi apse lite proper voltage available Nahin Hai kya karne se light fuse Nahin hoga aur accurate rahega
Bhar se extra LED fit .best option
Very much thankful
RX 100 me RX135 5 speed ka magnet coil lagwane se pickup or light me improvement hoga ya koi problem aayegi ???
Tell about engine noise of rx135
Thank you for your help sir I love your videos
Thank you so much brother💐.I am glad that it was helpful
I have problem in rx135 5 speed knocking problem Wht is the solution
Very thoroughly explained brother.
Thanks for clearing the doubt
I have 1996 first lot rxg in stock condition.
I have not opened my engine since last 24 years but have the problem of jerking.
After watching your video I am gonna replace magnet coil and CDI kit.
God bless you brother.
Can you share your mobile number
Do we need to change the CDI unit if we change the flywheel of RXG to RX 135
Yes
RX-135 ka kaunse size ka Magnet Puller le hum market se? Bhaiya pls advise, as i need to change the coils.
Of late i am loving ur Rx Videos ..very informative & to the point...My Rx 100 magnet plate is company fitted..now its weak..what can i do ..pls suggest..Thanks in advance
Thanks for loving effort. .
Regarding the magnets ,there no option other than replacing it.
We hardly have people who charge the magnets, if you're able to find one that will be .
@@MotoTravelRide tnx for the reply ..which coil plate should I go for as OE is near to impossible ..
Can I change it to some other Indian Bikes coil plate?
No swapping possible with modern date motorcycle .
Usually nothing happens to the coilplate magnet unless it is un-necessarily tampered .
May I know the reason why you're looking to change coilplate?
@@MotoTravelRide my mechanic is saying the current to spark plug is weak..battery,plug,wiring,
cdi,ignition coil,engine condition are all okay,no starting & idling problem
When everything is okay then hows he saying spark is weak 🤔??
CHANGE mechanic itself.😉
If there isn't any problm, then it means everything is perfect. Don't worry 👍
Very informative sir 👏
Please tell the magnet poles in it ...north or south pole
Sir i want to buy block kit for rx135 which one i should buy?? Please reply
Pm on instagram
Bhai what should i do for the Rx135 choke. I want to make it like Rx100. Please guide. Thank you for the nice video. Respect. Rizwan from mumbai
So can you suggest me which one is't best Yamaha RX 135 or Yamaha RXG 135
For a normal person rx135 is best ( no flaws in bike)
and for a crazy 2stroke enthusiast and modifier RXG.
Sar RXG motorcycle jo hai vah 90 93 ke bich Nahin 96 98 ke bich Mein launch hui thi
Thankyou sar.
Bro Shogun pe banao na video
Sir kya hum rxg 135cc ke bike ka cylinder ko rx100 100cc ka cylinder ko fit kr sakte hai kya?
Plz sir reply me
Sir kya me rx100 ka flywheel ported rx135 me use kar sakta hu ?
vai mere rx 1,2,3 gear power & top speed 80 ok but 4 gear thene par speed loose & have no power. aste aste power kom ho jahega. solve please
Can you tell exact weight of 135 magneto..??
Bahi rx 135 tiger ka jo oil pump attahia usko kise service kartie hia
Any difference in gear ratio? in gearbox?
Make video on rxz
You're still up?
Okay.
How to increase magnetic power
Get the magnet charged ,if too old .
Sir mere pass yamahaRXG hai mai apni RXG ko Yamaha ko Rx135/ 5 speed me canward karana chahata hu or iska pura part kaha milega or kitne paise lagege .....???
Which magnet power is high rx 135 5speed or 4 speed
Super bro...❤❤❤
Can we use rxg magnet in rx100
Sir rx 100 me kesa magnet hota he??? Meri rx100 me rx 135 magnet laga he. To sir plz help mi.
100 me bina plate wala magnet hota hai.. rx135 ka laga hai to bhi koi dikkat nahi hai . don't worrt
Bhai how to convert Yamaha rxg into rx 135
1993 mein RXG was launched? No RXG was launched in 1996 and discontinued at the end of 1997.
Thankyou for the information
Yes bro 😀
RXG is in 1996 and 1997
Rxg launched in 1996
there was an rxg 135 on year 1998model and I owned it
@@bhaktu2stroker626 is rx135 yesi was launched in 1997
Sir ji rx135me rx100ki strating coil dal sakti hai kaya🙏
Very nicely explained 👍
Thankyou
5speed magnet charging solution please Bataye
Good work bhai always
Thank you so much 😀
Sir ji yamha rx 135 five speed and four speed gear and gear changer ke
okay.
Rx 135 chetch bell need rx 135 cdi , am I right ?
Sir kya aap mujhe bata sakte hain RXG 135 Ka Chain sprocket aur RX 135 Ka Chain sprocket Mein Koi difference hai
Bahot difference hai.
Sir how to convert rx100 6volt to 12volt ?
CDI, RR UNIT, COIL SET, MAGNETO, WIRING(to match the connectors) ,bulbs.
Rewinding the coil is also an option but only if done by sm nicest electrician..
Btw of which year is your rx100??
Hi bro i have RXG
I am not facing problem in low speed and bike starting
But my bike is missing on high speed when i take it in high speed it drop power and if i take it slow down it will run normally
Please give me solution on this 😓
Hi !!!
More details would be needed, dm on Instagram ..
Thanks
बहुत खूब
Rx 134 tiger or g
Which is good
Both are good.. but not comparable
It's very helpful..
Thank you dude 💐
Hello sir I have RX 135 4 SPEED 2001 MODEL there is Problem in My RX 135 is
At any gear position, when I go over a certain speed (say 10 - and high) and close the throttle, she behaves very weird. I mean the deceleration is not smooth at all.
It gives heavy jerks as if someone is pulling and then pushing the bike while the throttle is closed. So to get rid of this, I pull the clutch and then it gives a momentory relief. Give some solution
Same problem my bike any solution
Bro I have low rpm jerking issues in rx 135
Good job bro
Bhai mera rxg me same rx135 wala magnet hai
Sir, in RX100 the 4-hole magnet and 2-hole SRF type magnet have using the same CDI?
You can use same CDI
Bro, To reduce the vibrations heavy plate has been added to the magneto, otherwise, both magnet spec are same. For knocking please check the ignition timing, retard timing may give knocking, please check the piston you might see damages bkos of knocking
Bro,my rxg was jerking what should I do for it.what should i want to change
Pls Check the videos,I have mentioned every details
If we install Rx 135 ka flywheel in Rx 100. Then what will happen? Good or bad?
Not good idea. Heavier
Sir apke pass mil Jayega ji 12 volt megnat coil
Hi, I m having Yamaha RXG in which I have observed one thing. When I start Bike thn from Magneto side I get its rotation sound but when I press Clutch thn this sound goes off and only engine sound comes. How do I remove this Magnet Sound without pressing Clutch ?
Hi... first of all check magnet for any physical damage or loose magneto or stator. and at same time while the magnet side cover is removed check the pulley mechanism of clutch on the magnet cover .
I suppose it should be the worn out clutch pulley making sound as magnet has got nothing to do with the clutch in no load condition.
sir , I have a Yamaha RXG bike of 1995 model . I use rx100 aftermarket silencer with rx100 muffler . Everything is ok of engine . My problem is that i don't find clear exhaust note . what is the problem ? No leakage in silencer . Can you make a video explaining all the things related to RX bike sound ?
Sure...but rxg or rx135 can never give beat like rx100..and in your case sir ,there is aftermarket silencer...so it's a big impossible thing.
My advice- get a 2nd hand original rx100 silencer,You'll get clear sound.
Later they have same as 135, I have RXG since 1997
Bro cost kitna rahega i dont want to get fooled by greedy mechanics. Please let me know.
Cdi ket details rx135 plz tell
...sir ji !! Gotze brand ki cylinder kit ki performance kaisi hai as compared to original kit !!?? ( for rx135, 5 speed).
Original is better than goatez
But can we swap. Rxg flywheel with rx135 flywheel
Yes you can
Hello sir Rx 135 4 speed and 135 5 speed magnet is same ?
Different in weight and magnet type
Well correct me if I am wrong but rxg never existed in 1993... April 1 1996 was a deadline for new pollution norms so last rx 100 was sold till march 1996 which followed by its succesor rxG where G stands for Green / Environment. So RxG came In the year 1996 .
Thx
Very helpful sir. Can u list out how many sparts change then rxg convert to rx135 .this is not clear
Thank you brother... that wasn't the motive of this video still
For your query -. Magnet
cdi
clutch bell assembly
primary gear
rpm gear
Needs to be changed
Check out this video for the clutch and rpm gear part -
ruclips.net/video/hQGXBDZ1288/видео.html
Big fan sir
Thank you sir
My issue not resolved even after replacing the magnet 😔😔
Plz suggest
Sad to hear that.. whats the block series you're running on??
@@MotoTravelRide 4TL
Sir Rx 135 5 speed ka magnet rxg me instal ho jayga please tell me
Dono me difference hai weight aur magnet ka.lekin fitting ke hisab se same hai, lag jaega..
@@MotoTravelRide thanku sir
Very nice dear bro knowledgeable.... I have also rx 100.... I'll already subscribe your channel.... For future video...
Thank your brother... Your appereciations and support means a lot 💐
Yes
Mere pass rx hai 1996 make, kaise pata karu rx135 hai ya rxg hai?
Owner book me likha hota hai..
@@MotoTravelRide usme hand written hai RXG-135
Bro that's not RX G magnet
That magnet rx100
Bahi Yamaha rx115 ke baare me bhi batao
Sir new charjar bhi dal diya
I have rx 135 4 speed and when i wash it its creating problem in starting because of just ignition coils washed both side of connections 1- spark plug side wire 2nd is ignition coil’s second connection which is connected to main wire cable.
What is solution? Please help me I’m exhausted with this problem 🥵🥵
Thanks for making all informative videos!!!
First of all ,Thank you for understanding the work.
Use rubber sparkplug( available in hero honda cbz, extreme, karizma)cap to avoid water inside the sparkplug side.
2nd at the ignition coil side terminal- use some PVC sealant to avoid water seeping inside .
Better to cover the sparkplug end with plastic when you're going for a pressure wash.
Who the best rxg Vs rx100
You're the best... 👌But still among these two RXG .
Sir i am buying 1997 ka model rxg ousme bhi ye problem hai ? Plz let me know asap thank u
Take a test ride of the bike which you're buying..
Best way ride it slowly (around 30-40) on top gear. Agar knocking nahi hogi thn you'll be able to go smoothly jaise baki sabhi rx chalti hai.
Hi sir, can i use rx100 wire kit in rx135 and can I use rxg 135 bore kit in rx 135 because in my city rx135 parts not available
You can bro which city ur from