Fantastic video!! So clearly explained and a novice will be able to learn a lot from this video. Great work and appreciate the patience you took in walking us through the nuances!!! Keep up the great work buddy
Aapne itni information de di ke ab to ghar par apne se hi carbaurator clean acche se perfect parts ke saath easy kar sakte hai ji , bahot badiya video hai ji aap free me knowledge share karte ho, oupar wala aapko khush rakhe 👍👌
Wo knowledge hi kis kaam ka jo sab ke kaam na aye 😀 ...ji, bahot accha laga jan kr ki aab ghar pr hi krlengy carburetor ka kaam..videos ka maksad pura hora hai 🔧
Bike starts normally but bike jerks when riding as if it is about to stop. Moreover engine suddenly stops after riding for some time. Carburetor and spark plug has been cleaned but problem still persists. Kindly suggest a remedy.
Sir my carburetor is not working properly so my mechanic arranged one carb but it has a larger venturi dia and the carburetor slide is also big as compare to my rx100 but the jet size is same is there any problem in fitting. If u say ill send pics to u through mail
Yes we can, as we all know nothing is impossible . But don't do it , as handle bar choke system is pretty much prone to faults - stucking/ half choke riding. The best is the bottom ones ,thay we have in rx100carb. Keep it intact
Check your float height and correct it Check if float pin is stuck If it's stuck, clean with petrol and immerse in oil for 24 hours and then now see if it has the spring action. If it's still stuck, then change the pin Replace your float gasket too.
As I'm not sure what kind of porting has been done on your bike.. you can get exact details of carb to be used from the place where you got it ported.. On a stock bike 135 carb works good with slower pilot jet, one one use.👍
cant find rx100 mikuni carb anywhere in mikuni website too only closest available are vm24 main jet 210 slow jet 40 and vm26 main jet 190 and slow jet is 22.5 , which one you recomment fit to rx100 without any change in cylinder.
If it is stock(normal ports) cylinder of rx100, vm 22 would be enough.. with a 140 main and 17.5 or 22.5 pilot. ** I will say Go with the stock (vm20) carb with 140/160main.. or fit a stock rx135 carb. *190 main jet is too much over for a 100kit
Bro can we convert rx 100 engine completely to RXZ 5 speed engine?. If yes what are all components needed apat from carburettor. Please help us/me understand. Thanks bro!
@@MotoTravelRide carburetor to open hi nahi kia to adjustment ki jaroorat kyu, sahi chalrahi thi achanak ye ho giya. Koi dusra solution nahi hai kya sir? Kyun k carburetor kholwawun to gasket nahi milsakta iss size ka. Please answer me sir.
Thanks! I tried installing the RX100's pull-type choke but it didn't fit on my G's Carb. Turns out that the G also came with a pull type choke, but only for a short time Right now I'm using the 135's cable choke, but I want that G's choke Pretty darn rare and hard to find.
I live in delhi i own rx 135 speed 4 my carbuetor is finished i need new and original one can u help or atleast provide m any link's i will be full of u
Hi Rahul , it's almost impossible to find a brand new carb for 4 speed. Used , good condition carb it the closest option.. Even I'm looking for a new 4s carb,long time haven't come across.
@@MotoTravelRide I am looking for RX 135 (4 speed) carburetor. From Where do I get the same? Showroom/dealers do not entertain escorts Yamaha spares anymore
From my Rxg's carb there is an airsound exhaling or inhaling sound from the 2t inlet nozzle and it also makes variations in my AF and when i blocked it with putting a ball inside the tube then the bike is not getting it's slow speed. And bike always seems like starving to get fuel whenever i close the throttle. Please help me to find what is the main problem
Manifold, resonator pipe or box ( power box) ,cracked air filter box , check all these for damage. Also Seal that 2t inlet properly .. ball doesn't work properly
Bro i just noticed in my rx100 , there is a rx135 carburetor , should I change it or do some adjustments. Also bro my rx100 is turning off uphill , what's the problem
Sir I am having fluttering issue on my Yamaha Rx 135 done all the things jets are clean carb clean exactly same 165 .17.5 petrol t changed air filter change but still fluttering is there my mechanic is not able to find the problem and also bike is one kick start but in 3rd or any gear when rev high it's starts to flutter at 60 and cdi is genuine along with the ignition coil .Top speed is 85 kmph max after that fluttering starts and refuses to go above 3 rd needle pin carb is been set by different mechanics to find if it's accurate but then also nothing happened. Spark plug is ngk the only thing old is coil plate .my brother has same bike goes 80 in 3rd 110 at 4th gear
Hi shashank!!!.thank you for the detailed write-up. Sound like the upper circuit is faulty. Still, There are few more things needs to be checked.. B4 that I would need few more inputs from your side ,if you're on Instagram pls dm me on - abhi_rxd
Brother please make one video on how to get stock exhaust note from RX 100. How to inspect the core of the silencer? Also my rx100 when roughly ridden over bad roads, there is thud or instability felt from handlebar from front suspension....i have checked for any play in the cone set but there is no any...for your information my Rx 100 has been restored recently. (4 months back).
Hi vaibahav!!! Dfntly will try to make a video on that as well in coming time. Regarding your Rx, check few more things with diffrent angle - 👉check the wheel bearings 👉Handle T for mis-alignment /or bend in centre shaft. 👉Con-set pitting ** Also the rear swingarm bush( even though the problem is felt on front ,sometimes it is generated at rear.)
@@MotoTravelRide Many parts were replaced during the restoration process like bearings, cylinder kit, oil seals, tyres, cone sets, swingarm bushes, front suspension rods, rear shock absorbers, T handle seems to be alright since bike remains stable when hands are off the handle on smooth road. There is no play in the wheel bearings as well since they are new. Can this be related to front suspension springs? Or something from front suspension from inside that feels like banging there? Something loose?
Thanks for the detail information,, correct, it is something inside causing the problem. 3 probable faults inside Missing spring seat shortened spacer the pump/ cylinder (misfitted or faulty) . Btw ,Hows the shockabsorber rebound ???
@@MotoTravelRide shock absorber rebound is kind of okay not very eager to raise upwards or very agile and free like my other new bikes. I even tried lift front portion of the bike with handlebar and bang on the road while bike is stationary and on its tyres...but same situation cannot be replicated like this. This problem is taking away surefootedness of my bike on bad roads with some speeds. Your advice please. And approach to resolve the issue.
@@vaibhavpatil86 There's something erratic and a bad sign that either something is loose/ ill fitted which sometimes get back in right place and sometimes in wrong. If I would have been in your place, would have gone for a complete diagnosis of the inner components inside.Espcly those 3 mentioned in earlier comment.. + making sure that the mechanic is a shockabsorber expert.
Sir Excellent 👌 I like the way u explained A common rx owner can understand the points Sir I have one doubt In my rx100 mikuni carburator O' ring is missing In between main jet and sprinkler jet If the case there is any problem in riding? Or missing? Anything else? Please reply . I m waiting for ur reply
Thanx bro also make a video on Rx 135 4 speed carb n rx135 5speed carb so dat v get knowledge on dat also.i hav a 135 4 speed bike n hav fully converted it into 5speed so each n evry part I had purchased from a guy so now I ha 2 carbs so want to know d difference thanx
Very detailed and informative video, very clearly you tell the differences between the two carburettors but you forget to tell the difference between top of carb where throttle cable attach, the rx100's is threaded one and rx135's is non threaded. Please make sure to make a video on that or in hindi version of this video please try to put that also. Thanks. Cheers.
@@MotoTravelRide aur shayad mere khyal se needle bhi alag rhta hai dono carburetor me. Rx100 me needle 4M2 rahta hai or Rx135 me 4J26 hoti hai. Correct me if i am wrong. Thanks
Correct hai.. usko hindi wale me sudhar diya gya hai already 🙂 aur ek short update bhi aajaega iske liye. .. Bas aise hi support krtey rahe. ,Dhanyawad.
Sir is there any advantage or disadvantage in using a 5 speed carb on a 4 speed G/135's 4TL00 engine ?
Thank you
The thing i love about your videos is they are very much into detailed and at the same time easily understandable. Keep it up brother
Thank you brother, I'm happy to know that it was informative..
Fantastic video!! So clearly explained and a novice will be able to learn a lot from this video. Great work and appreciate the patience you took in walking us through the nuances!!! Keep up the great work buddy
Glad it was helpful!
Aapne itni information de di ke ab to ghar par apne se hi carbaurator clean acche se perfect parts ke saath easy kar sakte hai ji , bahot badiya video hai ji aap free me knowledge share karte ho, oupar wala aapko khush rakhe 👍👌
Wo knowledge hi kis kaam ka jo sab ke kaam na aye 😀 ...ji, bahot accha laga jan kr ki aab ghar pr hi krlengy carburetor ka kaam..videos ka maksad pura hora hai 🔧
Duaaon ke liye bahot bahot shukriya, 🙏
Nicely explained brother❣️🤘
thank you brother.. :)
can i use rx100 idle jet to rx135??? any problem bro
Wonderful information sir .......I m always waiting for your new videos about rx.... go on sir
Thank you bro,happy to hear that.
More videos on the way..
Bro what about Mikcarb carbarator of 13L 17
Bro i own a rx 100 which jets to use to get more top end power ?
Use a main jet of 135 number . 👍
@@MotoTravelRide
Ok thanks brother.
What about pick up coil? Can i use pulsar's in rx 100 ? Does that modd make any increase
No..but u can use the starting coil of pulsar, but those won't make any major differences..
@@MotoTravelRide
Allright
@@MotoTravelRide you mean 135 number or 165 number of rx 135.please make it clear...
Wonderful information with detail explanation sir... and very useful video...
Thank you sir, glad to know tht it was helpful.
Can replace rx 100 sprinkler jet with rx 135 sprinkler jet and what will be the difference if i do that ??
Haven't tried it sir,. Cannot comment about it.
If you have it, pls give it a try and update for us as well to learn. 🙂
@@MotoTravelRide ok sir i will let u know if it works 😊😊
This is really helpful bro, thank you verymuch❤️
Plese make avideo RxG and rx135 total difrence in Hindi
which corporator give mileage and pickup plz answer me
Can i use rxz 6 speed 26mm carburetor in rxs115?
I don't know about it..
I've just put a 95 jet in my carburettor is it ok bro?
Can we alter our 135- 4speed cable type to pull type...?
If yes,does it work effectively?
Rxg's pull type choke sets . Effective 👍
@@MotoTravelRide thank you sir.....love from Hyderabad...
I bought a second hand rx100 but later found out that it is fitted with rx135 carburetor. Is it a problem ?
No it isn't , unless the bike is giving you trouble..
Bike starts normally but bike jerks when riding as if it is about to stop. Moreover engine suddenly stops after riding for some time.
Carburetor and spark plug has been cleaned but problem still persists.
Kindly suggest a remedy.
Riding at what speed it jerks??. It would be great if you can write it down on Instagram.. we can discuss details.
Sir my carburetor is not working properly so my mechanic arranged one carb but it has a larger venturi dia and the carburetor slide is also big as compare to my rx100 but the jet size is same is there any problem in fitting. If u say ill send pics to u through mail
send on Instagram if possible or else on mail
Sir i mailed u some pics
I send u insta follow request u dint accept yet so i mailed u some pics
@@seshdevpatalasingh524 oky.. moto_travelxd is open profile.
Have got your pic and request both.
Very Informative .....Thanks for sharing !!!!!
Hello! Is it possible to fix rx100 pull type choke on rx135 carb? Mine has a wire one operated on handle.
Yes ,only the rxg carbs pull type choke work.
**don't try Rx100 choke on 135 carb, it's won't work
@@MotoTravelRide what's the serial of rxg? Mine is a 4tl00 cylinder with 4tl01 carb. I don't like the cable operated choke of 135. 🤮
Sir....can we make rx100 choke lever on handlebar
Yes we can, as we all know nothing is impossible . But don't do it , as handle bar choke system is pretty much prone to faults - stucking/ half choke riding.
The best is the bottom ones ,thay we have in rx100carb. Keep it intact
What is the exact type size and model number of mikuni carburetor for rxz135 6 speed? Thank you brother for your great advice.
Patrol kam hoga kiya dhkiya ga sirr
bro can i use rx135 or rxz carburetor in my rx100? and how can i find out the original one.
I own a rx135 99' model....there is petrol leak in carb!!
What will be the problem?
Problem Depends on , from where and why it is leaking.. leaking itself is a problem
Check your float height and correct it
Check if float pin is stuck
If it's stuck, clean with petrol and immerse in oil for 24 hours and then now see if it has the spring action. If it's still stuck, then change the pin
Replace your float gasket too.
Bro can we fit rxz 4s carburetor in rx100 is there any problem. And I have ported my 100. please reply
As I'm not sure what kind of porting has been done on your bike.. you can get exact details of carb to be used from the place where you got it ported..
On a stock bike 135 carb works good with slower pilot jet, one one use.👍
Hello sir. Can I use the carburettor repair full kit available online to repair my rx135 carburettor?? Plz answer sir
Yes you can use.. but try getting original jets of the mikuni. . Remaining thing use from the repair kit. The jets in the Natco repair kit is not good
@@MotoTravelRide thank you sir. But where can i find the original jets?? Any online links?
That's completely on your risk. Figure out the genuine ones with original product and then only buy..
In my rx 100 carb i have 105 jet size is there is any problem
No problm.. better mileage
@@MotoTravelRide 🙏
Well explained bro just wanted to know what will be written on carburettor of rxz 5speed
Very nice and informative video brother. Thank you for the video. Respect. Rizwan from Mumbai
Is the float bowl, Same for both Rx100 and Rx135.
Yeas
cant find rx100 mikuni carb anywhere in mikuni website too only closest available are vm24 main jet 210 slow jet 40 and vm26 main jet 190 and slow jet is 22.5 , which one you recomment fit to rx100 without any change in cylinder.
If it is stock(normal ports) cylinder of rx100, vm 22 would be enough.. with a 140 main and 17.5 or 22.5 pilot.
** I will say Go with the stock (vm20) carb with 140/160main.. or fit a stock rx135 carb.
*190 main jet is too much over for a 100kit
Where can I get a original one for rx 100?
Sir can i use japan carborator for rx135 4 speed.
yes.
Bro..wt about out let nut , which is at the lowest point of carburetor..
What's in that bro??
Bro can we convert rx 100 engine completely to RXZ 5 speed engine?. If yes what are all components needed apat from carburettor.
Please help us/me understand. Thanks bro!
Rx100- 135 ( conversion)
Cylinder, CDI, mag/ coil, gearbox, wiring harness, chainsproket set.
Is it possible to use rx100 idle screw in rxg carburetor
Yes,you can. all idle screws are same... Air screws diffrent.
Where can I find best original carb for rx135 ?
Check online ..or contact this guy,he can arrange- 6206683436(Bhanu)
Bhai main jet ki oring kaha milegi bhai bataiye
Bro my rx 5speed is running with an rx100 carburetor. so there any harm or benefit to it
harm..
@@MotoTravelRide Can you tell me in detail?
Sir please tell me what is position of niddle clip in rx 100 carb...2nd or 3 rd..?
3rd
@@MotoTravelRide thanks sir.....for answering me.
Mera rx135 4 speed wala bike hai. Iski curborater ke pichhe jo pipe laga hua hai usse petrol bahar girta hai. Iska solution kya hai Sir please bataye.
Overflow hai wo.. float adjust krne hota hai usko band krne ke liy
@@MotoTravelRide carburetor to open hi nahi kia to adjustment ki jaroorat kyu, sahi chalrahi thi achanak ye ho giya. Koi dusra solution nahi hai kya sir? Kyun k carburetor kholwawun to gasket nahi milsakta iss size ka. Please answer me sir.
Excellent narration,Thank you
Thanks!
I tried installing the RX100's pull-type choke but it didn't fit on my G's Carb.
Turns out that the G also came with a pull type choke, but only for a short time
Right now I'm using the 135's cable choke, but I want that G's choke
Pretty darn rare and hard to find.
Yeah. Pull type G choke is very rare thing.. .but there is no harm using the cable 135 one.. that functions well.and even handle mount make it handy
Hello! Can I use rx135 carburetor on 100 for better performance? Any issues if so?
Hi!!!
No, it's not of much benefit using a stock rx135 carb on a rx100..
@@MotoTravelRide what if I am running an expansion chamber, no porting, stock cdi setup?
I am using 100 carb on my 135 did it will affect perfomance and mileage
Yes..you'll not get proper performance.
Mileage will approximately be same +-5kmpl
I have tried it performance drops throttle decreases and average drops as well.
What happends when we set 135 carb on 100
Less mileage more picup less top speed
Super explaination 👍👍
Thank sir..
Rx135G 4speed carborutor information plese
I live in delhi i own rx 135 speed 4 my carbuetor is finished i need new and original one can u help or atleast provide m any link's i will be full of u
Hi Rahul , it's almost impossible to find a brand new carb for 4 speed. Used , good condition carb it the closest option..
Even I'm looking for a new 4s carb,long time haven't come across.
Thanks for reply bro and best wishes for your chanell
Is it okay to use RX 100 carburetor in RX 135 bike... Will it affect the pick up & mileage of the bike? Since jets & ventury are different in each one
It'll affect the pickup and speed negatively .
If you can compromise on these two ,you can run.
Mileage will increase slightly.
@@MotoTravelRide I am looking for RX 135 (4 speed) carburetor. From Where do I get the same?
Showroom/dealers do not entertain escorts Yamaha spares anymore
You'll have to look it outside , local sellers-online. . Lemme check with my contacts
Best carbeator for 135 36l00
@@nishanthkps what's 36100?
Price or part number, specification?
Great brother 🎉🎉🎉🎉
Thanks brother..
From my Rxg's carb there is an airsound exhaling or inhaling sound from the 2t inlet nozzle and it also makes variations in my AF and when i blocked it with putting a ball inside the tube then the bike is not getting it's slow speed. And bike always seems like starving to get fuel whenever i close the throttle. Please help me to find what is the main problem
Manifold, resonator pipe or box ( power box) ,cracked air filter box , check all these for damage.
Also Seal that 2t inlet properly .. ball doesn't work properly
Help me to get japan carb rx 100
Available dm on Instagram
Bro i just noticed in my rx100 , there is a rx135 carburetor , should I change it or do some adjustments.
Also bro my rx100 is turning off uphill , what's the problem
Turning off up hill or bogging down( unable to pull boldly))pls clarify it.
135 carb on 100- If its tuned well, it will run good.
It is unable to pull boldly and now from 2 days it also turning off , I don't what to do
what happens when we put 100 carburettor in RX 135
Appreciate bro very nicely described...
Thank you brother, your appreciation means a lot ♥️
What a detailed& Fantastic video.
Sir where i will get Main jet & slow jet of rx 135 4 speed.
Plz help.
Thanks man.
There are many people selling online... you can get it from them
Sir I am having fluttering issue on my Yamaha Rx 135 done all the things jets are clean carb clean exactly same 165 .17.5 petrol t changed air filter change but still fluttering is there my mechanic is not able to find the problem and also bike is one kick start but in 3rd or any gear when rev high it's starts to flutter at 60 and cdi is genuine along with the ignition coil .Top speed is 85 kmph max after that fluttering starts and refuses to go above 3 rd needle pin carb is been set by different mechanics to find if it's accurate but then also nothing happened. Spark plug is ngk the only thing old is coil plate .my brother has same bike goes 80 in 3rd 110 at 4th gear
Hi shashank!!!.thank you for the detailed write-up.
Sound like the upper circuit is faulty.
Still, There are few more things needs to be checked..
B4 that I would need few more inputs from your side ,if you're on Instagram pls dm me on - abhi_rxd
This same thing is happening to my bike i have 135 4speed ,did u find solution what was the problem
@@mayan8340 no sir aapko mila kya
@@shashankdubey4703 not yet
Same here
After 85kmph the bike goes...phurrrrrrrrrrrrrrrrr
Brother you’re great ❤️😘😘😘😘
Rx 135 G carboratur
Pls tell carburator over flow prblm bro 🥺🥺🥺🥺
Thanks for wen depth video
Thanks bro for explaining
my rx100 japan carb. Is clean & My bike is restore but still the average is not good 25kmpl approx what can i do ?
Get it Tuned properly you'll get 40👍
Tuned it 3to 4 time . Replacing jet is helpful ? Or i change my carb ?
If you get a new carb then change it, else replace with original new jets .
what? If we use rx 100 carburator on 135.what would be the effect.
No issues you can ride.. but it will gv poor riding experience
What about starting issue?? Any effect!!!
Nicely explained
Brother please make one video on how to get stock exhaust note from RX 100. How to inspect the core of the silencer? Also my rx100 when roughly ridden over bad roads, there is thud or instability felt from handlebar from front suspension....i have checked for any play in the cone set but there is no any...for your information my Rx 100 has been restored recently. (4 months back).
Hi vaibahav!!!
Dfntly will try to make a video on that as well in coming time.
Regarding your Rx, check few more things with diffrent angle -
👉check the wheel bearings
👉Handle T for mis-alignment /or bend in centre shaft.
👉Con-set pitting **
Also the rear swingarm bush( even though the problem is felt on front ,sometimes it is generated at rear.)
@@MotoTravelRide Many parts were replaced during the restoration process like bearings, cylinder kit, oil seals, tyres, cone sets, swingarm bushes, front suspension rods, rear shock absorbers, T handle seems to be alright since bike remains stable when hands are off the handle on smooth road. There is no play in the wheel bearings as well since they are new. Can this be related to front suspension springs? Or something from front suspension from inside that feels like banging there? Something loose?
Thanks for the detail information,, correct, it is something inside causing the problem. 3 probable faults inside
Missing spring seat
shortened spacer
the pump/ cylinder (misfitted or faulty) .
Btw ,Hows the shockabsorber rebound ???
@@MotoTravelRide shock absorber rebound is kind of okay not very eager to raise upwards or very agile and free like my other new bikes. I even tried lift front portion of the bike with handlebar and bang on the road while bike is stationary and on its tyres...but same situation cannot be replicated like this. This problem is taking away surefootedness of my bike on bad roads with some speeds. Your advice please. And approach to resolve the issue.
@@vaibhavpatil86 There's something erratic and a bad sign that either something is loose/ ill fitted which sometimes get back in right place and sometimes in wrong.
If I would have been in your place, would have gone for a complete diagnosis of the inner components inside.Espcly those 3 mentioned in earlier comment.. + making sure that the mechanic is a shockabsorber expert.
Sir, rx 100 carburettor ka full serviceing Vidio uplode kijiye
On the way... Jaldi hi ajaega.
@@MotoTravelRide thanks sir for ur valuable information
Sir
Excellent 👌
I like the way u explained
A common rx owner can understand the points
Sir I have one doubt
In my rx100 mikuni carburator
O' ring is missing
In between main jet and sprinkler jet
If the case there is any problem in riding?
Or missing? Anything else?
Please reply .
I m waiting for ur reply
Misfiring..
Leakage from thread walls- improper tuning.
Rubber/O-ring is compulsary.
Thankyou for understanding the work.♥️
Thanks for the video
Thanx bro also make a video on Rx 135 4 speed carb n rx135 5speed carb so dat v get knowledge on dat also.i hav a 135 4 speed bike n hav fully converted it into 5speed so each n evry part I had purchased from a guy so now I ha 2 carbs so want to know d difference thanx
As soon as possible
Great
😍
Bro der r 3pipes on d carb one is drain other for 2t oil n wat is d 3 pipe wats is d functioning of dat pipe?
Saftey valve type function
Excellent Bro...
Super
rx 135 carburetor fit to rx 100 speed different
Hundred Mein hoga kiya 135 carvoter hota a lakin patrol bohta khaataa he lakin mast hota Ha bike Rx100
Correct
Very detailed and informative video, very clearly you tell the differences between the two carburettors but you forget to tell the difference between top of carb where throttle cable attach, the rx100's is threaded one and rx135's is non threaded. Please make sure to make a video on that or in hindi version of this video please try to put that also. Thanks. Cheers.
Thank you brother.. definitely is point ko mai hindi wale me add kardunga.
Cheers.
@@MotoTravelRide aur shayad mere khyal se needle bhi alag rhta hai dono carburetor me. Rx100 me needle 4M2 rahta hai or Rx135 me 4J26 hoti hai. Correct me if i am wrong. Thanks
Correct hai.. usko hindi wale me sudhar diya gya hai already 🙂 aur ek short update bhi aajaega iske liye. ..
Bas aise hi support krtey rahe. ,Dhanyawad.
@@MotoTravelRide is there any problem in swaping the needles mine got 4M2 needle in a 4s carb
RX 100 convert to 135 carvoter mast puckupp mast ho ga
Try it.
Rx100 carburetor will set in 135
bro Tamila sonna inum nala irukum bro
Hindi nahi aati kya
Hindi me bhi iska video hai... Comment krne ke pehle thora sa dhund liya kro pehle
Hindi me iska koi bhi video nahi hai dekh liye saare
Ye rha ...
ruclips.net/video/xckmxFaVvNg/видео.html
Ye video 2t oil pump ka nahi hai. Ye toh karborator ka hai