Few thing adding here - *Pls msg your queries and problem in details on instagram (moto_travelxd). * Kuch comment (Mitul Patel) by mistake delete ho gaye hn, pls aap fir se comment kr de..
Very nicely explained. I am one of your subscribers. Your passion for two stroke is much appreciated. You are clearing many unanswered questions for the people like me who have minimum knowledge about these issues. I own 1993 rx 100. Stock condition. I do get this noise from right side of the engine, is that ok to continue with that noise or does it need to addressed as soon as possible? Kindly reply. Best regards Dr Shiva Bharani
Hi Shiva..thank you for your kind words. If you're certain that the noise is from right side, then it has to be clutch. If it is slight and addressed at the earliest it will save few bucks and keep the original thing in bike. Carrying on with that noise might aggravate the problem and costs would be major. Sound is basically primary sign of beginning of the problm. No harm, get it checked one time( not necessarily ASAP)
Sir I’m having RX 135 4s in stock condition ( recently restored). It runs with 18 inch wheels, mikuni oem Japan carburettor, and a 0.50 mm piston. My bike only goes 95km topspeed without pillion. Please help me to gain more topspeed. Waiting for ur reply.
Most probably don't go after top speed cause most people love to see the bike and maintain good firing and good engine health it'll stay close to you longer
Sir after engine is.on and I press the clutch lever fully then the thud thud noise continuously coming but as soon as lever is released then no sound..any idea what might be the issue.. I have RX 135 4 speed
Very nice bro..aap mjy yai bataw bro fazer ka sound problem kyu hoti hai aur theek bhi nhi hatai hai..koyi us kaa sound thk nhi karta hai..koi solution bataw
Brother, currently experiencing a problem, my bike is having the same noise you stated... i have replaced new basket, new inner basket, new steel plates, new cork plates, new pressure plate, still the sound persists. Does riveting the basket too tight so that it cant dampen the sound on the rubber makes sound ?... Or we want a very very little play to arrest that sound ?
@@MotoTravelRide i have gone to a mechanic for clutch noise issue. he showed a minor gap between those gears and he told me that was the reason for that noise and asked me change it
@@balajimuthu6628 if you're able to see that gap.. then it's not a minor gap. It's major. .you have to replace it then. But make sure to check rest of the things that are explained in this video.
Bro i got damage one of the tooth of clutch belt with the screwdriver when i tighten the crank shaft and it make a very loud noise. I just want to know is that true because the mechanic said that the reason of the noise. If it is so can i smoothen the damage tooth with sandpaper?
Some say another reason for the sound is roughness of the gear teeth face of primary and bell gear teeth. Can I polish the teeth face to a mirror finish?
Bro I have one spare clutch bell of rx100 can I change rx100 basket & replace with rx135 basket that fit to same bell ur previous video u said use rx135 for increase more pickup
Hi bro, need some clarification on primary gear and clutch bell. What are all the sound arises if primary gear or clutch bell is worn out and how to identify it and change the parts.
@@MotoTravelRide ok, Thank u bro. Does it produce any sound if teeth of primary gear and teeth of clutch bell is worn out. Because my mechanic said in my bike that teeth of primary gear and clutch bell is worn out so it producing sound, that's why I am again asking this question bro. What he said is true ?
Hi.. one who is physically checking it can say in a better way. It all depends on the wear n tear. Its all explained here , Refer to video nicely and check with your mechanic .
On my 1991 rx100... I observed the rattle sound from the clutch cover... If I depress the clutch lever, the sound disappeared... If I release the lever the sound resumed... Is it the issue with clutch?
bro, my rx gives some kind of whining noise frm the clutch side, if i pull the clutch in, the sound stops, if i release the clutch the sound comes, do you have any idea about this bro? pls kindly help and do reply😁
Hey bro I have a 1995 RX100 and the problem that I am having is that after riding my bike for like 30 mins my engine misses and shut down as if fuel has finished. After waiting for 10-15 mins the bike starts again. Can you guess and tell me what the problem is? Some people have told me that I need to change my entire piston block but I don't think that's the case. Is it a problem of the Reed Valve? Also it smells like kachha fuel sometimes. Would be really great if you can help 🙂
Hi.. it can be anything only in the electronics.. Ht coil( under tank) most primary suspect. Or the Cdi or at last the pulse coil under magnet . Dm on Instagram ,can elaborate you to rectify it.
Where to get original clutch housing and boss for RXG? IF buying after market product, which one to buy and where is it available? Please give me an idea of the costs as well.
clutch housing are no more in production. go for after market, the only option. ( pick locally by ordering at shop). might cost 200 around for centre, 300 boss and 400-500 basket..
Bro how to stop rx135 clutch jerking problem if we riding 50 km speed if we release throttle the engine got jerking what is the solution for that problem bro
Hello Brother, recently i have got serviced my bike and changed the new clutch plates and steel plates as well original from yamaha. also set the clutch setting as you told in previous video. but my bike is just making sound but not running properly... there is not that good pickup that rx have in actual. i am having OE 5speed block piston 100 number kit installed in my 4speed engine. can you please tell me what could be the problem and how can i solve it also please tell me how can i properly tune it. looking forward for your reply... Thank you.
Hi ankit... First thing have a go through this video and find out if you had any of these issues with with the clutch components.. If non was there ,then there there is a chance that the bell tooth or the primary tooth either of them is not matching or worn out becoj of which the noise comes.
@@MotoTravelRide actually making sound in the sense bike just aawaj kar rahi hai but bhaag nahi rahi hai... mean there is not pickup and all even after changing the new clutch plates... also i have inspect all the things already that you showed in the video brother there is no such issue in the bike. thank you.
My yamaha rx100 makes unpleasant sound while in consistent speed..... It sound like "fad fad fad fad" have you observed or experienced such kind of issue... Please do reply how can I fix this issue....
Sir I’m having RX 135 4s in stock condition ( recently restored). It runs with 18 inch wheels, mikuni oem Japan carburettor, and a 0.50 mm piston. My bike only goes 95km topspeed without pillion. Please help me to gain more topspeed. Waiting for ur reply.
Okay.theb It's actually showing you faster speed, but going slow around 85-90kmph only Message me on the instagram... moto_travelxd , need more details.
Bro how to stop rx135 clutch jerking problem if we riding 50 km speed if we release throttle the engine got jerking what is the solution for that problem bro
Few thing adding here -
*Pls msg your queries and problem in details on instagram (moto_travelxd).
* Kuch comment (Mitul Patel) by mistake delete ho gaye hn, pls aap fir se comment kr de..
Post your Instagram account brother. That will be helpful to us
@@balajimuthu6628 moto_travelxd
Thanks bro i went to many Mechanics but never got ds problem solved i changed d rubber bushes still der is sound so now i understood 👍
Which parts rubber bushes ??
Which part rubber bush Tyson bro pls
Next to next level knowledge you have sir 👍 💯 👌
Kya baat hai.... Three cheers!!! I am always thinking about such fine prints which make minute differences... please keep up the good work
Thank you..cheers 🍻
Namaste sirji very nice detailed description and information on the RX100 CLUTCH ASSEMBLY SOUND I HAVE A YAMAHA RX100 JAPAN MODEL 1987
Thanks a lottt brooo.....I cherish n am crazy abt my 1989, single hand, in Immaculate condition RX-100
Keep on making videos on Rx bro..... I have to learn a lot 😃😃❣️❣️
You are the best brother 🎉🎉🎉🎉thanks a lot
I simply enjoy your videos..Its informative and easy to understand.
Can u pls do videos on magnet assy differences between 100 & 135. 2 hole, 4 hole diferences coil plate differences
👍👍,,,, nice nice knowledge for clutch hub, rx 100
Clutch bell repair full process please very much needed 🙏🏻 How to repair it without scratching those repeat bolts
Very nicely explained. I am one of your subscribers.
Your passion for two stroke is much appreciated.
You are clearing many unanswered questions for the people like me who have minimum knowledge about these issues.
I own 1993 rx 100. Stock condition.
I do get this noise from right side of the engine, is that ok to continue with that noise or does it need to addressed as soon as possible?
Kindly reply.
Best regards
Dr Shiva Bharani
Hi Shiva..thank you for your kind words.
If you're certain that the noise is from right side, then it has to be clutch. If it is slight and addressed at the earliest it will save few bucks and keep the original thing in bike. Carrying on with that noise might aggravate the problem and costs would be major.
Sound is basically primary sign of beginning of the problm. No harm, get it checked one time( not necessarily ASAP)
Thank you for your reply!
I just seen it now.
Sorry for delay in responding.
Sir please make video RX 135 Reed valve problem
Okay.
Sir I’m having RX 135 4s in stock condition ( recently restored). It runs with 18 inch wheels, mikuni oem Japan carburettor, and a 0.50 mm piston. My bike only goes 95km topspeed without pillion. Please help me to gain more topspeed.
Waiting for ur reply.
Most probably don't go after top speed cause most people love to see the bike and maintain good firing and good engine health it'll stay close to you longer
Bro shall we use sleeve cylinder ?
It will good ?
Depends upon sleeve quality..
Sir after engine is.on and I press the clutch lever fully then the thud thud noise continuously coming but as soon as lever is released then no sound..any idea what might be the issue.. I have RX 135 4 speed
Thanks you Sir it Really Helped 🙏
Very nice bro..aap mjy yai bataw bro fazer ka sound problem kyu hoti hai aur theek bhi nhi hatai hai..koyi us kaa sound thk nhi karta hai..koi solution bataw
Superb Buddy 👍
Brother, currently experiencing a problem, my bike is having the same noise you stated... i have replaced new basket, new inner basket, new steel plates, new cork plates, new pressure plate, still the sound persists. Does riveting the basket too tight so that it cant dampen the sound on the rubber makes sound ?... Or we want a very very little play to arrest that sound ?
Bro did u arrest the sound
Bro,can we fit rxg clutch bell (72 teeth) with matching primary gear and oil pump gear Instead of rx135 (74 teeth) for rx135.
Yes yu can
Full support
Nice video bro.
Good explanation bro.
Bro Yamaha RX100 original OE brand new cylinder kit available ha?
Please tell bro very urgent.
Thanks bro..
No bro, sorry I dont have cylinders to sell.
@@MotoTravelRide it's ok bro
Great video
Hey, do you have torque specs for Rx engine ?
Superb..... BOSS
Informative 👍
Thanks 🙂
What will happen if there's play between primary gear and clutch gear? Can this make noise as well?
There remains a minor gap. But in case you've pitting or worn out tooth on any primary or clutch gear.
It will cause noise.
@@MotoTravelRide i have gone to a mechanic for clutch noise issue. he showed a minor gap between those gears and he told me that was the reason for that noise and asked me change it
@@balajimuthu6628 if you're able to see that gap.. then it's not a minor gap.
It's major. .you have to replace it then.
But make sure to check rest of the things that are explained in this video.
Bro i got damage one of the tooth of clutch belt with the screwdriver when i tighten the crank shaft and it make a very loud noise. I just want to know is that true because the mechanic said that the reason of the noise. If it is so can i smoothen the damage tooth with sandpaper?
Awesome brother
Some say another reason for the sound is roughness of the gear teeth face of primary and bell gear teeth. Can I polish the teeth face to a mirror finish?
No... its waste of time.
Very nice video👏.
Great Knowledge
Bro I have one spare clutch bell of rx100 can I change rx100 basket & replace with rx135 basket that fit to same bell ur previous video u said use rx135 for increase more pickup
Nice guidance bro
Thanks
Fourth is the humming noise problem due to worn/damaged clutch gears teeth.
Hi bro, need some clarification on primary gear and clutch bell. What are all the sound arises if primary gear or clutch bell is worn out and how to identify it and change the parts.
Physically by seeing it you can verify..and change
@@MotoTravelRide ok, Thank u bro. Does it produce any sound if teeth of primary gear and teeth of clutch bell is worn out. Because my mechanic said in my bike that teeth of primary gear and clutch bell is worn out so it producing sound, that's why I am again asking this question bro. What he said is true ?
Hi, I’m getting this humming sound as you said my mechanic told me to get the clutch bell. Is just clutch bell enough pls reply
Hi.. one who is physically checking it can say in a better way. It all depends on the wear n tear.
Its all explained here , Refer to video nicely and check with your mechanic .
@3:24 do i have to change full clutch bell or only clutch housing?
Specifically @3.24 : damping rubbers get worn out.You just need to get the rubber bushes replaced and riveted .
thanks for information 😎✌👍
Thanks Sir nice video 🙏
How much new clutch bell costs
In range of4-6k.
As I'm aware back in 2019was 3900 rs. .
Can use rx135 chain sproket set to
rx 100
Yes you can.. but there is no point or benefit of it
Hello
Is there any shopping sites i can buy rx parts?
Many are there on internet, social sites...I can't recommend any, go at your own risk.
I am gettibg noise from both sides of engine that is kick side and clutch cable side but when i press the clutch lever noise stops ,please reply.
Sound gets dissipated all around ,its a closed area ..
your problem is from the clutch assembly side.
Good brother
plg make vidio on piston and piston ring sound
On my 1991 rx100... I observed the rattle sound from the clutch cover... If I depress the clutch lever, the sound disappeared... If I release the lever the sound resumed... Is it the issue with clutch?
Yes it's the issue with clutch... check all 3 components of clutch assembly..refer the video you'll be able to figure out the faulty part.
@@MotoTravelRide Sir thank you
bro, my rx gives some kind of whining noise frm the clutch side, if i pull the clutch in, the sound stops, if i release the clutch the sound comes, do you have any idea about this bro? pls kindly help and do reply😁
free play of basket excess or the side walls damaged. Or even can happen from damaged teeth of bell. Open chck
@@MotoTravelRide thanks ❤️
Motorcycle running condition me right side me khichati hai kya problem hone se aise problem hota hai?
Please koi solutions suggest kijiye
Alignment,wheel /worn out tyre
Dose the pick-up of rx100 decrease if these rubbers are damaged
Yes
Any difference in performance if I fix fiber clutch plates in RX10?
Yes a lot... As they are light , the response become faster .
MotoTravel When we re-revate the clutch basket it will work same as the original?
There is a 50-50 chance. Depending upon the skill level if the person who does it.
Is clutch sound comes when bike is in idle?
yes it can come...
Super my problems solved
Happy to hear that.. thank yu
Hey bro I have a 1995 RX100 and the problem that I am having is that after riding my bike for like 30 mins my engine misses and shut down as if fuel has finished. After waiting for 10-15 mins the bike starts again. Can you guess and tell me what the problem is? Some people have told me that I need to change my entire piston block but I don't think that's the case. Is it a problem of the Reed Valve? Also it smells like kachha fuel sometimes. Would be really great if you can help 🙂
Hi.. it can be anything only in the electronics..
Ht coil( under tank) most primary suspect.
Or the Cdi or at last the pulse coil under magnet .
Dm on Instagram ,can elaborate you to rectify it.
Where to get original clutch housing and boss for RXG? IF buying after market product, which one to buy and where is it available? Please give me an idea of the costs as well.
clutch housing are no more in production. go for after market, the only option. ( pick locally by ordering at shop).
might cost 200 around for centre, 300 boss and 400-500 basket..
@@MotoTravelRide Thanks 👍
Thanks bro
Pls tell me the atomizer of rx 135 5 speed is it same on 135 and 100
100's
Where can i buy rx135 clutch housing
Sir 135 Ki Sound 100 ke jaisi kaise bnaye. Or power box hta de to kya hoga 135 se . Plz
Rx100 ka silencer use krne se same sound ajaega..
135 se air box hta dene se bahot minimum fark padega.
MotoTravel so thanks sir
Bro. That kat kat sound comes in idling and vanishing as soon as i apply clutch. Why so.?
Thanks bro ❤️
Bro how to stop rx135 clutch jerking problem if we riding 50 km speed if we release throttle the engine got jerking what is the solution for that problem bro
I want to buy this from where I'll buy
Thanks
Sir mare gadi speed me sity Marti he clutch side ce kay problem hua hoga
Sir maine sab naya aur sahi se lagaya... fir bhi fewww fewww karke sound hote hain. Kyu sir ? Pls solution dijiye pls.
Hello Brother,
recently i have got serviced my bike and changed the new clutch plates and steel plates as well original from yamaha. also set the clutch setting as you told in previous video. but my bike is just making sound but not running properly... there is not that good pickup that rx have in actual. i am having OE 5speed block piston 100 number kit installed in my 4speed engine. can you please tell me what could be the problem and how can i solve it also please tell me how can i properly tune it. looking forward for your reply... Thank you.
Hi ankit...
First thing have a go through this video and find out if you had any of these issues with with the clutch components..
If non was there ,then there there is a chance that the bell tooth or the primary tooth either of them is not matching or worn out becoj of which the noise comes.
@@MotoTravelRide actually making sound in the sense bike just aawaj kar rahi hai but bhaag nahi rahi hai... mean there is not pickup and all even after changing the new clutch plates... also i have inspect all the things already that you showed in the video brother there is no such issue in the bike. thank you.
Instagram me msg krlo brother aap.. will need more details from you.
Please sir contact no.
My yamaha rx100 makes unpleasant sound while in consistent speed..... It sound like "fad fad fad fad" have you observed or experienced such kind of issue... Please do reply how can I fix this issue....
Check gasket leakage of the exhaust bend ..
2gaskets
@@MotoTravelRide Yes there is leakage I will try to fix it thanks for reply sir❤️🔥
Sir rx135 chuatch basket ke bichame ORING he KyA sir .
Original me rehta hai O-Ring . Lekin agar nahi bhi hai to koi problm nhi h.
Brother I want your clutch basket old stock
That's not for sale brother .
How much price bro new one
Aluminium velding karwa ke rub kar karke gap Phil kar sakte hai muskil kam hai
Bilkul kr sktey hain.
Bhai rxz ka engine restore kiya aaj hi
Lekin clutch dabane ke baad engine mein se cut cut awaj a raha hai
Bhai clach hawsing Ka ek kat hua hai Kay kare
Sir clutch dabane k bad b mera clutch disengage ni ho rha kya problem hai???
ek video channel pe clutch setting ki hai.. check the once.
Nahi sir ji.. iska aur ek sound karte hain. Fewww fewww bohot awaz hote hain.. woh kaise thik kare?
Hello brother im kerala
Ok
👍😎
Bhai pura hindi me videos banao
தமிழ்
Guru jiiiiii _/\_
Guruji ♥️
Bhai mobile nob
भाय बिच बिच में तामिल भी बोल थोडी.
Sir aap hindi me banya karo
Nomba dedo bro please
Sir I’m having RX 135 4s in stock condition ( recently restored). It runs with 18 inch wheels, mikuni oem Japan carburettor, and a 0.50 mm piston. My bike only goes 95km topspeed without pillion. Please help me to gain more topspeed.
Waiting for ur reply.
Okay.. 18inch wheels one both side??
MotoTravel Yes bro. 2.75/18 on both wheels
Okay.theb It's actually showing you faster speed, but going slow around 85-90kmph only
Message me on the instagram... moto_travelxd , need more details.
Thanks bro👍
Bro how to stop rx135 clutch jerking problem if we riding 50 km speed if we release throttle the engine got jerking what is the solution for that problem bro
Bro my bike same problem any idea