Kwikset Powerbolt 2 Installation - Touchpad Keyless Entry Deadbolt

Поделиться
HTML-код
  • Опубликовано: 2 янв 2025

Комментарии • 110

  • @darrellhicks360
    @darrellhicks360 2 года назад +1

    Content A+
    Clear Instructions A+
    Creativity A+
    Confidence building A+
    Overall A+++++++++++
    We are so in love with you! I am an old lady and I was able to switch out my deadbolt for the electronic due to your brilliance. Thank you so much!

  • @yeshuaneitheristheresalvat8018
    @yeshuaneitheristheresalvat8018 Год назад +1

    Perfect buddy, thanks. Just a reminder to use alkaline (non rechargeable) batteries. The ones in the video are not. When my wife and I bought this lock, we initially picked up the ones in your video, but after reading the box, we put them back and got alkaline. Thanks for perfect instructions, and clear close up video.

  • @jaschembra
    @jaschembra 2 года назад

    Great video! Clear, slow, and closeups were great. My husband installed our front door lock and handle and it needed lots of adjustments (not because of him, but because of the door). So, while he is deer hunting, I installed this deadbolt on our garage door. Easily with your video (the instructions that came with it were good as well but videos are great). 👍

    • @PhilCrockett
      @PhilCrockett  2 года назад

      Good job!!! hope he got a deer. have him look at my deer sausage videos.

  • @darrellhicks360
    @darrellhicks360 2 года назад +1

    UPDATE
    I love you more than yesterday and less than tomorrow.
    I just installed my second electronic deadbolt per your instructions. I am happy to report that while it took one hour to install the first one, it only took 30 minutes for the second.
    👍🏻

  • @melaniebrekeen3359
    @melaniebrekeen3359 3 года назад +7

    Thank you so much for putting this video out!! It sure helped me fix my daughter lock that I messed up!! 😊👍

  • @candicewallace48
    @candicewallace48 3 года назад +5

    You are awesome!!! We struggled with code for like 1 hour! Never mentioned 1st round using “0”. Then it worked perfect! Thank uou

  • @prettybird2588
    @prettybird2588 Год назад

    I followed directions and it was flawless. Thank you

  • @l.c.6261
    @l.c.6261 Год назад

    Great video! Easy to follow verbiage, with no extra words or thoughts...just the correct info. Thank you!

    • @PhilCrockett
      @PhilCrockett  Год назад

      Yeah, I try to keep it to the point. Thank you for watching, and commenting, my friend.

  • @SaiAbhib2
    @SaiAbhib2 2 года назад +1

    Great instructions.
    The process made me really comfortable in replacing the lock unit.
    Thank you

    • @PhilCrockett
      @PhilCrockett  2 года назад

      Glad it helped! I love comments like this! Thanks for taking the time, Sai!!!!

    • @jaredb4283
      @jaredb4283 2 года назад

      Same

  • @gradskooler7308
    @gradskooler7308 Год назад

    Thank you for this video. It allowed me to DIY this new lock successfully.

  • @4andaquarterkittycat426
    @4andaquarterkittycat426 2 года назад +1

    Excellent simple video I've been working on that crazy lot for days I even had a locksmith out and he couldn't do it right

  • @mynekamartin1570
    @mynekamartin1570 3 года назад +2

    Thanks so much for this step by step video! I was able to follow and the install was easy!

  • @OriginalCoons
    @OriginalCoons 3 года назад +3

    This was so clear and thorough. I wish all instructional videos were like this.

    • @PhilCrockett
      @PhilCrockett  3 года назад +1

      Glad it was helpful! Hope you like my other videos as well!

  • @deepakkhadka3961
    @deepakkhadka3961 2 года назад

    Very detailed and easily explained. Thank you very much for making it easy 😊

  • @jazharvey6157
    @jazharvey6157 2 года назад

    This literally saved me! Thank you for posting this!!!!

  • @debbiestephens9624
    @debbiestephens9624 3 года назад +1

    Fabulous instructions! You made it easy.

  • @hillarymalmberg4343
    @hillarymalmberg4343 4 года назад

    Thanks for the video! I just used this video to help install this electric deadbolt on my front door today and everything went smoothly, it was a big help!

    • @PhilCrockett
      @PhilCrockett  4 года назад

      Nice job, Hillary! Thanks for taking the time to comment. I hope my other videos are just as useful to you.

  • @kayowhale1961
    @kayowhale1961 2 года назад

    The best video, Thank You.

  • @iselaperez2882
    @iselaperez2882 3 года назад +1

    Thank you so much!!! I installed mine myself💪🏻

  • @hstubble
    @hstubble Год назад

    Excellent video.

  • @yudaimi10
    @yudaimi10 3 года назад

    Thanks for posting this it was easy to follow

  • @edherz
    @edherz 2 года назад

    Good job they should pay this man

  • @FrankLadd
    @FrankLadd 3 года назад

    Thank you so much. You video saved me some time!

  • @lazmotron
    @lazmotron 2 года назад

    Great video, very helpful.

  • @greggmcdermott3831
    @greggmcdermott3831 3 года назад

    I love you man !
    You saved my bacon

    • @PhilCrockett
      @PhilCrockett  3 года назад

      mmmmmmm..........bacon.......mmmmmm. BTW....you're welcome, Gregg!

  • @keqigan1923
    @keqigan1923 3 года назад +1

    Very detail about the installation, I think I will be able to do it. Thanks very much. BTW, do you have a code changing video for lazy people?

  • @jobekirkuk
    @jobekirkuk 3 года назад +1

    You are awesome brother, thanks

    • @PhilCrockett
      @PhilCrockett  3 года назад +1

      No prob! THANKS for watching and commenting!!!! Hope my other videos are just as useful!

  • @juliegreen3651
    @juliegreen3651 4 года назад +1

    Awesome and easy to understand video. So clear were your instructions, I might even try to install this myself. Love that your video was short and sweet and to the point. Have drill, will do. :)

    • @PhilCrockett
      @PhilCrockett  4 года назад

      Julie!!! YOU CAN DO THIS! If I can do it, you can do it! Let me know how it went.

  •  4 года назад

    You made it look easy Phil. When the batteries need to be changed do you have to reprogram the pass number again?

    • @PhilCrockett
      @PhilCrockett  4 года назад

      I have an E-lock on my shop door that the batteries were dead one time. I put new batts in it and the same code worked. So hopefully, this lock works the same way.

  • @lewiemcneely9143
    @lewiemcneely9143 4 года назад

    Yo, Phil and hope yall are doing well and not washed away. We got over 7 inches this time and 5 the last time. Oh well. Such as it is in mountain tropics! We're exceedingly goofy here but trying to dry out a bit. More than likely won't make it for a while but such is the way it is. That's a nice lock but I'd forget the numbers and loose the blasted key. Thanks, Buddy and yall be calm and GBWYall!

    • @PhilCrockett
      @PhilCrockett  4 года назад

      Hopefully our rain is coming today! So dry here. Temps are going to drop pretty low this week too. Pulled my peppers out of the garden last night and stacked some firewood in the shop. I'm ready for deer season now. Have a great Lord's Day, Lewie!

    • @lewiemcneely9143
      @lewiemcneely9143 4 года назад +1

      @@PhilCrockett Hope you got your rain and will fill the freezer. And we can thank our Maker all the time for His Blessings! A Jesus weekend to all yall 2!

  • @xero402
    @xero402 3 года назад

    Thanks, I have 3 of these to install.

    • @PhilCrockett
      @PhilCrockett  3 года назад

      Excellent! Let me know how it went, Tony!

  • @duckis
    @duckis 3 года назад

    How do use the lock do I just put my code in and it will open or do need to press lock after putting my code in

  • @trilander33
    @trilander33 3 года назад

    Very helpful - thank you! Question though… I have to enter my new 4 digit passcode and then hit the middle lock button to unlock the door from the outside but is there a way to get the door to unlock WITHOUT having to hit the middle lock button after entering my 4 digit passcode?

  • @ego5801
    @ego5801 3 года назад

    Thank you for the video. It was clear and direct!

  • @joser.drossrecio398
    @joser.drossrecio398 2 года назад

    Gracias 🙏

  • @dadoo985
    @dadoo985 2 года назад

    Can you make it beep when someone enters door without code. As an alert someone entered while unlocked

    • @PhilCrockett
      @PhilCrockett  Год назад +1

      This model does not offer that option, unfortunately. Good question!

    • @dadoo985
      @dadoo985 Год назад

      @@PhilCrockett Would b awesome

  • @thepaos3019
    @thepaos3019 3 года назад

    Hi! When I opened the package the lock on the interior assembly moved smoothly. Somehow while setting it up, it started “sticking” halfway thru the turn. It will still allow me to turn it but with more force than necessary. Any ideas on how to reset this? I have changed batteries, reset several times and still can’t get it to go back to moving smoothly.

    • @PhilCrockett
      @PhilCrockett  3 года назад +1

      I really don't know. I have not had this problem. Maybe someone else here can help???

    • @dab1463
      @dab1463 3 года назад

      Maybe don’t tighten up screws too hard. If it won’t help call your local locksmith

    • @msjmid6819
      @msjmid6819 3 года назад

      I'm having the same problem

    • @ganistambek
      @ganistambek 2 года назад

      @@msjmid6819 me too ;(( did you find the solution?

  • @magicalgothgirl666
    @magicalgothgirl666 3 года назад

    I can't get past step 6B. I put in the Master code and it will give me the successful beep and green lights, but will give me three red beeps when I hit the lock button directly afterward like the instructions say

    • @PhilCrockett
      @PhilCrockett  3 года назад

      Probably best to reset it and start over.

  • @florinvisan5014
    @florinvisan5014 Год назад

    How about directions?
    My door is opposite then yours.
    How do I fix that ?

    • @PhilCrockett
      @PhilCrockett  Год назад

      hmmmm.... The lock should've come with instructions. However, that is a really good question.

  • @crazyhorse851
    @crazyhorse851 2 года назад

    Why does mine only work when it's in the lock position?

    • @PhilCrockett
      @PhilCrockett  2 года назад

      not sure

    • @crazyhorse851
      @crazyhorse851 2 года назад

      @@PhilCrockett thanks. I think its only right handed door knobs actually.

  • @rajaboyd8891
    @rajaboyd8891 3 года назад

    once we got to the 0000 and lock button nothing happened, i reset it twice

    • @PhilCrockett
      @PhilCrockett  3 года назад

      Not sure why? did you try cussing while doing it? jk. I had a lock one time that didn't cooperate too.

  • @MrVinnyboombottz
    @MrVinnyboombottz 3 года назад

    Coding doesn't seem very secure. For example what is the difference between code 1357 and 2468. It seems a random pattern will eventually unlock the door, especially if someone sees your pattern. Am I understanding this correctly?

    • @PhilCrockett
      @PhilCrockett  3 года назад +1

      You are understanding the power of statistics and repetition. The funniest thing about exterior locks is the fact that people have windows all around their house. IOW: Like my Dad use to say.....: "locks keep the honest people out"

  • @zinkzxd2891
    @zinkzxd2891 3 года назад

    TY bro, lost the programming instructions!

    • @PhilCrockett
      @PhilCrockett  3 года назад

      ya.....the instructions are awful anyways,,,,,

  • @securityman6666
    @securityman6666 2 года назад

    What the hell is a "torque blade"?

  • @alliebliitz
    @alliebliitz Год назад

    Won’t work for me :/ idk

    • @PhilCrockett
      @PhilCrockett  29 дней назад

      Not sure why but maybe try again.

  • @maxstuckert
    @maxstuckert 3 года назад

    Installing it was easy. Now I can’t take the damn thing off which is how I ended up here.

    • @PhilCrockett
      @PhilCrockett  3 года назад

      darn!

    • @maxstuckert
      @maxstuckert 3 года назад

      @@PhilCrockett got it figured out. Just needed a little bit of force and wiggling.

    • @PhilCrockett
      @PhilCrockett  3 года назад

      good to know!

  • @securityman6666
    @securityman6666 2 года назад

    Do not install the batteries until after you have the lock mounted!!

  • @eliseoarebalo440
    @eliseoarebalo440 4 года назад

    👍

    • @PhilCrockett
      @PhilCrockett  4 года назад

      Glad you liked my vid, my friend!

  • @NinaDenver
    @NinaDenver 4 года назад +1

    Didn’t work

    • @PhilCrockett
      @PhilCrockett  4 года назад

      hmmm...... made the batteries are not in the right orientation. I do that once in a while.