We could not get our lock to work, but by watching your video we saw that we had made a mistake and jumped a couple of steps. We were able to reset the codes and lock and it is working perfectly now. Thank you so much!
Thank you so much I was trying to find a video that will help me to reset my door lock to factory defults and this was the only one that help me out. Tx.
You have to perform the initialization procedure. Depending on the lock you need to hold down the program button on the inside and then the lock button from the outside. That has happened to me a few times especially with this lock.
Remove the batteries. Press and hold the lock button on the keypad. Place the batteries back in (while still holding the button) The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.
I’m having the same problem installing all 3 of these deadbolts I bought. They just keep trying to turn on their own and the deadbolt is not moving at all.
This series of locks bites, do not buy it. The reason they only give you 1 year on electronics is because that’s about how long it will work then it starts messing up. We will be switching to a more reliable smart lock. I have reset the codes, reset it back to factory condition then it starts messing up again.
We could not get our lock to work, but by watching your video we saw that we had made a mistake and jumped a couple of steps. We were able to reset the codes and lock and it is working perfectly now. Thank you so much!
Thank you so much!!!!! I was banging my head all day until your explanation on how to reset the code!!!
Anytime! Glad to help
THANK YOU, THANK YOU! I skipped a couple steps and you showed me where!
Thank you so much I was trying to find a video that will help me to reset my door lock to factory defults and this was the only one that help me out. Tx.
Thank you so much! I didn’t know you had to program it!!
Thank you for this clear video . It helped tremendously
Can you change auto lock from 30 seconds to 60 seconds?
This video was alot of help thank u so much
Very clear instructions
Thank you!
Are we able to program even numbers w/o the odd numbers??
Yes
@@singh0833 Do you mind sharing how? Please and thank you 🙏🏾
How do you stop the auto lock clicking? When it's activated every 2min it clicks and makes noise. Then we can manually unlock for 60 seconds
You have to perform the initialization procedure. Depending on the lock you need to hold down the program button on the inside and then the lock button from the outside. That has happened to me a few times especially with this lock.
If you need to do a factory reset, remember to perform the handing process, or you will not be able to enter access codes.
1st code press 1 time, 2d code twice and so on
How do you reset codes?
Remove the batteries.
Press and hold the lock button on the keypad.
Place the batteries back in (while still holding the button)
The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.
Lock will not rotate constant torque third installation still no progress
Did you check the battery?
I’m having the same problem installing all 3 of these deadbolts I bought. They just keep trying to turn on their own and the deadbolt is not moving at all.
Don't know why happened finally started working ?? I'm lost
@@daniellerieck3159 it's possible you didn't install the latch properly especially if it's occurring on all 3
@@flipsidephilly2980 I figured out that when you put the batteries in you need to hold the lock button for 30ish seconds. Then it will work.
This series of locks bites, do not buy it. The reason they only give you 1 year on electronics is because that’s about how long it will work then it starts messing up. We will be switching to a more reliable smart lock. I have reset the codes, reset it back to factory condition then it starts messing up again.
How do you delete the old code