How to Program a Rain Dial Controller | + bonus features
HTML-код
- Опубликовано: 30 июн 2024
- Help support this channel AND take a deeper dive into your irrigation education on Patreon at Sprinkler Pros Academy: / sprinklerpros
Do you own or operate a Rain Dial controller and need some help programming it or operating it?
In this video I will show you how to do that and offer you a free download to help you with your programming.
Resources page: sprinklerpros.net/resources-i...
Free helpful downloads: www.irrigationsystemexpert.net...
Chapters:
0:00 Start
0:51 3 main things
1:06 Programming 101
6:10 Operating it
7:24 Technical features of the RainDial
Music and photo credits:
Title sequence music created for Sprinkler Pros by Ben Erickson of San Luis Obispo, CA
Epidemic Sound music credits: Use this link to get one free month with Epidemic Sound: share.epidemicsound.com/nplbl0
Minutes into Days by The Present Writer
Visit my other sites and channels:
Buy my fun lyrical book Finney's First Flight: sprinklerpros.net/link/finney
Learn about the Gospel: www.spreadingthegospel.org
Into trains? SLORailfan: / @slorailfan
My adventures channel: / @tomlaniervariety 
Хобби
![mgk - Sun to Me (Zach Bryan Cover) [Live from Cheshire Cottage]](http://i.ytimg.com/vi/_ZnbTEs4O6U/mqdefault.jpg)
I watched other videos and was confused but your explanation was clear. I set the sprinklers in minutes. Thank you! 👍
Awesome! Thanks for letting me know.
thank you for such a specific, simplified video. well done! i have struggled setting my own RAIN DIAL for years and always failed and got frustrated. i didn't even think about reaching out to RUclips for a tutorial and then i found yours. i didn't feel talked down to, and my frustrations went away. much appreciated! 😄
Eileen, so glad it helped. Anything else you need help with?
Best video describing the programming of these controllers. 👍
Thanks! 👍
Great instructions, clear and concise..
Thank you for saying so. It helps to know whether I'm being clear..
All i can say is Thank you!!!!! I watched other vieos and was confused.
Awesome!!!!!!
Have you seen my video called _Programs A B and C, What are they for?_
@@SprinklerPros no, I have not.
It might help you.
Very informative,simply understandable, best video ever, thank you very much.
Thanks Tom! I only have one customer with this controller. Gonna save this video for a reference.
Please do!
Great video thank you! Easy to understand everything
Glad it was helpful!
I got great advice from you on my 15 station station thankyou!!
Roxanne, how did it go? What did you figure out was the issue? Multiple start times?
Great video, thanks. I volunteer at a small native plant nursery in Australa, we have 10 zones on a Rain Dial R controller and I am looking to add soil sensors (if they can be added) but at a minimum the ability to adjust things remotely via a smartphone.
I'd like to see a similar video for the Rain Dial on how to add wifi to it and remote access via phone. I also like your other best timers video and it would be great to see one that concentrates on their remote capabilities and which is best for that plus integration with soil sensors etc.
Hi Dennis, Great to hear from you.
Irritrol has a wifi system that can be cabled to the RainDial (RD) but I have never known of anyone using it nor have any of my clients wanted one so I have no experience with it. I have been installing RDs since they were invented and beyond, it's predecessor, the Hardie HR6100. You can visit irritrol.com and look into the wifi setup. As far as moisture sensors go, I ditto my experience with those too. The only sensors I've installed are rain sensors and Hunter Solar Syncs. Moisture sensors can be tricky since you are counting on the soil throughout your property to be consistent incl. sun exposure and drainage. I'd love to help you out with those sensors and the wifi but I don't have plans anytime soon for video creation for those. Baseline is one of the most popular pro grade soil sensors on the market. Good luck with all that.
@SprinklerPros Thanks for the detailed response, I'm now looking at the Hunter Hydrawise system as a good replacement, as it can apply sensors to zones (and not the whole lot). For example if you have a covered area (greenhouse etc) then you don't want a water sensor to affect its water! Its app/browser interface is also pretty good and easyish to use. It also supports flow sensors turning off the watering if a pipe bursts.
I think I will avoid soil sensors tying into the watering but may by some cheap models so I can get an idea remotely that all is good.
Cool.
The Raindial timer was in our home when we moved in. Your video was very helpful on how to set it up. I do have a question that I haven't been able to figure out from the cheat card. We want to set up different days and times for grass and drip using the A, B and C buttons. When I'm done programming, do I always leave that button in the A position? Thanks for your help in figuring this system out!
Lizzie,
Have you watched my video called Programs A, B, C WrTF? That video might help, but to answer your direct question, when you are finished programming it, it doesn't matter where you leave that program switch. Thanks for checking in.
@@SprinklerPros Thank you so much for the reply. That helps a lot but I will also go watch your video you mentioned. Thanks again!!
Nice video. Two questions: 1) If you run a zone manually and then leave the dial on that zone, will the system continue to progress through the programmed stations, or does the dial have to be put back onto the "current time" position in order for the programming to resume?
2) Can the timer turn on one zone by means of a program and a second zone by means of a manual request? (I called for a manual run today for one zone and then noticed that a second zone was dripping at the same time - had never seen that happen before).
Thanks.
Keith, you must put it back to RUN for the programming to resume. Only one thing can operate at a time.
My Rain dial has 2 battery connection points. As from your video the one keeps your program settings. What does the 2nd battery connection do.
Your video is very informative
Thank you
Tony, where is your 2nd battery connection point? The only one I'm aware of is on the backside of the interface panel.
Hey Tom great videos I got a irritol 600 timer ,on switch A the valves keep coming on how to I fix problem? Wud be much appreciated sir
There are several possible reasons for that and I would need some clarification. Call me next week sometime and we'll try to figure this out over the phone while you're at your timer.
hi, thanks! Is there a seasonal adjustment variation, say, to up your minutes across the board for 20% in hot weather for a while?
Hey! There is no seasonal adjustment (some brands call it Budget) on the RainDial. My long-time suggestion for RainDial owners is to set all the run times for an amt. you can be happy with all year then just add or eliminate days of the week. It's a much quicker/simpler way to make those adjustments. Like that idea?
@@SprinklerPros thanks, I had 3 times to up the minutes by 20% each, simple math, kept days (every other day, mainly) same, will back down by same number of mins after 100 degree heat retreats.
When setting the program, does it matter which start time to use? Our clock is not working right(will not record PM times) on start time 1, so we will set with start time 2. We are only using program A. Thank you!
JR, No it doesn't matter which start time you're using on RainDial timers. That's a unique problem I've never heard of before that you're experiencing. Does your RainDial timer have a blue interface? The date code is inside the battery compartment. What is the date code?
What are the different start times for? I have start time 1 and 2 set at 7:30pm. Each station set to run for 5 mins. Once it runs the stations, it essentially repeats the entire cycle again. Is it because my start time 2 should be off?
There are many situations where using more than one start time can be beneficial but most people only need to use one start time. Because you have both start times set for the same time (7:30pm), that is called stacking. When it completes the cycle for start time #1, then it will run the 2nd cycle that is set for the same time so it is defeating your purpose. What I believe you are intending is for your system to start at 730pm and have all your stations (zones) activate sequentially. That will be accomplished from having just one start time.
With that said, to answer your original question, one scenario is if some of your watering is on a slope and the water runs off too fast to soak in. In this case watering on start time #1 for maybe half the intended run time, then later running start time #2 for the other half. Another scenario is in very hot weather days (100+ deg) it might be best to water early in the morning and then around 1pm. Greenhouses oftentimes need to water several times a day for their seedlings. Glad to hear from.
GREAT VIDEO! Will you check my thinking? My irrigation system is set up for 3 programs (A=Citrus trees, B=Plants, C=Palms). To program, I set it to A and set the start time (1) for 6:00AM. I just want it to run once. The other start times are set to OFF. I set the day to Wednesday so they are watered once a week. Then I set the run time (1) to 2 hrs., as recommended by the nursery. The other run times (2-12) are set to OFF. Then, for B, I set the start time (1) for 6:00AM. I just want it to run once each day. The other start times are set to OFF. I set the days to Monday and Thursday so they are watered twice a week. Then I set the run time (1) to 1.5 hrs., as recommended by the nursery. Then, for C, I set the start time (1) for 6:00AM. I just want it to run once. The other start times are set to OFF. I set the day to Tuesday so they are watered once a week. Then I set the run time (1) to 2 hrs., as recommended by the nursery. Does that sound right?
Lynette, for B and C you didn't tell me which stations/zones are set to run on them. Have you downloaded my free sheet to help you with your programming as noted in the video? It will help you with this.
@@SprinklerPros Yes, I did downloaded the sheet. But I'm going to have to ask the installer what stations/zones go with each program number. I don't know the answer.
If you turn on each station one at a time using the manual mode, you can walk around with your sheet and clipboard and pencil and figure it out yourself.
The instructions of how to use the manual function is printed on the instructions on the card inside the door of the timer.
I have the rainbow 600 system and as soon as I turn on the water supply the sprinkler works and won’t shut off. What am I doing wrong?
Mark, I have only seen one Rainbow timer and that was a few months ago when I replaced it with a RainDial RD600EXT so I don't know anything about them. To answer your question, though, the problem is probably with the sprinkler valve. There may be debris under the diaphragm. If this doesn't help, let me know in a NEW comment.
How do you set it to come on twice a day? We only have one zone and it comes on at 7am I would like to set it to come on again at 7 pm
Christine, set a second start time.
I have all my watering days on program A tha say skp sequencing mode and my system is not watering. What does sequence mode mean and how do I get out of it.
Lenny, page 3 of the owners manual says,"Station sequence delay - Provides an adjustable delay period between stations during the operating sequence to accommodate slow-closing valves or a required well-recovery period."
I have never encountered this. I looked through the manual but couldn't find a way to get out of that mode. You may need to call tech support. Here is the manual if you don't have it already: cdn2.toro.com/en/-/media/Files/Irritrol/products/controllers/rain-dial-r-series/373-0538V_d.ashx
Is there a reason why my display where it shows the time keeps on flickering?
Yes, the circuit board or panel/interface has gone bad. What is the date code inside the battery compartment?
How do I get rid of even days setting. I can’t seem to change that.
Adriana, I have provided a link here so you can download the manual. The answer is on (printed) page 25 aka pdf page 27. cdn2.toro.com/en/-/media/Files/Irritrol/products/controllers/rain-dial-r-series/373-0538V_d.ashx
Does the system only run 1 program at a time? Let’s say my program A runs everyday out of the week, program B runs only 3 days out of the week, and program C is my “test” one. Does the system only run whichever program I leave the switch on?
Andrew, great question. It doesn't matter which program you leave the switch on. It will water whatever is programmed.
So if my program A is set to run at 6 am and 6 pm, and program B is set to run at 12 pm only, will my system go off 3 times in the day? Even if I leave my switch on program A.
yeppers
So if I have program A set to run at 6am and 6pm, and I only want it to run those two times I have to make sure the other programs are not set to run?
Andrew, sorry for delay. your question was way down the list and I just now saw it. Your question is correct.
How do I reset the rain delay feature?
I have never used that feature so here is the pdf manual: cdn2.toro.com/en/-/media/Files/Irritrol/products/controllers/rain-dial-r-series/373-0538V_d.ashx
Also is it possible to reset it?
Resetting it is a last resort and doesn't address the reason for your problem so you might accidentally re-create the problem if you erase the program now without figuring this out. See my other answer on your other comment.
Tom there was a fuze error flashing on screen because timer wire to valves was hit by a nail in lath stuck wall .I didn't instal timmer the wire shud have been in coduit.this is at my buddys house he hired me to fix it. So I installed new timer wire in ground to valves . So no fuze error now. This is 2 valve job. But selected switch in a position A the 2 valves keep running .so it works good in B position great. So that's why maybe timer needs to be reset imo?
ok