Expanding the UPS with additional batteries, part 4. From A to Z
HTML-код
- Опубликовано: 15 июл 2024
- If you like the content I publish, you can support the channel. Thank you
Support with:
suppi.pl/szymonhawlicki Possibility of support via BLIK and 18 Banks
paypal.me/szymonhawlicki?coun... Direct transfer to PayPal account
tipply.pl/u/szymonhawlicki Possibility of support via BLIK, PayPal, PaySafeCard and others.
I would like to thank anonymous and named people for supporting the channel 😁 thanks to you, the channel remains independent 💪
Links to materials used in the video:
By using affiliate links you support the channel, thank you.
Microphone 🎙️ SYNCO G1 alii.pub/6mq47k
BK200 KONNWEI, battery tester meter 🔬🪫🚙 alii.pub/6wxim9
Modeling plugin 🔌🎨 XT60 alii.pub/6ps3nl
DC 2P automatic fuse 🎰👮♀️☀️ alii.pub/6q7ybt
Power bus splitter 🔀🛤️ alii.pub/6t6d9f
XT60 call security 🔒🔌 alii.pub/6xcit1
XT60 connection protection with ear 🔐🔌 alii.pub/6xciu0
RC3563 precision battery resistance meter 🔬🪫 alii.pub/6vhnbw
Fuse base 20x5 🌋👮♂️ alii.pub/6qv9pg
5x20 fuse 🛡️👮♂️🌋 alii.pub/6xcj0f
Welcome to another series from A to Z, in this series of episodes I will be building a point for expanding the Ah capacity of a 12V DC UPS to 230V AC.
In the first episode, I present all the components that will be used in the project and then I start mounting the elements on the DIN 35 rail so as to have an idea of what will be created. It is always worth leaving room for "expansion" and for options that the concept may change.
I start with the main pieces of the puzzle and move on to sewing the electrical circuit. And more to come in the near future 😜
Expanding the UPS with additional batteries, part 1. From A to Z
• Rozbudowa UPSa o kolej...
In the second episode, he mainly prepares the wires for sewing the entire system. Overall, it is the most labor-intensive process and most mistakes are made at this point. It is always worth making longer cables so that you do not have to do everything again if something "changes". The future ergonomics of equipment operation will depend on how we prepare the cables.
Expanding the UPS with additional batteries, part 2. From A to Z
• Rozbudowa UPSa o kolej...
In the second episode, he mainly prepares the wires for sewing the entire system. Overall, it is the most labor-intensive process and most mistakes are made at this point. It is always worth making longer cables so that you do not have to do everything again if something "changes". The future ergonomics of equipment operation will depend on how we prepare the cables.
Expanding the UPS with additional batteries, part 3. From A to Z
• Rozbudowa UPSa o kolej...
Something is already happening, we are finishing the wires that will be connected between the bridges and the batteries. I talk a little about fuses and how to deal with them in DIY systems. It already looks something like this and it could even work, but I'll add some accessories. To be sure, I measured the cables, which I did, but somehow it did not go according to plan and some discrepancies occurred. Fortunately, some conclusions have been drawn, the error is that the decimal point moves from mOHM to OHM, and with this, the resistance of the cables itself is quite high.
Part 4:
What kind of DIY is it without hot glue 🤣 I don't have a box to mount the voltmeter so the decision was made to cover the contacts with warm glue, it looks average but the insulation provides some degree of insulation. After connecting it, you should calibrate the analog voltmeter, it is very useful and even necessary to determine the voltage on the battery during operation. Once everything is ready, it is worth taking care of the "finishing" and making notes about the initial parameters so that after a few years you can verify what happened there.
Timeline:
0:00 - 4:35 DIY using hot glue
4:36 - 6:53 Connecting an analog voltmeter
6:54 - 10:35 Calibration of the analog meter
10:36 - 11:41 Selection of protection for the XT60 connector
11:42 - 13:33 Connecting batteries and changing the concept
13:34 - 19:35 Measurement of internal resistance of AGM batteries
Current episode made with:
Synco - G1L - microphone
iPhone 8 - Audio and video
Assembly - iPad 9
Thank you very much @Kenny88 for creating a trailer for my channel 💪
This is not an instruction, so please do not imitate, I make many mistakes that can cost your life or health, it is recommended that the work be performed by a licensed professional. 
Наука
Odcinek przedostatni😆
Czy to odcinek przed ostatni to nie wiem 😜
@@SzymonHawlicki może w tym sezonie 😀😅😀
@MaoWatt myśle że seria za niedługo będzie zamknięta 😜
Ale kolejna telenowela będzie pod to podpięta
@@SzymonHawlickiczyli przedostatni
@MaoWatt można tak powiedzieć choć budowa już zakończona 😎