We have a new model of Print Head Doctor: model 6. It was designed specifically for Epson print heads, as these heads require extra care. They are too easy to damage with excessive pressure or ultrasound. Model 6 provides only a minimal pressure to a print head, while all the work is done by the vacuum applied to the Reverse Flush cap, keeping the print head safe. Price for PHD6 is $1500 without the adapters. An Epson DX5 adapter is $250 plus you'll also need a Sonic RF Cap for $150.
Indeed. And the printhead alone is quite expensive too. One might notice how easy the disassembly are, as it's made to be service-friendly (relatively speaking, compared to other printers) For small consumers that doesn't need huge print areas I think laser printers will be more cost-effective in the long run.
Your chances of recovering a UV print head with a fully cured ink inside are close to zero. However, if the ink isn't completely cured, the head can still be recovered. It's hard to tell the success rate, it depends on many factors.
the printhead doctor is a great idea, only i can buy 2.5 DX5 printheads for this price so not worth for me. I don't know why you guys complain so much about epson printheads. is there anything better on the market you can satisfy 99% of the customers with and run eco solvent ink for 25$ the liter. I've used a dx5 head for 10 months now printing 5 days a week at least 8 hours. at night i throw some cleaning fluid under the printhead and in the morning it runs great again.
Do you have unrecoverable heads, with permanently clogged/disfunctional nozzles, but with most of the nozzles working ok? I would be interested in buying a couple of those faulty heads for experimenting.
Pocas posibilidades de recuperación si ese cabezal estuvo antes en un equipo chino que usualmente así es,son cabezales reciclados .y ya tienen poco tiempo de vida seguramente después de varios baños ,parezca que se destapa el cabezal .pero falta lo importante cómo se encuentra el sistema electrónico del cabezal ? Ahora bien ver pasar solvente no indica que el cabezal este limpio podría tener ,tinta seca en el interior y seguir tapando el cabezal muy común por cierto en ese tipo de cabezales ,porque usualmente estos se utilizan con diferentes tipos de tintas y esto dña el cabezal.ahora quiero ver un test de cabezal al final .porque es muy fácil mostrar salir solvente .quiero verlo en acción final ya con temperatura ,presión .velocidad y calidad
I have a DX5 print head that is on a Mutoh VJ1204 and I was wondering if you still do print head recovery. What the cost would be? Also if you don't do it anymore could you tell me who might do it? Thank you
Do you have an idea about what percentage of the print head can be recovered with this system. I'm thinking to buy one to start to fix a lot machines and charge the people to clean
The recovery rate depends on how "old" is the clog. If a print head is fresh off the printer, the success rate is over 90%. For badly clogged eco-solvent Epson heads the success rate is around 60%. UV heads are much worse, with a success rate of 50%. I recommend using our new model (PHD15), which can automatically switch the fluid flow direction and thus run the recovery programs without any operator intervention. If you want to chat about it, my Whatsapp is +1-905-782-6274. Vladimir.
hola que tal desde tucuman argentina tengo una ampla eco solv de 320cm con 2 dx5 , los cuales los nozzle de negros, estan funcnionadno mal. purgué con solvente ambos cabezales, pero de los 4 nozzle solo 3 hace cortina de solvente al aplicar con jeringa, 1 esta como tapado, puede ser el cabezal, o el manifold?
Hello, good morning, I tell you that I have a DX5 head for MIMAKI jv33, everything works fine, only the detail is that the plate where the ink comes out is detached. The plate that atomizes the ink was removed. I want to know if it can be pasted again or can you do it?
digitalsigntech.net/PrintHeadDoctor/ The cheapest machine to work with DX5 heads would be PHD11. Select Large tank and Pro panel. You will also need a DX5 Pro adapter: digitalsigntech.net/PrintHeadDoctor/pro-adapters/epson-dx5-dx6-pro-adapter-1
We are using 75kHz ultrasonic tanks with controlled power output, and we run Epson heads at only 12.5W of sonic power. Combined with a higher frequency (75kHz is more than the standard 40kHz or 28kHz ultrasound) this makes the cleaning much safer for the print heads.
You can clean any Epson print head directly on a printer with our PHD-M machine, which starts at only $690. www.digitalsigntech.net/print-head-doctor-mobile.html
With all of that work and labor, its probably more cost effective just to buy a new head because if the cleaning doesn't work then you wasted more money in ink than the head cost, and the head isn't the only part that messes up, you have a pump and then dampers. Those all contribute to clogging.
I need availability and price for 1. Print head for Epson Stylus pro 4400 p/n: F160010, DX5 Epson Water Print head urgently. 2. Epson color 900 Printhead p/n: F072000 Can you help to revert at the earliest and suggest when I can pick it up? Thanks,
You cannot buy our machines in Nepal, but you can buy directly from us in Canada and we'll ship it to you. Our contact details are on www.PrintHeadDoctor.com
All this mess confirms my idea that Epson printers are the most hideous crap ever designed and made. They waste litres of platinum-priced ink during their (short) lifespan and when their ill-designed printheads get clogged (every Tuesday) you have to run the gauntlet to fix them up or spend an arm and a leg for a new one (that eventually will get clogged anyway). Leave Epsons where they best belong: either on the shop shelves or at the recycling centre. They are a technological pest.
We have a new model of Print Head Doctor: model 6. It was designed specifically for Epson print heads, as these heads require extra care. They are too easy to damage with excessive pressure or ultrasound. Model 6 provides only a minimal pressure to a print head, while all the work is done by the vacuum applied to the Reverse Flush cap, keeping the print head safe.
Price for PHD6 is $1500 without the adapters. An Epson DX5 adapter is $250 plus you'll also need a Sonic RF Cap for $150.
sir how can i contact with you
What the price for print heat dx5, thanks
Indeed. And the printhead alone is quite expensive too.
One might notice how easy the disassembly are, as it's made to be service-friendly (relatively speaking, compared to other printers)
For small consumers that doesn't need huge print areas I think laser printers will be more cost-effective in the long run.
very good tool & technical instrument thanks.
can we clean blocked head that was one year without using,
the head used only one month for white UV ink
Your chances of recovering a UV print head with a fully cured ink inside are close to zero. However, if the ink isn't completely cured, the head can still be recovered. It's hard to tell the success rate, it depends on many factors.
Do you offer recovery services for the DX5 from a Mutoh VJ1204? What is your cost and turnaround time if so?
Do you all provide a printhead cleaning service?
where are you from and what is the price of this product. i am intrested in buying this product.
We are from Canada. You can find all our machines here: digitalsigntech.net/PrintHeadDoctor/
My print heads mixes red in yellow ink should I work on them
The dampening plate is made of HDPE or PP. Yes you can order it separately at $10.
the printhead doctor is a great idea, only i can buy 2.5 DX5 printheads for this price so not worth for me.
I don't know why you guys complain so much about epson printheads. is there anything better on the market you can satisfy 99% of the customers with and run eco solvent ink for 25$ the liter. I've used a dx5 head for 10 months now printing 5 days a week at least 8 hours. at night i throw some cleaning fluid under the printhead and in the morning it runs great again.
Do you have unrecoverable heads, with permanently clogged/disfunctional nozzles, but with most of the nozzles working ok? I would be interested in buying a couple of those faulty heads for experimenting.
Pocas posibilidades de recuperación si ese cabezal estuvo antes en un equipo chino que usualmente así es,son cabezales reciclados .y ya tienen poco tiempo de vida seguramente después de varios baños ,parezca que se destapa el cabezal .pero falta lo importante cómo se encuentra el sistema electrónico del cabezal ?
Ahora bien ver pasar solvente no indica que el cabezal este limpio podría tener ,tinta seca en el interior y seguir tapando el cabezal muy común por cierto en ese tipo de cabezales ,porque usualmente estos se utilizan con diferentes tipos de tintas y esto dña el cabezal.ahora quiero ver un test de cabezal al final .porque es muy fácil mostrar salir solvente .quiero verlo en acción final ya con temperatura ,presión .velocidad y calidad
Are you expecting 100% clearing of the nozzles? (or >90% as some refurbishing services offer)
Excuse me for what type of head can this process be done, for any head of epson and mutoh it also works?
my dx5 heads black color is jaam so what i do ?
please reply sir
I have a DX5 print head that is on a Mutoh VJ1204 and I was wondering if you still do print head recovery. What the cost would be? Also if you don't do it anymore could you tell me who might do it? Thank you
Do you have an idea about what percentage of the print head can be recovered with this system. I'm thinking to buy one to start to fix a lot machines and charge the people to clean
The recovery rate depends on how "old" is the clog. If a print head is fresh off the printer, the success rate is over 90%. For badly clogged eco-solvent Epson heads the success rate is around 60%. UV heads are much worse, with a success rate of 50%. I recommend using our new model (PHD15), which can automatically switch the fluid flow direction and thus run the recovery programs without any operator intervention. If you want to chat about it, my Whatsapp is +1-905-782-6274. Vladimir.
I was going to ask "Does it worth it?"... then I saw the Epson DX5 printer... lol, totally worth it.
hola que tal desde tucuman argentina tengo una ampla eco solv de 320cm con 2 dx5 , los cuales los nozzle de negros, estan funcnionadno mal.
purgué con solvente ambos cabezales, pero de los 4 nozzle solo 3 hace cortina de solvente al aplicar con jeringa, 1 esta como tapado, puede ser el cabezal, o el manifold?
como trocar damper você tem video ?
por favor ?
Hello, good morning, I tell you that I have a DX5 head for MIMAKI jv33, everything works fine, only the detail is that the plate where the ink comes out is detached. The plate that atomizes the ink was removed. I want to know if it can be pasted again or can you do it?
No, we can't glue the nozzle plate back into place.
Can we purchase these manifolds? Or the machine?
digitalsigntech.net/PrintHeadDoctor/
The cheapest machine to work with DX5 heads would be PHD11. Select Large tank and Pro panel. You will also need a DX5 Pro adapter: digitalsigntech.net/PrintHeadDoctor/pro-adapters/epson-dx5-dx6-pro-adapter-1
my dx7 mimaki heads leaking from edges. what i have to do?
Is this system of recovery for DX5 for sale? We are considering using it for DTF printing to recover clogged heads.
idealna ultra zvucna kadica,,i sam je koristim u poslu
I have a Epson 9880 Ultrachrome K3 been sitting a year and a half what are the odds of recovering the printhead?
Thank you very much for the info Sir, you're very customer-friendly.
Ultrasonic baths lead to depressurization of printheads! The bottom plate is peeled off from the print head!
We are using 75kHz ultrasonic tanks with controlled power output, and we run Epson heads at only 12.5W of sonic power. Combined with a higher frequency (75kHz is more than the standard 40kHz or 28kHz ultrasound) this makes the cleaning much safer for the print heads.
We have an Epson R1800 UV printer that has head clogging from UV ink, can the PHD 6 solve our problems?
- Emil
muy bueno esa lo venden? y funciona para cual quier cabezal?
Bro tú sabes donde la venden? Planes dame el link
Is this machine available for sale?
PHD3 is an old machine. We have newer models. Contact us: digitalsigntech.net/contact-us/
We have newer models, that work much better than the one on this video. Contact us on Whatsapp: +1-905-782-6274
How much for that equipment?
There are a few models of PHD machines you can use for Epson heads. Please contact us via email or Whatsapp: digitalsigntech.net/contact-us/
Do you have model for epson L800 , L1800 and other epson inkjet model
You can clean any Epson print head directly on a printer with our PHD-M machine, which starts at only $690. www.digitalsigntech.net/print-head-doctor-mobile.html
Is it possible to recover SPT 510 head with this machine
What is the ultrasonic damper plate made of? Is it available as separate spare?
hi
can you recover Epson 5113 heads?
Please can you recover my mimaki jv5-160s printhead for me?
With all of that work and labor, its probably more cost effective just to buy a new head because if the cleaning doesn't work then you wasted more money in ink than the head cost, and the head isn't the only part that messes up, you have a pump and then dampers. Those all contribute to clogging.
Di saya ada 4 biji dimna cara benerinya
Very nice idea dx5 printhead recover
hello how match full with the machine
How much is the kit?
Please my printer says "ERROR 53 HEAD HEIGHT ORIGIN" how can I solve this? Please help me
Where can I buy This Machine
How much is the machine?
Our prices are here: digitalsigntech.net/PrintHeadDoctor/
I need availability and price for
1. Print head for Epson Stylus pro 4400 p/n: F160010, DX5 Epson Water Print head urgently.
2. Epson color 900 Printhead p/n: F072000
Can you help to revert at the earliest and suggest when I can pick it up?
Thanks,
is there a website ?!? need trhat service !
www.PrintHeadDoctor.com
What is the price of machine? Please
Hi I want to clean it so can you please hel me out or can I purchase it
You can purchase it online at www.PrintHeadDoctor.com or by contacting us at support@solventcartridges.com
Where can I buy this device?
Bom dia. Voces tem cabeça dx5 subkimatica pra vender .. qual o preço?
I LOVE this
price please?
can you please take head servicing job . i will give you order
where i can buy recovery machine in nepal??????????????
You cannot buy our machines in Nepal, but you can buy directly from us in Canada and we'll ship it to you. Our contact details are on www.PrintHeadDoctor.com
DX5 print head recovery with print head doctor 3
this thing how much????
I in sabas....
Price please
If I need new print heads please send your contact
Hello ,i need this machine and your contact please, thank you
Where to buy this machine in vietnam
selling where
www.digitalsigntech.net/PrintHeadDoctor/ or Whatsapp +1-905-782-6274
All this mess confirms my idea that Epson printers are the most hideous crap ever designed and made. They waste litres of platinum-priced ink during their (short) lifespan and when their ill-designed printheads get clogged (every Tuesday) you have to run the gauntlet to fix them up or spend an arm and a leg for a new one (that eventually will get clogged anyway). Leave Epsons where they best belong: either on the shop shelves or at the recycling centre. They are a technological pest.
i use solvent ink
I have no idea.
สุดยอด
iu9i
55 the best st . 4r
55 the best st . 4r 9 9 4r5 5 we 4
55 the best st . 4r 9 9 4r5 5 we have 0t the 4 r
vc c
can repair to you my dx5 printhead how can i contact you to call
Our Whatsapp number is on this page: digitalsigntech.net/contact-us/
We don't repair DX5 print heads. We make machines for print head cleaning. Contact us on Whatsapp: +1-905-782-6274
Please my printer says "ERROR 53 HEAD HEIGHT ORIGIN" how can I solve this? Please help me
Hello ,i need this machine and your contact please, thank you