Cross Cut Sled | Multi Function | low cost 🤑
HTML-код
- Опубликовано: 21 сен 2024
- ⭐▶️ If you want to support my channel - please subscribe 🫶
I show the creation of my crosscut sled for the table saw - and what features I think are useful. This is not a step by step guide where I go into details. It is inspiration. ▶️▶️▶️ A video will follow with an extension for miter cuts and a flip stop block.
The cost was very low, as with all my projects. I used mostly wood scraps and only had to buy a birch plywood plate around € 10 with a thickness of 6 mm (size 100x60cm). I cut this in half, then made the millings and finally glued them to each other. This made milling easy and without the need for special cutters.
Screwing the fence in place took far longer than you can guess from the video. I also needed more than one hole/screw to do it. Aligning it to the saw blade with an angle was far too inaccurate, so I adjusted the fence using the 5-cut method. How this works, there are numerous instructions from other craftsmen.
▶️ If you like this video please give me a 👍 and leave a comment 💬
▶️ If you want to support my channel - please subscribe 🫶
Thanks for watching and all the best! ❤️
Mela
Keine Musik, kein Gequatsche, schön anzuschauen. Das gefällt mir! Ich bin zwar Elektroniker, habe aber vor ein paar Tagen eine Holzbearbeitungsmaschine (sägen, fräsen, hobeln) geerbt. Da werde ich mich so langsam mit Hilfe von solchen Videos einarbeiten. Ich habe festgestellt: wenn eine Maschine da ist, kommen Ideen, was man damit machen könnte, automatisch.
Wow..,very nice wood work bro.👍👍
Sehr schön gemacht klasse ohne diese machmal nervige und unsachlichen begleitet Kommentare grüße aus Spanien
I'd actually would like commentaries :D To each their own!
maybe he meant your explanations on the work in progress
Or maybe some detail posted in description, what wood, how thick, some measurements….? Just an idea to compromise perhaps
I came across your channel while looking for inspiration. I think the idea with the handles is brilliant. I will build it like this.
Also das mit den Löchern für die Hände zum Durchgreifen ist ja mal ne tolle Idee👍
Danke, schön, dass es dir aufgefallen ist. Ist einfach notwendig für kleinere Hände.
Very nice.
Bellissimo, anche se non ho visto bene come hai fatto le due guide in legno scuro x la slitta, anch’io ho lo stesso banco sega BOSCH GTS 10 XC e lo farò anch’io come anche la ZERO CLERANCE x maggior sicurezza🤗👍😉
Ciao, grazie mille! Il carrello scorrevole mi serviva talmente tanto che il video era un po' corto. Di solito mostro più dettagli. E sì, l'azzeramento è davvero utile e importante, devo assolutamente costruirlo al più presto 😉 Cordiali saluti, Mela
Bin begeistert vo deine Videos..ohne vü SchnickSchnack und Musik. Des gaunz mitfüma is sicher ur Zeitaufwendig. Sehr meditativ dir zuzuschaun! Danke moch weid so.
Schene Griaß aus NÖ
P.s. den Schiebeschlitten werd i ma nochbaun 😅
An scheen Donk! Zum Schiebeschlitten gibt's zwei Shorts mit nützlichen Erweiterungen!
@@MelaDIY hob i natürlich scho gseng! 🤣👍🏾
I have the same saw in South Africa. I see you've put plastic on the front, is that to improve the dust extraction?
Yes, exactly! The machine is quite dusty...