SMALL Cross-Cut Sled with ADJUSTABLE Fence, EXTENSION wing and BEVEL Feature!
HTML-код
- Опубликовано: 26 дек 2024
- Time for a new Cross Cut Sled!
My old sled was the best thing I ever built for my shop, but there was one big problem with it… it was too big! So I decided to create a smaller sled that has the ability to turn into a larger sled with an extension wing.
While I was at it, I decided to add a few more features, the ability to cut 45 degree bevels and an adjustable fence to cut any angle you need!
For the plans, check out my website - www.3x3custom....
More info on that awesome No Deflection Stop Block - bit.ly/3x3Stop...
Sign up for The Builders Challenge here - bit.ly/TheBuil...
____
MATERIALS FROM WOODCRAFT
Baltic Birch Plywood:
bit.ly/BalticB...
T-Tracks:
bit.ly/48inchT...
Jig Hardware Kit:
bit.ly/MustHav...
Hold Downs:
bit.ly/LargeHo...
TOOLS FROM WOODCRAFT
Ryoba Saw:
bit.ly/Japanes...
Triton Router:
bit.ly/TritonP...
AMAZON (affiliate) LINKS
Table Saw:
amzn.to/3bKEoRU
Triton Tracksaw:
amzn.to/3bK9rNL
Makita Trim Router:
amzn.to/2Yg8zfN
HDPE for runners:
amzn.to/35iTwDJ
Calipers:
amzn.to/3bPvVNb
Really Thin Double Sided Tape:
amzn.to/35icHO7
5 Minute Epoxy:
amzn.to/2y2H9Q9
Red Triangle:
amzn.to/3aSVv2x
Red Square:
amzn.to/2VLUllo
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Very Smart design! nice work
Thanks so much Izzy! It’s so fun to come up with this stuff. Ha
The lady is the Jig Whisperer.
@@kperellie "Nah, na na na nah. Here comes the jig-masta, murderer!"
Well, if you had any doubts about this sled, that comment probably erased them!
you got grear ideas as well
I just had my niece over my shop she’s 19 and has bad anxiety. I was trying to explain to her that woodworking and welding and all those things are not just for guys. I’m really trying to get her into finding a hobby with her hands. That being said, I am going to share this channel with her because this woman is amazing. Personally, I think it’s the best video I’ve seen on cross cut sleds .
Sorry to hear she's struggling with anxiety. Hope it pans out for her. I kinda get anxiety running my table saw it's old and likes throwing wood and kicking back. Hence why I'm here. 😂
@@armstrong2052 make your self a cross cut sled! Never do a cross cut without one! I I learned that the hard way. I had to kick back really bad one time and it bruised my stomach for like two weeks. Good luck with the anxiety and with the cross cut. Stay safe you only get 10 fingers. Try to keep them. Lol.
Thats a horrible thing to say. You are a monster
As a person who has suffered anxiety and depression for many many years I can share with you that woodworking is something I found to help me immensely, I started as covid did and have never looked back. I’ve taught myself, made lots of mistakes had lots of small accidents but keep on going. I hope your nice niece (it’s what my aunty calls me) finds her way and I wish you both good luck and lots of fun
@@expatmoose thank you and good luck to you! I wish everybody on the planet could have inner peace.
So nice to see a beautiful woman on the internet who is captivating, educating and loaded with followers, WITHOUT wearing skimpy clothing. Hats off to you and thank you for showing us all of your brilliant ideas. You are literally saving fingers here.
Saw this comment last night and been stewing on it. It aint any of your business what she wears pal. She does make great videos. Correct. End of story. The clothing (outside of safety) has nothing to do with the woodworking, same with her looks.
I imagine you are just trying to say a nice thing, but if you take that line of thinking further then you’re a man (presumably) telling a woman what she should and shouldn’t wear, in the context of a crosscut sled build. Not trying to be angry youtube guy, just trying to point out that your comment is a little bit Handsmaids Tale-ish.
Just began assembling materials for this awesome multifunctional cross-cut sled. At 82, I have built several and this is the best multifunctional design I have ever seen. It will grace my shop shortly.
Agreed that this video is awesome! (new subscriber). I'm 55 and am very much the woodworking novice. I thought that I got into this game way too late, but not anymore. Just to let you know that those two little words of yours, "...at 82..." have helped my confidence. Thank you.
@@MalcolmandStacey Never too late to learn. I learn something new every day. I'll only quit when I am dead. (I think)
Mech Engr/ machine designer and builder here- You have the best, most well thought-out cross cut sled on RUclips. Thank you very much.
I love it when she makes a test cut for square and says "That's square enough for me". I've been a cabinetmaker for 16 years and I find that a lot of woodworkers over think. You are not splitting the atom...it's a blanket box. If it's out a 1/16” , crack a beer. Enjoy. Job well done! I think I'll use some ideas for my next sled
Hah! Yeah. When I first started out. Chasing square was the bane of my existence. I’ve since relaxed my tolerances and my work is actually better.
If you're not worried about precision, what's the point of building a sled anyway? Just use the miter guage then. The whole point of building and using a sled this awesome is so that you can make precision cuts and elevate your craftsmanship.
@@bobhenry8262 for starters, you don't hve to worry about tiny offcuts. I'm in the relatively newbacious category but I had to make a bunch of tiny offcuts recently and it was then I knew I needed a sled. Any sled would be better than what I have. So there you go, a reason for having a sled even if it doesn't improve your accuracy. Now hopefully I didn't same something blatantly clueless lol
Women like this should be held up as role models instead of movie stars.
Amazing talent, skills, and intelligence!
☺️
I watched this when she first posted the video. I was in poor health and kept it in my favorites. I’m better now and ready to get going on my workshop. I am more impressed now than when I first watched it. This lady is a genius. Just amazing!
THANK YOU SO MUCH, Tamar, for sharing your skills, experience, know-how, innovation, and just plain hard work with us! You are my NEW INSPIRATION!
My first saw was a jigsaw, but it wasn't enough to satisfy my fascination with wood, especially after watching shows like This Old House and The New Yankee Workshop back in the late 90's. I was fascinated with angles and bevels (still am), and wanted to do so much more (still do).
My woodworking hobby started back in 2000 - I bought a table saw, miter saw, plunge router...and dabbled at some projects. Over the years, I have built a floor-to-ceiling wall unit for my family room, a desk for a friend, an art station for myself, and numerous other projects, besides doing many home improvement projects.
But now that I am newly RETIRED, I am turning the end of my garage into my "perfect" workshop - perfect for me, anyway. As a 4 foot 11 inch woman, I have to be creative in order to keep SAFETY in mind (like storing my wood stock low rather than where it is now - up on shelves).
Anyway, I am DELIGHTED to have found your videos, for you explain things so well and clearly, along with the many helpful links. Your innovation sense and enthusiasm are catchy - they get me thinking about the things I want to make, and the many JIGS I can't wait to build (you are so adept at coming up with jigs that are masterpieces of design and function!). I also am purchasing many of the tools you use and recommend, for as we all know, there's a right tool for every job. I too think the stop from Jonathan Katz-Moses is AWESOME!!!
Please know that I now end my day by watching at least one, if not more, of your videos, and am taking notes on all of the neat techniques I am learning. So THANK YOU AGAIN! I hope every WOMAN within the reach of the Internet watches your videos to LEARN AND APPRECIATE that they, too, can DESIGN - BUILD - CREATE - INSPIRE.
I've only seen a thousand sled videos. THIS is the one I'm going to use to make my sled. Thank you!
Awesome! Good luck with it!
Yea I downloaded the Kings mini sled plans, but changed my mind, I think this one is better. Custom made for Dewalt too haha ;) I think I will however make a longer "safety box" in the back of the sled, like the King's version
. Just 1.5" deep makes me nervous.
I have seen a thousand and 1 sled videos and I too like this one!
Agreed! Best sled video out there!
@@3x3CustomTamar there is a problem I'm in the uk wood is expensive and we don't have all tools
You're videos are quickly becoming "must watch first" in my RUclips rotation. All your projects are well thought-out and wonderfully designed. But, even more so, your clear step-by-step video tutorials are a wonderful follow. Keep em coming and I'll keep watching. Haha
That’s so awesome to hear. Thanks so much! I’m so happy you like the videos
Agreed!
I love this kind of thing, but nothing is nicer than pure, beautifully and economically explained cleverness. I'm having trouble sleeping at the moment, the bad things some people do when making videos like these keep me awake. I stop autoplay, so I can watch them again as the sun rises upon a new day.
3x3Custom - Tamar
P
I’m new to woodworking and just got a new (my first) table saw. I’ve been stalking the RUclips channels for a crosscut sled that will not overwhelm my small garage shop but still have a wealth of capabilities. Yours checks all the boxes. I especially like the single HDPE runner and lightened beds. Love your clear (no hemming and ‘uh-ing’) presentation and perfect video capture. Great info, no extra fluff. Gonna build it, thanks. Hart
27 year aircraft mechanic, trying to get better with wood working great video and your sleds the winner. love your humble attitude and attitude :) thanks for making this !!
Awesome
I would literally buy this if I saw it for sale. Perfect design.
I looked at a lot of sled builds, but yours had so many mitering features it stood out above them all. I built one inspired by your build. It came out very nice. Thanks for the inspiration.
Awesome
Absolutely incredible! I can't wait to build this sled. I've watched a million crosscut sled videos and this is far and away the most impressive. Nice work!!
Awesome
Woodworking would be a great avenue for your niece-back in college days I was a highly ranked tennis player, and I remember being inspired by Martina Navratilova saying how proud she was for a couple of furniture projects she had done and her ‘basic’ woodworking skills
Thanks for the great video. I am a new viewer and have really enjoyed watching.
I think the reason you had difficulty with the back fence was that you added a second set of threaded inserts into the two oak back rails. This acts to deflect the two surfaces by however much error in clocking exists between the two joined threaded inserts, rather than tightening them together. For a 1/4-20 fastener, this can be as much as 0.050", nearly 1/16" (or zero if they are clocked just right.) If you used clearance holes into the oak pieces, the alignment of the extension rail to the primary rail should be much better, because the pieces would be pulled together. Still, really great video, thanks for the effort!
That's funny, I was just watching the video for the first time and got through the first 12 minutes and saw that issue and jumped to the comments to see if it was fixed. I guess not. I have run into this issue many times with other peoples work. You can only have one tightening surface. Even if they are clocked right it isn't going to tighten which is why your clearance idea makes the most sense.
It's still a great fence. I made a Dado fence literally just two days ago and now I'm wondering if I should have just used my Router. Oh well, the fence is created, but I haven't made a nice custom Fence like this one. Quite a lot of these features will be in mine. Great job!
Woah this is phenomenal. I didn’t really believe that’d you’d get such tight 45s off the bat, that’s killer.
Thanks! Yeah! I’m so happy I have that capability now
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ruclips.net/user/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
I've been a cabinet maker/carpenter for nearly 3 decades and that is by far the best saw sled I've seen great design thanks
Awesome to hear
First time viewer and impressed with your skill. No BS, No T&A thumbnails, just skill. Subbed
🤘
Great design! I made mine a bit bigger for my cabinet saw. I also added T-track on top of the miter angle option. Now I can add a couple of hold downs, one for a stop and one or two for the workpiece. I also added a very shallow dado on the main fence for a sticky back rule to reference the stop for perfect length repeatability. Keep up the great work!
Would you mind sharing the dimensions of your larger sled? Am thinking of building this curious as to how it stands up when made bigger. Cheers
Great video. Love how you clearly explain each step. I'm a rookie woodworker and I have been watching videos about making Cross-Cut sleds. Your design has made it to the top of my list. Thank you for also posting links to most (all) of the tools, material needed to create your cross-cut sled. Thanks for making this great video. You also have a new subscriber.
So glad you liked it!
Superb example of how all RUclips tutorials should be created.
First class!
Awesome to hear
Omgosh, i just love her expressive hands marking straight and aligned elements! Good job!
Best crosscut sled I've seen--and I've seen a lot.
That's soo true,never seen one soo... Fancy and DIY.
This girl ROCKS!!!! Wish I was that knowledgeable and gifted. One of the few channels I have subscribed to
😊
Thank you for all the videos and information. I just finished my first crosscut sled with my 16yo son who's enjoying woodworking. They say it takes great intelligence to explain things in simple ways. Thank you!
This is the best sled build that I've seen (lots of options too). You're a first class carpenter and video presenter. Thanks for posting.
Awesome to hear. Thanks!
THIS IS BRILLIANT! I love the fact that you can use it in two positions for bevels or miters.
Thanks! I always wanted to make a dedicated sled for bevels. Then I thought why not put it in the same sled. Ha
@@3x3CustomTamar
.
SEAOONS GREETINGS AND HUGE THANKS FROM AN 82 YR OLD BEGINNER
Very clever sled! First time I am seeing your channel, I am going to check out some more of your content. It's nice to see a female bringing it in a male dominated hobby. If you make another sled extension, you may find dowels excellent for strength and repeated alignment vs biscuits.
This is one of the coolest and best designed cross cut sleds I have ever seen. Very nice work.
Wow, thanks! Glad you like it!
Really nice sled, and finally, I see one with the T-track for a stop.
I am really impressed with this design.
A little food for thought on your extension, and primarily the spline.
The biscuits are brilliant
Extending the T-track across in the dato is brilliant.
The spline, as you mentioned could have been a single, however, I would have made it wider.
When you used those 1/4-20 T-bolts, you took away most of the strength they had, even collectively. I'm sure you are getting a pretty big stress riser right where the holes are, but as it is, that really shouldn't see much stress. IF you do see that spring at all, I can pretty much guarantee that is why
Also, a threaded insert mated to a threaded insert typically doesn't work out that well. I'm glad it did for you.
When I make a joint like that (Typically in metal) I will use the single threaded insert (Usually a Keensert or Helicoil), a bushing for a through hole, and a shoulder screw..which of course complicates things tremendously, but now you are sure to get the spline to clamp tightly against the fence.
I also absolutely LOVE the Bevel feature you have introduced here. I have been toying around with some similar ideas as well. I like the 2 track method, I have been wrapped around idea of an axle...probably a shoulder screw, bushing and threaded insert.......
Once again, my hat is off to you. You have some serious smarts as well as talent here!!
EDIT: The Bevel I was referring to above is really the Tapered Fence feature.
The Bevel is ALSO genious. My current sled has three or four Kerfs. One at zero, one at 22.5, one at 30, one at 45 lol
I have the same saw you have, so this should go a long ways in helping me.
Wow - fantastic sled, and great video explaining the rationale for every decision. 4 years later and I agree with other posters - still the best sled video on YT!
So glad I waited to build my own cross-cut sled. Definitely doing this one!
Awesome! Good luck with it!
Sorry I'm late to the party. This is so incredible T! Thank you so much for using my stop. i am so happy it is treating you right!
Best stop out there!
I built Tamar's sled and used your stop! Great combo! My two favorite wood working video producers!
Agree with Doug's comment. I'm new to woodworking Tamar's solitaire board was my first project though watching videos for last 12months.
Question about sled accuracy. What is acceptable, or more so, what's acceptable for say an end grain chopping board when you have lots of cuts and glue-ups? Katz has an amazing 3D chopping board I imaging accuracy is key here. But how worried should you (I) be about this? Thanks in advance.
@@gsallis85 I make end grain cutting boards and the crosscut sled does not play a big role. You need a very good saw plus fence and then a very good planer.
@@gsallis85 I should have added that you need a micrometer and something to set your blade angle precisely (I use the Wixley gauge). I can share more insight and examples if you wish.
Always great to watch your thought process.You are the jig queen.Invent one!
You will live long and prosper.
Haha! Thanks so much!
Hey Tamar. Quick Thank You note. I'm a relatively new woodworker and stumbled across this in a search for cross-cut sleds, then dove into your other videos. You do an excellent job of clearly explaining projects (with plans and tool lists, too), including woodshop essentials like this one. And you don't lard your videos with headbanger music in the background, which is greatly appreciated. Thanks for your work!
Awesome to hear! Thanks!
"I help my mom, Tamar, a lot. I am her doter
Haha! She loves coloring on my tables ☺️☺️
This is hands down the smartest yet simple cross-cut sled I've ever seen! I am loving your channel as I found it just yesterday! Consider me a new fan! Looking forward to learning a lot of cool things from you :)
Awesome to hear!
"if i had a biscuit joiner id use that... " Then proceeds to make biscuit joints.
Totally awesome.
Hahaha! Use what you got!
I found this video after watching Jonathan Katz-Moses's video where he mentioned it. I'm glad I found it. I for one can really appreciate the fact you are doing all of this work without all the fancy top of the line tools (like Jonathan Katz-Moses) and are using the same tools I have in my shop. You are also quite gifted at explaining things in a way that is easy to understand. It's also an amazing design that I will work my own version of soon. I will say that when I saw what you did with your little router jig, my eyes almost popped out of my head. I was quite puzzled by the piano hinge until I saw you use it. Thank you for the post and I will be watching plenty more of your work from now on.
Awesome to hear! Thanks!
I hope that your husband understands just how fortunate he is!
I just made sure to tell him 😉
"...and then you lock it down"
Love it!
I had to watch this again last night because I've finally got around to making a nice one.
simplemente EXCELENTE!!!
saludos desde Argentina
I don’t know why the RUclips algorithm has taken so long to include your videos on my feed, but I’m glad it has because the content is exactly what I’m looking for. Thank you 🙏
Haha glad you found me!
This is the best design I’ve ever seen! I will post a video about my crosscut sled soon. But it is verry bassic compared to yours. Keep up the good work love your builds!
Thanks! That’s so awesome to hear! There’s nothing wrong with basic. Ha
3x3Custom - Tamar my simple version of my crosscut sled is online you can watch it on my channel. Sorry for the bad audio
I like how you "level" a straight edge.....LOL. Thank you for the excellent video!
Haha! Thanks!
That router guide is a great idea, I'll be making one of those :)
It’s one of my favorite jigs for sure
Do you have a template for the router guide?
BRIAN SHANAHAN no template. But a video on how to make it
@@3x3CustomTamar Thanks so much....saw the link.
I have to admit I would have never watched your videos. But two of your coworkers maybe bragged on you. Saying great things. I'm so glad I did. I really enjoyed watching you. You all are so talented. Thanks for making them!
Haha glad you gave in
Awesome sled. I’m definitely making one. Also love that jig for the router. Do you have video for that?
Awesome! Have fun with it! Yup! I added the link on that little “i” that’s in the top right hand corner of the video
The holes in the oak extension pieces should not have threaded inserts as they will not be able to pull down tight properly... drill them out to the clearance size of the threaded knob (M8 ? 5/16" nc ? )
Great jig... 😉
😎👍☘🍺
They seem to be pulling down right properly.
@@3x3CustomTamar as long as they are tight together when you start they should stay that way. With your t-track and "biscuits" you're going to be aligned.
Frank DeRosa it’s just extra precaution to stay square. Yeah. That’s how I’ve been installing it. Make sure the oak is flush to the ply and tighten down. My thought process was that stacking them would act as if they were one threaded insert instead of two and the alignment would always be spot on
@@3x3CustomTamar I would ask you to visualise this... screw 2 inserts on a knob with a 1/8" or so gap between them, grip them in your hand and screw in the knob... once the knob bottoms out onto the top insert it will feel tight ... but you will still have that 1/8" gap... hard to explain in words but I hope you get the point I'm trying to make (poorly🙄)
And yes, you are correct they will act as one nut but this " long nut " will be bridging both jig pieces, not what you want if you want to tighten one against the other....
I'm a retired engineer btw so I have some experience here... 😉
Of course if you are happy with your setup ignore my comment and carry on... as long as it works for ya, thats all that matters ...
😎👍☘🍺
Peter Fitzpatrick I totally get what you’re saying. But since I make sure the oak is flush on the ply before screwing in the knobs it’s been working fine!
For bevel cuts with the extension arm in, I’d start to obsess over getting my support table on the same plane as the saw table..
Me encantó tu diseño lo adaptaré al mío gracias
This is clearly the best informational and educational video for a smaller fully functional table saw sled EVER!!!
Awesome to hear
Perfect ❤️
Wow, I’ve been watching loads of videos on these sleds and this is defo the one I’m going to make. Just a quick question Tamar, I will be cutting a lot of 10” timber, would this design work if I just made the whole thing deeper? Many thanks for the brilliant video. 👍🏻👍🏻👍🏻👍🏻
Anyone else have a heart attack every time she's checking the router bit height with her finger and you hear the lift motor turn on?
Woodworking looks very dangerous to people who beleive in ghosts.
Haha! It sounds scary when it’s sped up!
I don't think I've ever commented on a RUclips video before but I bought your plans, made the sled and can I just tell you how freaking brilliant it is?!?! I made some tiny modifications in order to use it on my Milwaukee M18 table saw, but it is f'ing amazing. I've made a sled in the past for a much bigger saw, but this is so far beyond amazing in its versatility and modular capabilities. THANK YOU!!!!!!!
a really good looking sled....I will take some inspiration from it.
One thing I think might warrant changing is having the inserts on the oak battens on the extension. Once the locking rod engages in the "oak" insert, it will hold the oak away form the insert on the main fence. An oversized hole will allow the nut to pinch the two parts together.
Not only is this a brilliant design, if I went out to buy a sled, this is the level of quality you would hope it was made to. Thank you!!!
Glad you like it!
Looks great. Love to see a sled video that focuses on 8-1/4" job site/hobby saws that offers multi-functionality similar to this sled. Small 10" table saws seem to be the new norm.
I built your sled. As a woodworker with arthritis and neuropathic arm and hand pain, limiting my lifting capabilities, this design is perfect; easy to lift on and off the table. I also bought K-M's stop and put an Inca t-slot/ruler bar on the top. Thanks again, Tamar.
Awesome
I downloaded the plans and completed this sled today as we are in lockdown here in Melbourne, Australia. Tamara has designed a well thought out and useful woodworking tool. I can not thank you enough. All the best. Walt
So awesome to hear! Sorry about the lockdown though…
That end with the 45 degree cut is freakin genius!! Middle gives you 90, end gives you 45. Brilliant!
Glad you like it!
I have seen 30 or so tablesaw sled DIYs but, I’m sold on yours. I love both the size and versatility. Thank you for sharing.
What a great video. You clearly are an accomplished woodworker. Your ideas are well thought out & give great tips to this woodworker of 58 yrs of experience. Thanks!
As a total noobie my head is nearly spinning with how complex this seems, but that would be amazing to build something like this down the road. I'm sure it makes your work so much more efficient and accurate. Thank you for sharing it, I still really enjoyed watching a master at work.
Glad you liked it!
Nice job. I'm retiring end of February, 40yrs Union Sheetmetal Worker/Fabricator/welder, and setting up a woodshop/metal shop. Going to get creative, have fun, and make some money. This will be a sled I make. Thank you 👍
I recently purchased a job-site table saw to take care of some construction projects around the house, and the miter gauge that came with it is garbage. I was about to go spend a couple hundred bucks on a good miter gauge, but after watching your video it seems pretty clear that I don't need to! As others have stated, yours is the best design I've come across so far, and I'll be building one very soon. Many thanks for the excellent design!
Have fun with it!
...and the award goes to...Tamar for best video production, best presentation, best audio, best tips, ...just my new GURU! Merry Christmas, and all the other holiday salutations to you and yours!
Haha so awesome to hear! Thanks! Where do I pick up my award though?!
Es ist unglaublich welches Talent sie haben und die Präzision mit der sie Dinge ausführen selten so etwas vor der Kamera gesehen fantastisch
This is the best sled “how to” I have seen yet. This one makes so much sense!
I also appreciate how you fast forward so much for each step and don’t drag the video out 👏🏼
A while back I gave the video a thumbs up, today I bought plan. Nine pages in the plan and it is very nicely organized, Thank You!
So awesome to hear! Thanks!
Came across your videos and I love your work. Upgraded my shop saw yesterday and after seeing your sled I knew that's exactly the next sled for me. Hanging the old one on the wall as a piece of art/shes ready to retire. My very first RUclips purchase! Awesome sled, keep up the great videos!!! (also only 5 bucks for the plans! You are the best)
Great to hear!
This has got to be one of the best sleds I’ve seen on RUclips, think I’ll finally build a new sled, thnx
This lady is awesome. Knowledgeable and good presenter. Thanks.
I like that sled a lot. I have a suggestion when you attach your extension on the back put them far enough to get your angle stop bar in between them and put screw inserts in to hold it in place. That way they would be handy and you would know where they are.
This is quite possibly the most well thought out and FUNCTIONAL crosscut asked I have EVER seen!!! WELL DONE!!!!!!
Awesome to hear! Thanks!
its beautiful to see a beautiful woman that knows her wood working so well
Just finished making this sled. It is GREAT! Much better than the clunker I had. Thank you, thank you. No excuses now for my wife's jewelry box. lol
Great to hear!
I've been watching a few videos on how to build a cross cut sled for myself, and this is by far the best one I've seen
Wow, thanks!
I just bought a DeWalt 54 volt table saw and have watched quite a few sled videos and this is by far the best.
Love it
Wow, thanks!
So a year and a half later, you mentioned in your Q&A video how your table saw is no longer made. I have a DeWalt saw that I just bought and the measurements between the blade and the miter slots is likely a bit different, such that my sled was too narrow to use on left side for 45 degree bevels. But not to worry. While I sat down with graph paper and pencil to adapt this design from scratch, while I was waiting for new T-Track to arrive, I decided to try and salvage this one. Using biscuits, I widened the sled base and fence to accommodate the wider dimension between the miter tracks and everything should be fine. Live and learn, and I enjoyed the critical thinking it took to troubleshoot the issue as I’m getting to know my tools better. Thanks for the inspiration.
Sounds like a good fix!
This is a wonderful sled. The single track for bevels is exactly what I need.
Sleds are the most customizable accessory. Love it
Glad you liked it!
Cześć 🙂
Podziwiam inwencję i pomysłowość Szanownej Pani.
Bardzo przyjemnie się ogląda.
Pozdrawiam z Polski.
Thanks for linking all the stuff below. It's nice to know where to get t-track. It seems like an excellent accurate fence is the base/root to table saw success.
You have/use great wood working skills and speak very clearly which makes it easier for people to understand and follow. keep up the great videos.
Грамотно продуманно функционально.радует что у людей еще есть в голове мозги.
After watching several videos of sled builds for this size saw, yours is my favorite! Thank you so much!
Awesome to hear!
I’ve been a subscriber of yours for years but just watched this video. Built one today and must say it’s my new favorite! I have a stack of sleds and this one will replace at least 3 of them. Great work as usual.
That's an outstanding sled. The only things I can see would be a nice add-on would be an attachable jig for doing finger joints and an adjustable blade opening for using dado blade sets.
I like this sled, and I like that you are using tools that I can afford ...big plus
I am always impress to see women handking themselves in an occupation that was predominantly men. You did a excellent job here madam. I am now learning wood work and watching you was great inspirarion.
I've looked at plenty, but this one looks like the best. Love the multi-function capabilities, and the ability to have a miter jig on the same base. Brilliant. I like to make boxes, and what sold me is (not shown) the ability to flip stock to the other face at the angled edge, and put a spline groove in the angled box side/end. I've looked at all sorts of spline sleds to hold box sides that have an angle cut. But, here's a fully controllable solution that adds one more functionality to an already brilliant design. Thanks for this.
Awesome to hear!
I've watched a lot of "build a sled" videos and this is the one I'm going to follow. So many features!
Impressive….. I like how she checks her work…. A true pro!
I have built large sleds and small sleds, but nothing this nice. I need to do a bunch of exact angles. It is time to step up my game, so I downloaded you plans and I purchased two of the stop blocks from your store. Here we go!!!
Just finished my sled based on your design. Aligned to .005” using the 5 point method. Love your videos, your designs are so smart!