Focus ST cp-e Cold Air Intake Kit With SynoilD/DFlow Filter 2013-2014 Installation
HTML-код
- Опубликовано: 6 окт 2024
- Bill shows you how to install a cp-e Cold Air Intake Kit with a SynoilD/DFlow Filter on your 2013-2014 Focus ST.
Purchase Product Here:
SynoilD:
www.cjponyparts...
DFlow:
www.cjponyparts...
Increase both the performance and the aesthetics for your Focus ST's engine bay with this brilliant Cold Air Intake Kit from cp-e.
Improving the intake system on your 2013-2014 Focus ST will exceptionally upgrade your driving experience. Including all the necessary hardware, this incredible cp-e kit also has a 4" SynoilD/DFlow air filter, mandrel bent tubing, eighteen gauge stainless steel intake box, distinguished custom coloring and more!
Get the maximum amount of air to your turbo and achieve a superior power that you'd never experience with standard cold air intakes!
Check out more Focus ST parts from CJ's here:
www.cjponyparts...
Check out more cp-e parts from CJ's here:
www.cjponyparts...
Subscribe to CJ Pony Parts on RUclips here:
www.youtube.com...
Hey guys, I just wanted to make a quick suggestion. Rather than pulling the cowel to access the turbo couplet, I found it was way easier to undo the clips on the radiator overflow jug and just set that off to the side. It really opens up your acess to the turbo.
Looks like the most complicated CAI install out there, but also looks like the highest quality setup. I love that it draws cold air through the factory intake duct up front.
Great video! Your installation videos are very descriptive and very well done overall. I don't own a Mustang, yet I watch a ton of your videos due to the high quality of work!
On the pcv hose do you use other plastic on other side not the engine side you removed but I am confused does the hose just go in intake please respond I plan on doing this and it looks fairly easy except I didn't see what you put in the intake did you other plastic from original.
My “short air duct from the factory box” will not stay in place. It slides into the air box even when I readjust it. This leaves a huge gap. Any thoughts?
As usual, amazing video, quick question, is that the stock B.O.V? Or do you have an after market one installed?
that sounds like the stock bov I just did mine today and it sounds just like that
Doing one of these to my 2013 escape titanium believe its this brand same engine minor adjustments needed
Update? What mods?
@@wayneholderbee1734 it fit and runs well nice turbo noise now
Which focus is best focus?
*B O X*
Ehh too much work. Stock one is just fine attracts less heat since is plastic material. Just open up the original box and get a k&N filter.
does the stock air filter still fit with this metal airbox or do you have to use cpe's? is there another filter that would fit this airbox and is red in color?
Doesn’t let buy it because CARB in California and when I try buying the correct one for California there’s no shipping options 💔
Paul Cruz
There has to be some way around it . Cal-EPA has got to go , 91 Octane gas sucks along with the price
Paul Cruz
You will have to have it sent to a friend or family member out of state and when they get it they mail it to you. Remember to use “never seize” on assembly in case you need to put it back on like for a smog check or when you sell it
California sucks dude.... move.
I see that in the description that this is for a 2013-2014. I have a 2015 (65) plate st-3. I know that under the hood they are morealess the same if not the same so would this fit one a 2015 model. Also would this void the warranty as I still have a year left on it but would like to get this kit. Much appreciated if you could get back to me on this one
I noticed that the map sensors are different on the 2014 from the 2017 is there something like an adapter I can use to make it work?
Is this the same install on a 2016?
Will this give me a check engine light?
How do I take the box out because it’s not screwed down in the back left and back right it’s like clamped or something and I don’t want to break it
Nvm I just yanked it off
throw a check engine light?
Can I get just the Air Box?
We only offer the complete kit
My question is how do you calibrate the wipers back on cause now my wipers hit each other lol
This is easy. So don’t put the wipers on and turn on the car. The motor will go back to where it used to be. Then just add the wipers and it should not cause a problem.
@@jayvin_2169 thanks i figured it out lol but appreciate it anyways
@@Mando.50959 I’m glad you fixed it even though I was no help 😂
@@jayvin_2169 its all good still appreciate it lol
Bruh this back being on back order is killing me
Cody Bunton any idea how long is it going to take? I just ordered mine today.
will this work also on the Focus ST 2012. 2.0l ecoboost
Will this void the warranty?
Motorhead883_ warranties are only voided if a mod causes a problem. If this intake were to cause a problem you had to take it to a dealer to fix, they’ll charge you because the warranty was voided by it. But, if say I install a new exhaust, then a week later my syncros go out, the syncros are covered under warranty
Can I buy just the box? (Where the filter goes) if I can can you send me a link please!!!!
We offer the entire kit only, why not get the whole kit?
CJ Pony Parts because a guy sold me his injen intake cheap! And with the box I can get more air coming from the front Bumper
Do you ship this to the U.K.? If so I’ll take one 😂
Yes we do, there are shipping options on our website!
CJ Pony Parts I’ll head on over 👍
Do the same intake for a fiesta st
No this is Focus ST specific.
CJ Pony Parts there is one for the fiesta st saw it on whoosh Motorsports
@@evilphantom9824 Sorry I misread your comment, I thought you were asking if this one fits the Fiesta.
CJ Pony Parts oh it’s fine. Just haven’t seen an install of this intake for a fiesta.
Great video but it could be even greater without that irritating music.
Does it fit the 2018?
No it will not since Ford made some changes We offer several kits for the 2018 on our web page
@@cjponyparts wait, I just bought this and the website says it's for up to 2018?
@@jamesbronson4293 did it fit?
That looks like a huge pain for an intake