thank you very much this will help i need to do the drivers side on my tuscon n this bein for the same year hyundai should be the same process , thanks
Mine didn't work the first time found that if I pressed on the big resistor next to the plug with 2 wires it would come on. Took it back to the bench and soldered that resistor again and it worked great.
Thanks this saved me some money. Fixed both taillights
Great to hear!
Fixed it!! Thanks. Small tip: I used an oscillating saw to cut out the hole. It worked great.
That would make a cleaner cut (I don't have one). Glad I could help
Thank you very much for this video! I was able to repair both sides because of you!
glad I could help
thank you very much this will help i need to do the drivers side on my tuscon n this bein for the same year hyundai should be the same process , thanks
No problem 👍
I fixed the round light but I couldn’t the little side marker …. Any way I’m happy with the results ….thanks for the video
Glad it helped
Mine didn't work the first time found that if I pressed on the big resistor next to the plug with 2 wires it would come on. Took it back to the bench and soldered that resistor again and it worked great.
hi is it also possible to buy a new board my soldering skills suck
if you find the circuit board number you can try and do a search for it, you might get lucky
Thank you so much !!!
You're welcome!
Is there a unit that can replace this after market if so any suggestions?
you can try www.vland-official.com
Forget that buy a new one.
new one was over $400. or buy a pair of after market for about the same