Can you provide a link to the wiring loom/wiring harness that can provide the three light functions (white/red accent/brake -strobe/solid red), for my pair or CR1 Pods. I have a UK Ford Ranger! Thanks in advance.
We have not had the chance to confirm fitment with our UK friends yet. However, you are more than welcome to try it out! I'll send you the link to the kit: www.diodedynamics.com/hitchmount-led-pod-reverse-kit.html (Be sure to select C1R +Brake to get all the functions you are asking for!)
@@diodedynamics think I will use the Trigger 1 wire on my Switch-Pros 9100 to provide the Brake function and introduce that signal trigger into the harness fed to the two C1Rs
Can you please provide a link to order just the wiring harness for these? The wiring harness that plugs into the existing 7-pin trailer connection please. I have the complete kit, brackets and LED pods but can’t find the wiring harness for it.
Hey there! Here is the link for our Dual-output harness with a 7-pin in-line: www.diodedynamics.com/stage-series-7-pin-dual-output-trailer-wiring-harness.html If you have our C1R pods, here is the link to the harness for those: www.diodedynamics.com/stage-series-c1r-7-pin-dual-output-trailer-wiring-harness.html
What size is the bolt that attaches the light to the small triangle bracket. The one with the nyloc nut and Allen head? Both my bolts snapped during installation.
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that.
had you kit for 2weeks now and still can get the time to install it.either its raining(alot)or scorthing hot or both but will send a little vid when ever i do get it install
I would love to see you manufacture a rear “fog” version of this or the hitch light. If you google Audi Q5 rear fog lights you’ll see what I mean. So basically it would always be in bright mode. When put in reverse, it would switch to backup light. Thanks
We can look into that for future products! We do offer replacement lenses as well, so you can always make that switch yourself in under 5 minutes! Here is the link to our replacement lenses: www.diodedynamics.com/clear-lens-for-stage-series-c1-pods-one.html
I have just purchased this along with the hitch mount light. I didn't think this thru, but can I connect both light kits? I don't see it possible. Piggy back, if so, then one plug-ins on the harness would be left out, right? Please advise. Thank you
Absolutely! You shouldn't have any power draw issues if you piggyback the harnesses together. We have employees here that run the same setup flawlessly!
With only having a single output light, this kit has no way to have turn signal options. The Opt7 tailgate bar is a goo option for extra turn signals. We do offer a much brighter option for your factory turn signals as well! Check them out in the link below: www.diodedynamics.com/led-bulbs/turn-signal-and-switchback.html
My C1R light will not strobe when I press the brakes. I bought the product from a vendor of yours. The purple wire is intact/connected. The vendor requested DD to send me a new harness. I installed said harness and the lights still will not strobe. On the box for my lights, it says Stage Series C1 lights, but the scan label says C1R. Can you please assist and help me troubleshoot?
Hey there! Sorry to hear about that! Please go ahead and give us a call at 314-205-3033, Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that. Hours: Monday-Friday 10 a.m. - 5 p.m. CST Email: contact@diodedynamics.com Phone: 314-205-3033
If you are looking for manual functionality, take a look at our universal reverse light wiring kit! I'll link the product below. Additionally, we have not had any reports of the newer Rams throwing codes with the HitchMount installed! www.diodedynamics.com/reverse-light-wiring-kit-w-running-light.html
Great question! Since this kit is mounted on the inward side of the dual rear exhaust, this kit should not interfere with the drop down bumper step included on some models!
@@diodedynamics the trucks with the Multifunction tailgate have a step on the inboard side of the dual exhaust…seemingly right where the light is. Some models without the MFTG have a step on the outside corner of the driver side, which would definitely not interfere.
@@tjkoen01 After checking, you are correct! We apologize for the confusion. The reverse light kit may not work for that model. Unfortunately, we have not had a Ram in that trim in our engineering garage for testing yet. We can definitely pass that along and work on another option in the future! Stay tuned!
Did you purchase the SSC1 pod or the C1R pods? If you ordered the C1R pods, and they are not strobing, please go ahead and give our customer service team a call and they'll be happy to help you with that! Hours: Monday-Friday 10 a.m. - 5 p.m. CST Email: contact@diodedynamics.com Phone: 314-205-3033
Fabulous Products. The build quality is remarkable and the 8 year warranty is light years ahead of the competition - excuse the pun!
We appreciate the support! 🙌🙌
Can you provide a link to the wiring loom/wiring harness that can provide the three light functions (white/red accent/brake -strobe/solid red), for my pair or CR1 Pods. I have a UK Ford Ranger! Thanks in advance.
We have not had the chance to confirm fitment with our UK friends yet. However, you are more than welcome to try it out!
I'll send you the link to the kit:
www.diodedynamics.com/hitchmount-led-pod-reverse-kit.html
(Be sure to select C1R +Brake to get all the functions you are asking for!)
@@diodedynamics think I will use the Trigger 1 wire on my Switch-Pros 9100 to provide the Brake function and introduce that signal trigger into the harness fed to the two C1Rs
Can you please provide a link to order just the wiring harness for these? The wiring harness that plugs into the existing 7-pin trailer connection please. I have the complete kit, brackets and LED pods but can’t find the wiring harness for it.
Hey there! Here is the link for our Dual-output harness with a 7-pin in-line:
www.diodedynamics.com/stage-series-7-pin-dual-output-trailer-wiring-harness.html
If you have our C1R pods, here is the link to the harness for those:
www.diodedynamics.com/stage-series-c1r-7-pin-dual-output-trailer-wiring-harness.html
@@diodedynamics Thank you very much
What size is the bolt that attaches the light to the small triangle bracket. The one with the nyloc nut and Allen head? Both my bolts snapped during installation.
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that.
had you kit for 2weeks now and still can get the time to install it.either its raining(alot)or scorthing hot or both but will send a little vid when ever i do get it install
Can't wait to see it installed! Be sure to tag us!
@@diodedynamics ruclips.net/video/_R3AxKh_I_g/видео.html&ab_channel=donearl
I would love to see you manufacture a rear “fog” version of this or the hitch light. If you google Audi Q5 rear fog lights you’ll see what I mean. So basically it would always be in bright mode. When put in reverse, it would switch to backup light. Thanks
We can look into that for future products! We do offer replacement lenses as well, so you can always make that switch yourself in under 5 minutes!
Here is the link to our replacement lenses:
www.diodedynamics.com/clear-lens-for-stage-series-c1-pods-one.html
you should make a kit that fits on the front tow hooks of the Ram 1500
We can absolutely pass that along to our team!
Do the C2 pods also have the 4th brake light option? Or do I have to get the single pods to have the extra brake lights?
Not at this time, however our engineering team might be working on something. Stay tuned!
Is there a way to not have the red accent lighting I only want the reverse lights.
Hey there! We recommend opting for the SSC1 kit, then snip the Blue wire from DT wiring harness!
I have just purchased this along with the hitch mount light. I didn't think this thru, but can I connect both light kits? I don't see it possible. Piggy back, if so, then one plug-ins on the harness would be left out, right? Please advise. Thank you
Absolutely! You shouldn't have any power draw issues if you piggyback the harnesses together. We have employees here that run the same setup flawlessly!
Only thing it’s missing is turning signal flash. That’s why I have my opt7 light bar is for the added turn signal
With only having a single output light, this kit has no way to have turn signal options. The Opt7 tailgate bar is a goo option for extra turn signals. We do offer a much brighter option for your factory turn signals as well! Check them out in the link below:
www.diodedynamics.com/led-bulbs/turn-signal-and-switchback.html
My C1R light will not strobe when I press the brakes. I bought the product from a vendor of yours. The purple wire is intact/connected. The vendor requested DD to send me a new harness. I installed said harness and the lights still will not strobe. On the box for my lights, it says Stage Series C1 lights, but the scan label says C1R.
Can you please assist and help me troubleshoot?
Hey there! Sorry to hear about that!
Please go ahead and give us a call at 314-205-3033, Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that.
Hours: Monday-Friday 10 a.m. - 5 p.m. CST
Email: contact@diodedynamics.com
Phone: 314-205-3033
If i already have the hitchmount light, can these use the same trailer plug for these light hook ups?
You can piggy-back the DD 7-pin harnesses together to wire up both the reverse light kit, as well as the HitchMount!
Can you also attack a wire kit to run to a switch. Also is this gonna throw any codes on newer rams
If you are looking for manual functionality, take a look at our universal reverse light wiring kit! I'll link the product below.
Additionally, we have not had any reports of the newer Rams throwing codes with the HitchMount installed!
www.diodedynamics.com/reverse-light-wiring-kit-w-running-light.html
With this kit, could you still possibly use a Tailgate LED lightbar?
As long as it is not hindering the use of your 7-pin trailer harness, this kit should work in sync with a tailgate lightbar!
Will this fit with the under bumper step that comes with the Multifunction Tailgate?
Great question! Since this kit is mounted on the inward side of the dual rear exhaust, this kit should not interfere with the drop down bumper step included on some models!
@@diodedynamics the trucks with the Multifunction tailgate have a step on the inboard side of the dual exhaust…seemingly right where the light is. Some models without the MFTG have a step on the outside corner of the driver side, which would definitely not interfere.
@@tjkoen01 After checking, you are correct! We apologize for the confusion. The reverse light kit may not work for that model. Unfortunately, we have not had a Ram in that trim in our engineering garage for testing yet. We can definitely pass that along and work on another option in the future! Stay tuned!
@@diodedynamics I’ve got one you can test on 😬
@@tjkoen01 Great! If you are local to us in St. Louis, you can apply to be a tester below:
www.diodedynamics.com/testing
Anybody else having issues here with their light strobing when stepping on your brakes?
Did you purchase the SSC1 pod or the C1R pods?
If you ordered the C1R pods, and they are not strobing, please go ahead and give our customer service team a call and they'll be happy to help you with that!
Hours: Monday-Friday 10 a.m. - 5 p.m. CST
Email: contact@diodedynamics.com
Phone: 314-205-3033